The Development of a Coupled Geomechanics and Reservoir Simulator Using a Staggered Grid Finite Difference Approach

[1]  Albert C. Reynolds,et al.  Optimal control of ICV's and well operating conditions for the water-alternating-gas injection process , 2017 .

[2]  A. C. Bumb,et al.  Stress-Dependent Permeability and Porosity of Coal and Other Geologic Formations , 1988 .

[3]  C. Sarica,et al.  Investigation of inhibitors efficacy in wax deposition mitigation using a laboratory scale flow loop , 2016 .

[4]  Stefan Z. Miska,et al.  Parametric study of controllable parameters in fracture-based wellbore strengthening , 2017 .

[5]  Boyun Guo,et al.  Real-time optimization of drilling parameters based on mechanical specific energy for rotating drilling with positive displacement motor in the hard formation , 2016 .

[6]  Robello Samuel,et al.  Casing Integrity: Strain-Based Fatigue Life Estimation Coupled with Numerical Thermal-Flow Simulation and Multistring Stress Analysis , 2015 .

[7]  Feifei Zhang,et al.  Applying Data-Driven Method to Production Decline Analysis and Forecasting , 2016 .

[8]  Yousef Saad,et al.  Iterative methods for sparse linear systems , 2003 .

[9]  Jianjun Zhu,et al.  Mechanistic modeling and numerical simulation of in-situ gas void fraction inside ESP impeller , 2016 .

[10]  Xiuli Gai,et al.  A coupled geomechanics and reservoir flow model on parallel computers , 2004 .

[11]  D. Gao,et al.  Mega-Extended-Reach Drilling to Deepwater Target: What is the Well's Maximum Allowable Measured Depth While Drilling? , 2016 .

[12]  Zhaorui Shi,et al.  Hidden Impact of Mud Loss on Wellbore State of Stresses Disclosed by Thermal-Poro-Elastic Modeling , 2015 .

[13]  M. J. King,et al.  Rapid Refracturing Candidate Selection in Shale Reservoirs Using Drainage Volume and Instantaneous Recovery Ratio , 2016 .

[14]  Albert C. Reynolds,et al.  Ensemble-Based Optimization of the Water-Alternating-Gas-Injection Process , 2016 .

[15]  S. Miska,et al.  Real-Time Wellbore Stability Evaluation for Deepwater Drilling During Tripping , 2016 .

[16]  Hossein Jalalifar,et al.  Drilling Optimization Based on a Geomechanical Analysis using Probabilistic Risk Assessment, A Case Study from Offshore Iran , 2014 .

[17]  Kenneth E. Gray,et al.  A Review on Fracture-Initiation and -Propagation Pressures for Lost Circulation and Wellbore Strengthening , 2016 .

[18]  Yu Zhao,et al.  History matching of multi-facies channelized reservoirs using ES-MDA with common basis DCT , 2017, Computational Geosciences.

[19]  Jianjun Zhu,et al.  Numerical Study on Electrical-Submersible-Pump Two-Phase Performance and Bubble-Size Modeling , 2017 .

[20]  Guotong Ren,et al.  A Fully Coupled XFEM-EDFM Model for Multiphase Flow and Geomechanics in Fractured Tight Gas Reservoirs , 2016, ICCS.

[21]  Nasser M. Al-Khanferi,et al.  Modeling Transient Circulating Mud Temperature in the Event of Lost Circulation and its Application in Locating Loss Zones , 2014 .

[22]  Kenneth E. Gray,et al.  A fracture-mechanics-based model for wellbore strengthening applications , 2016 .

[23]  Roland W. Lewis,et al.  The Role of Geomechanics in Reservoir Simulation , 1998 .

[24]  M. R. Pishvaie,et al.  The Effects of Various Parameters on Wellbore Stability During Drilling Through Shale Formations , 2015 .

[25]  S. Miska,et al.  Modeling of near-wellbore fracturing for wellbore strengthening , 2017 .

[26]  A Fully-Coupled Geomechanics and Flow Model for Hydraulic Fracturing and Reservoir Engineering Applications , 2010 .

[28]  C. Sarica,et al.  Effect of the Flow Field on the Wax Deposition and Performance of Wax Inhibitors: Cold Finger and Flow Loop Testing , 2017 .

[29]  S. Miska,et al.  Effective Enhancement of Wellbore Stability in Shales with New Families of Nanoparticles , 2016 .