Dual drug release from electrospun poly(lactic-co-glycolic acid)/mesoporous silica nanoparticles composite mats with distinct release profiles.

The aim of this study was to fabricate dual drug-loaded poly(lactic-co-glycolic acid) (PLGA)/mesoporous silica nanoparticles (MSNs) electrospun composite mat, with the two model drugs (fluorescein (FLU) and rhodamine B (RHB)) releasing in separate and distinct release kinetics. The PLGA-based electrospun mat loading with the same amount of FLU (5%, with respect to the weight of PLGA) and different amounts of RHB-loaded MSNs (5, 15 and 25%, with respect to the weight of PLGA) were prepared and studied for their releasing properties. The morphology of the composite mats was characterized by scanning electron microscopy and transmission electron microscopy. Finally, the release profiles of the dual drug-loaded electrospun mats were measured, and the results indicated that the FLU and RHB released from the PLGA/FLU/RHB-loaded MSNs electrospun mats showed separate and distinct profiles. Most of the FLU was released rapidly during the 324 h of the trial; however, RHB showed a sustained release behavior, and the release rate could be controlled by the content of the RHB-loaded MSNs in the electrospun mat.

[1]  Jun-Jian Liu,et al.  Peripheral nerve regeneration using composite poly(lactic acid-caprolactone)/nerve growth factor conduits prepared by coaxial electrospinning. , 2011, Journal of biomedical materials research. Part A.

[2]  S. Ramakrishna,et al.  Coaxial electrospinning of (fluorescein isothiocyanate-conjugated bovine serum albumin)-encapsulated poly(epsilon-caprolactone) nanofibers for sustained release. , 2006, Biomacromolecules.

[3]  C Rossi,et al.  Improvement of dissolution rate of piroxicam by inclusion into MCM-41 mesoporous silicate. , 2007, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

[4]  Xiabin Jing,et al.  The release behavior of doxorubicin hydrochloride from medicated fibers prepared by emulsion-electrospinning. , 2008, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

[5]  V. Rives,et al.  Influence of the inorganic matrix nature on the sustained release of naproxen , 2010 .

[6]  Chun Gwon Park,et al.  A nanofibrous sheet-based system for linear delivery of nifedipine. , 2011, Journal of controlled release : official journal of the Controlled Release Society.

[7]  Horst A von Recum,et al.  Electrospinning: applications in drug delivery and tissue engineering. , 2008, Biomaterials.

[8]  Darrell H. Reneker,et al.  Bending instability of electrically charged liquid jets of polymer solutions in electrospinning , 2000 .

[9]  E. Zussman,et al.  Material encapsulation and transport in core-shell micro/nanofibers, polymer and carbon nanotubes and micro/nanochannels , 2007 .

[10]  Jiaping Lin,et al.  Dual-drug delivery system based on hydrogel/micelle composites. , 2009, Biomaterials.

[11]  Yufang Zhu,et al.  Stimuli-responsive controlled drug release from a hollow mesoporous silica sphere/polyelectrolyte multilayer core-shell structure. , 2005, Angewandte Chemie.

[12]  A. Yarin,et al.  Desorption-limited mechanism of release from polymer nanofibers. , 2008, Langmuir : the ACS journal of surfaces and colloids.

[13]  K. Leong,et al.  Electrohydrodynamics: A facile technique to fabricate drug delivery systems. , 2009, Advanced drug delivery reviews.

[14]  Yen Wei,et al.  One-dimensional composite nanomaterials: synthesis by electrospinning and their applications. , 2009, Small.

[15]  Yan Li,et al.  A facile technique to prepare biodegradable coaxial electrospun nanofibers for controlled release of bioactive agents. , 2005, Journal of controlled release : official journal of the Controlled Release Society.

[16]  Shaobing Zhou,et al.  Structural stability and release profiles of proteins from core-shell poly (DL-lactide) ultrafine fibers prepared by emulsion electrospinning. , 2008, Journal of biomedical materials research. Part A.

[17]  Satoru Kidoaki,et al.  Time-programmed dual release formulation by multilayered drug-loaded nanofiber meshes. , 2010, Journal of controlled release : official journal of the Controlled Release Society.

[18]  Carlo Rossi,et al.  MCM-41 for furosemide dissolution improvement , 2012 .

