Optimal design of bi-layer interconnector for SOFC based on CFD-Taguchi method

In order to reduce the concentration polarization of SOFC, a novel SOFC with bi-layer interconnector is presented. This novel bi-layer interconnector can disturb the fuel and air gas flow in the direction which is normal to the SOFC triple-layer and enhance the mass transfer effectively. In this paper, the effect of bi-layer interconnector on the performance of SOFC is investigated with computational fluid dynamics (CFD) method. Three controllable parameters of interconnector are considered. Each parameter has five levels. The Taguchi method is used as a systematic approach to plan and analyze the CFD results. The numerical results show that the novel interconnector can enhance the mass transfer in porous electrode, reduce the concentration polarization of SOFC, and improve the performance of SOFC. The Taguchi method can reduce the calculation model amount and the calculation time significantly. The optimal levels of controllable parameters for bi-layer interconnects are determined. The contribution ratio of rib height H is the most significant one, for which more attention should be paid during the design and operation stages.

[1]  Geert Versteeg,et al.  The use of the dusty-gas model for the description of mass transport with chemical reaction in porous media , 1995 .

[2]  David A. J. Rand,et al.  The hydrogen economy: a threat or an opportunity for lead–acid batteries? , 2005 .

[3]  R. Kee,et al.  A general mathematical model for analyzing the performance of fuel-cell membrane-electrode assemblies , 2003 .

[4]  M. Chyu,et al.  To Achieve the Best Performance Through Optimization of Gas Delivery and Current Collection in Solid Oxide Fuel Cells , 2006 .

[5]  T. R. Bement,et al.  Taguchi techniques for quality engineering , 1995 .

[6]  Xiangyang Zhou,et al.  Mathematical analysis of planar solid oxide fuel cells , 2008 .

[7]  Nigel M. Sammes,et al.  SOFC mathematic model for systems simulations-Part 2: definition of an analytical model , 2005 .

[8]  Carl M. Stoots,et al.  3D CFD model of a multi-cell high-temperature electrolysis stack , 2007 .

[9]  I. Dincer,et al.  Mathematical modeling of planar solid oxide fuel cells , 2006 .

[10]  Murat Peksen,et al.  Numerical modelling and experimental validation of a planar type pre-reformer in SOFC technology , 2009 .

[11]  Maria G. Medeiros,et al.  Optimization of the magnesium-solution phase catholyte semi-fuel cell for long duration testing , 2001 .

[12]  Ibrahim Dincer,et al.  A general electrolyte–electrode-assembly model for the performance characteristics of planar anode-supported solid oxide fuel cells , 2009 .

[13]  Minking K. Chyu,et al.  Electrochemical and Transport Phenomena in Solid Oxide Fuel Cells , 2005 .

[14]  Jianlong Wang,et al.  Optimization of fermentative hydrogen production process using genetic algorithm based on neural network and response surface methodology , 2009 .

[15]  M. Fowler,et al.  Performance comparison of Fick’s, dusty-gas and Stefan–Maxwell models to predict the concentration overpotential of a SOFC anode , 2003 .

[16]  S. Kaytakoğlu,et al.  Optimization of parametric performance of a PEMFC , 2007 .

[17]  D. Stamatis,et al.  Orthogonal Arrays and Linear Graphs , 2002 .

[18]  Ibrahim Dincer,et al.  A numerical investigation of modeling an SOFC electrode as two finite layers , 2009 .

[19]  D. Jeon.  A comprehensive CFD model of anode-supported solid oxide fuel cells , 2009 .

[20]  Ioannis K. Kookos,et al.  Modelling mass transport in solid oxide fuel cell anodes: a case for a multidimensional dusty gas-based model , 2008 .

[21]  S. Campanari,et al.  Experimental analysis and modeling for a circular-planar type IT-SOFC , 2007 .

[22]  Yoshio Matsuzaki,et al.  Evaluation and modeling of performance of anode-supported solid oxide fuel cell , 2000 .

[23]  Bengt Sundén,et al.  Three-dimensional computational analysis of gas and heat transport phenomena in ducts relevant for anode-supported solid oxide fuel cells , 2003 .

[24]  Peiwen Li,et al.  An easy-to-approach and comprehensive model for planar type SOFCs , 2009 .

[25]  S. Chan,et al.  Polarization effects in electrolyte/electrode-supported solid oxide fuel cells , 2002 .

[26]  Alex C. Hoffmann,et al.  Numerical analysis of a planar anode-supported SOFC with composite electrodes , 2009 .