Axial compression testing and constitutive model of a novel BF-reinforced ambient-cured LEGC

[1]  Yao Guo,et al.  Investigating stress–strain relationship and damage constitutive model of basalt fiber reinforced concrete under uniaxial compression , 2023, Journal of Building Engineering.

[2]  Mahmood Hunar Dheyaaldin,et al.  The effects of nanomaterials on the characteristics of aluminosilicate-based geopolymer composites: A critical review , 2023, Journal of Building Engineering.

[3]  Tengyu Ma,et al.  Understanding the changes in engineering behaviors and microstructure of FA-GBFS based geopolymer paste with addition of silica fume , 2023, Journal of Building Engineering.

[4]  T. El-Maaddawy,et al.  Flexural and shear performance of geopolymer concrete reinforced with hybrid glass fibers , 2023, Journal of Building Engineering.

[5]  Z. Zhong,et al.  Investigation on early-age cracking resistance of basalt-polypropylene fiber reinforced concrete in restrained ring tests , 2023, Journal of Building Engineering.

[6]  P. Chindaprasirt,et al.  Enhancing the properties of fly ash-based geopolymer concrete using recycled aggregate from waste ceramic electrical insulator , 2023, Journal of Building Engineering.

[7]  Zhishen Wu,et al.  Experimental study on pullout behaviour of basalt fiber-reinforced polymers minibar embedded in ultra-high performance seawater sea-sand concrete , 2023, Journal of Building Engineering.

[8]  Chen Wu,et al.  Monotonic and cyclic compressive behavior of ultra-high performance concrete with coarse aggregate: Experimental investigation and constitutive model , 2023, Journal of Building Engineering.

[9]  L. Jin,et al.  Experimental study on compression failure characteristics of basalt fibre-reinforced lightweight aggregate concrete: Influences of strain-rate and structural size , 2023, Cement and Concrete Composites.

[10]  Xiaopei Huang,et al.  Mechanical properties and uniaxial constitutive model of fiber‐reinforced coral aggregate concrete , 2022, Structural Concrete.

[11]  Wensu Chen,et al.  Static and dynamic properties of novel ambient-cured lightweight geopolymer composites with fibre reinforced epoxy coated EPS aggregates , 2022, Composites Part B: Engineering.

[12]  Linfu Xie,et al.  Experimental study and theoretical analysis on dynamic mechanical properties of basalt fiber reinforced concrete , 2022, Journal of Building Engineering.

[13]  Yong Feng,et al.  The synergistic strengthening effect of silane coupling agent on the interface between PVA/EPS and cement: experiment and molecular simulation , 2022, Composite Interfaces.

[14]  Musaad Zaheer Nazir Khan,et al.  Physical and Mechanical Properties of New Lightweight Ambient-Cured EPS Geopolymer Composites , 2021 .

[15]  Z. Deng,et al.  Mechanical properties and constitutive model of carbon fiber reinforced coral concrete under uniaxial compression , 2020, Construction and Building Materials.

[16]  A. Rawal,et al.  Predictive Model of Setting Times and Compressive Strengths for Low-Alkali, Ambient-Cured, Fly Ash/Slag-Based Geopolymers , 2020, Minerals.

[17]  Chunyan Xie,et al.  Orthogonal Analysis on Mechanical Properties of Basalt–Polypropylene Fiber Mortar , 2020, Materials.

[18]  S. Shahbeyk,et al.  Uniaxial and triaxial failure strength of fiber reinforced EPS concrete , 2020, Construction and Building Materials.

[19]  Wengui Li,et al.  Investigation on dynamic mechanical properties of fly ash/slag-based geopolymeric recycled aggregate concrete , 2020, Composites Part B: Engineering.

[20]  A. Tagnit-Hamou,et al.  Characterization and nano-engineering the interface properties of PVA fibers in strain-hardening cementitious composites incorporating high-volume ground-glass pozzolans , 2020 .

[21]  M. S. Ali,et al.  Cracking behaviour and constitutive modelling of hybrid fibre reinforced concrete , 2020 .

[22]  S. Pirmohammad,et al.  The effect of basalt fibres on fracture toughness of asphalt mixture , 2020 .

[23]  F. Aslani,et al.  Development of Lightweight Rubberized Geopolymer Concrete by Using Polystyrene and Recycled Crumb-Rubber Aggregates , 2020 .