[19]  Shaobing Zhou,et al.  Investigation of drug release and matrix degradation of electrospun poly(DL-lactide) fibers with paracetanol inoculation. , 2006, Biomacromolecules.

[20]  Andreas Greiner,et al.  Compound Core–Shell Polymer Nanofibers by Co‐Electrospinning , 2003 .

[21]  H. Fong,et al.  Preparation, characterization, and encapsulation/release studies of a composite nanofiber mat electrospun from an emulsion containing poly (lactic-co-glycolic acid). , 2008, Polymer.

[22]  Yaping Li,et al.  Intracellular localization and cytotoxicity of spherical mesoporous silica nano- and microparticles. , 2009, Small.

[23]  何前军.  Intracellular Localization and Cytotoxicity of Spherical Mesoporous Silica Nano- and Microparticles , 2009 .

[24]  Di Zhang,et al.  Grafting of thermo-responsive polymer inside mesoporous silica with large pore size using ATRP and investigation of its use in drug release , 2007 .

[25]  John Layman,et al.  Release of tetracycline hydrochloride from electrospun poly(ethylene-co-vinylacetate), poly(lactic acid), and a blend. , 2002, Journal of controlled release : official journal of the Controlled Release Society.

[26]  M. Vallet‐Regí,et al.  A New Property of MCM-41: Drug Delivery System , 2001 .

[27]  J. Jansen,et al.  Fibrous scaffolds loaded with protein prepared by blend or coaxial electrospinning. , 2010, Acta biomaterialia.

[28]  Zongxi Li,et al.  Biocompatibility, biodistribution, and drug-delivery efficiency of mesoporous silica nanoparticles for cancer therapy in animals. , 2010, Small.

[29]  A. Yarin.  Coaxial electrospinning and emulsion electrospinning of core–shell fibers , 2011 .

[30]  A. Yarin,et al.  Mechanistic examination of protein release from polymer nanofibers. , 2009, Molecular pharmaceutics.

[31]  Kwangsok Kim,et al.  Incorporation and controlled release of a hydrophilic antibiotic using poly(lactide-co-glycolide)-based electrospun nanofibrous scaffolds. , 2004, Journal of controlled release : official journal of the Controlled Release Society.

[32]  J. Eriksson,et al.  Targeted intracellular delivery of hydrophobic agents using mesoporous hybrid silica nanoparticles as carrier systems. , 2009, Nano letters.

[33]  Yantao Shi,et al.  The size-controllable synthesis of nanometer-sized mesoporous silica in extremely dilute surfactant solution , 2010 .

[34]  Monty Liong,et al.  Mesoporous silica nanoparticles as a delivery system for hydrophobic anticancer drugs. , 2007, Small.

[35]  Qingsheng Wu,et al.  Encapsulating drugs in biodegradable ultrafine fibers through co-axial electrospinning. , 2006, Journal of biomedical materials research. Part A.

[36]  Jianlin Shi,et al.  Mesoporous silica nanoparticle based nano drug delivery systems: synthesis, controlled drug release and delivery, pharmacokinetics and biocompatibility , 2011 .

[37]  Bin Ding,et al.  Nanoporous ultra-high specific surface inorganic fibres , 2007 .

[38]  Y. Tabata,et al.  In vivo anti-tumor effect of dual release of cisplatin and adriamycin from biodegradable gelatin hydrogel. , 2005, Journal of controlled release : official journal of the Controlled Release Society.

[39]  K. Leong,et al.  Sustained viral gene delivery through core-shell fibers. , 2009, Journal of controlled release : official journal of the Controlled Release Society.

[40]  Juan L. Vivero-Escoto,et al.  Mesoporous silica nanoparticles as controlled release drug delivery and gene transfection carriers. , 2008, Advanced drug delivery reviews.

[41]  S. Ramakrishna,et al.  Electrospun nanofibers in energy and environmental applications , 2008 .

[42]  X. Ji,et al.  A pH-responsive mesoporous silica nanoparticles-based multi-drug delivery system for overcoming multi-drug resistance. , 2011, Biomaterials.

[43]  Joachim Kohn,et al.  Electrospun nanofibrous polymeric scaffold with targeted drug release profiles for potential application as wound dressing. , 2008, International journal of pharmaceutics.

[44]  Jiang Chang,et al.  Electrospun nanofibrous materials for tissue engineering and drug delivery , 2010, Science and technology of advanced materials.