[24]  P. Xiang,et al.  Mechanical behavior and constitutive relationship of the three types of recycled coarse aggregate concrete based on standard classification , 2019, Journal of Material Cycles and Waste Management.

[25]  V. Li,et al.  Derivation of Crack Bridging Stresses in Fiber Reinforced Cementitious Composites under Combined Opening and Shear Displacements , 2017 .

[26]  Musaad Zaheer Nazir Khan,et al.  Synthesis of high strength ambient cured geopolymer composite by using low calcium fly ash , 2016 .

[27]  Ting Huang,et al.  Effect of Slip-Hardening Interface Behavior on Fiber Rupture and Crack Bridging in Fiber-Reinforced Cementitious Composites , 2015 .

[28]  X. Zhao,et al.  Effect of size on the response of cylindrical concrete samples under cyclic loading , 2015 .

[29]  O. Kayali,et al.  Effect of initial water content and curing moisture conditions on the development of fly ash-based geopolymers in heat and ambient temperature , 2014 .

[30]  Prabir Sarker,et al.  Effect of GGBFS on setting, workability and early strength properties of fly ash geopolymer concrete cured in ambient condition , 2014 .

[31]  C. Wang,et al.  Effect of strain rate on splitting tensile strength of geopolymer concrete , 2014 .

[32]  Haoxiang He,et al.  Constitutive Relation of Engineering Material Based on SIR Model and HAM , 2014, J. Appl. Math..

[33]  R. He,et al.  Damage evolution model of strain hardening cementitious composites under the uniaxial stress state , 2013, International Journal of Minerals, Metallurgy, and Materials.

[34]  Shazim Ali Memon,et al.  Analytical model for compressive strength, elastic modulus and peak strain of structural lightweight aggregate concrete , 2012 .

[35]  Jadambaa Temuujin,et al.  Preparation and characterisation of fly ash based geopolymer mortars , 2010 .

[36]  B. Chen,et al.  Contribution of fibres to the properties of EPS lightweight concrete , 2009 .

[37]  John L. Provis,et al.  Correlating mechanical and thermal properties of sodium silicate-fly ash geopolymers , 2009 .

[38]  Giang D. Nguyen,et al.  Coupled damage and plasticity models derived from energy and dissipation potentials , 2007 .

[39]  K. Ganesh Babu,et al.  Properties of lightweight expanded polystyrene aggregate concretes containing fly ash , 2005 .

[40]  C. Boulay,et al.  Taking into account the inclusions' size in lightweight concrete compressive strength prediction , 2005 .

[41]  Bing Chen,et al.  Properties of lightweight expanded polystyrene concrete reinforced with steel fiber , 2004 .

[42]  D. Palermo,et al.  COMPRESSION FIELD MODELING OF REINFORCED CONCRETE SUBJECTED TO REVERSED LOADING: FORMULATION , 2004 .

[43]  Victor C. Li,et al.  EFFECT OF FIBER STRENGTH AND FIBER-MATRIX INTERFACE ON CRACK BRIDGING IN CEMENT COMPOSITES , 1999 .

[44]  J. Oliver,et al.  A strain-based plastic viscous-damage model for massive concrete structures , 1998 .

[45]  C. Hsu,et al.  STRESS-STRAIN BEHAVIOR OF CONCRETE UNDER CYCLIC LOADING , 1998 .

[46]  Antoine E. Naaman,et al.  PROPERTIES OF STEEL FIBER REINFORCED CONCRETE UNDER CYCLIC LOADING , 1988 .

[47]  Michael Ortiz,et al.  A constitutive theory for the inelastic behavior of concrete , 1985 .

[48]  T. A. Dar,et al.  Development of Fly Ash based Geopolymer Concrete , 2017 .

[49]  Christopher K.Y. Leung,et al.  A new model for the cracking process and tensile ductility of Strain Hardening Cementitious Composites (SHCC) , 2016 .

[50]  J. Chermant,et al.  Damage mechanics applied to concrete reinforced with amorphous cast iron fibers, concrete subjected to compression , 1999 .

[51]  V. Li,et al.  On Interface Property Characterization and Performance of Fiber Reinforced Cementitious Composites , 1999 .

[52]  H. Reinhardt,et al.  Uniaxial behavior of concrete in cyclic tension , 1989 .

[53]  J. Ju,et al.  On energy-based coupled elastoplastic damage theories: Constitutive modeling and computational aspects , 1989 .