Dispersion, connectivity and tortuosity of hierarchical porosity composite SOFC cathodes prepared by freeze-casting

Abstract Aqueous co-dispersions of Lanthanum Strontium Manganite (LSM) and Yttria-Stabilized Zirconia (YSZ) were freeze-cast and partially sintered, resulting in anisotropic, hierarchically porous composites for potential applications as solid oxide fuel cell (SOFC) cathodes. The uniform phase dispersion was validated using SEM–EDS and FIB-SEM tomography. Using reconstructed 3D images of samples sintered at 1200 and 1300 °C, the effect of sintering on phase connectivity, triple phase boundary (TPB) density and phase tortuosity was explored. The higher sintering temperature resulted in lower TPB density and, less open pore volume but decreased tortuosity for both the LSM and YSZ due to densification of the structure at high temperatures. Due to the unique double-sided morphology of the freeze-cast walls and the benefits gained from less tortuous percolation paths, a decrease in TPB density and open porosity from elevated sintering temperatures may not degrade the electrochemical performance as much as it would for a standard isotropic microstructure.

[1]  Svein Sunde,et al.  Monte Carlo Simulations of Polarization Resistance of Composite Electrodes for Solid Oxide Fuel Cells , 1996 .

[2]  Eduardo Saiz,et al.  Freezing as a Path to Build Complex Composites , 2006, Science.

[3]  D. Mumm,et al.  Microstructural Optimization by Tailoring Particle Sizes for LSM-YSZ Solid Oxide Fuel Cell Composite Cathodes , 2011 .

[4]  Scott A. Barnett,et al.  Effect of composition of (La0.8Sr0.2MnO3–Y2O3-stabilized ZrO2) cathodes: Correlating three-dimensional microstructure and polarization resistance , 2010 .

[5]  F. Lange,et al.  Effect of Silica Nanoparticle Size on the Stability of Alumina/Silica Suspensions , 2001 .

[6]  F. Snijkers,et al.  Aqueous tape casting of yttria stabilised zirconia using natural product binder , 2004 .

[7]  Prabhakar Singh,et al.  Sintering of porous strontium doped lanthanum manganite-yttria stabilized zirconia composite in controlled oxygen atmosphere at 1400 °C , 2013 .

[8]  K. Wiik,et al.  Reactions between Strontium‐Substituted Lanthanum Manganite and Yttria‐Stabilized Zirconia: II, Diffusion Couples , 2004 .

[9]  Moses Ender,et al.  Representative volume element size for accurate solid oxide fuel cell cathode reconstructions from focused ion beam tomography data , 2012 .

[10]  V. Dravid,et al.  Effect of Firing Temperature on LSM-YSZ Composite Cathodes: A Combined Three-Dimensional Microstructure and Impedance Spectroscopy Study , 2012 .

[11]  Jon M. Hiller,et al.  Three-dimensional reconstruction of a solid-oxide fuel-cell anode , 2006, Nature materials.

[12]  Christophe L. Martin,et al.  Pore size distributions calculated from 3-D images of DEM-simulated powder compacts , 2003 .

[13]  Sylvain Deville,et al.  Freeze-Casting of Porous Ceramics: A Review of Current Achievements and Issues , 2008, 1710.04201.

[14]  M. Awano,et al.  Preparation of NiO–YSZ tubular support with radially aligned pore channels , 2003 .

[15]  S. Sofie,et al.  Thin film YSZ coatings on functionally graded freeze cast NiO/YSZ SOFC anode supports , 2009 .

[16]  Dominique Houzet,et al.  Investigating performance variations of an optimized GPU-ported granulometry algorithm , 2012, Proceedings of the 2012 Conference on Design and Architectures for Signal and Image Processing.

[17]  R. Bordia,et al.  Processing of Hierarchical and Anisotropic Porosity LSM‐YSZ Composites , 2013 .

[18]  P. Sarkar,et al.  Effects of calcination and milling on surface properties, rheological behaviour and microstructure of 8 mol% yttria-stabilised zirconia (8 YSZ) , 2012 .

[19]  Konrad Steiner,et al.  A multi-scale approach to material modeling of fuel cell diffusion media , 2011 .

[20]  R. Oberacker,et al.  Control of Lamellae Spacing During Freeze Casting of Ceramics Using Double‐Side Cooling as a Novel Processing Route , 2009 .

[21]  Yann Bultel,et al.  Discrete modelling of the electrochemical performance of SOFC electrodes , 2006 .

[22]  Joyce Smith Cooper,et al.  Taxonomies of SOFC material and manufacturing alternatives , 2005 .

[23]  S. Sofie,et al.  A symmetrical, planar SOFC design for NASA's high specific power density requirements , 2007 .

[24]  R. McMeeking,et al.  Impact of particle size ratio and volume fraction on effective material parameters and performance in solid oxide fuel cell electrodes , 2012 .

[25]  Wilson K. S. Chiu,et al.  Characterization and analysis methods for the examination of the heterogeneous solid oxide fuel cell electrode microstructure. Part 1: Volumetric measurements of the heterogeneous structure , 2010 .

[26]  Michael Unser,et al.  A pyramid approach to subpixel registration based on intensity , 1998, IEEE Trans. Image Process..

[27]  B. Su,et al.  Tailored graded pore structure in zirconia toughened alumina ceramics using double-side cooling freeze casting , 2012 .

[28]  R. Oberacker,et al.  Investigation of structure formation during freeze-casting from very slow to very fast solidification velocities , 2011 .

[29]  S. Barnett,et al.  Firing Temperature Effect on 3D Microstructure and Performance of LSM-YSZ Composite SOFC Cathodes , 2011 .

[30]  Tingshuai Li,et al.  Novel functionally graded acicular electrode for solid oxide cells fabricated by the freeze-tape-casting process , 2012 .

[31]  S. Barnett,et al.  Linking the microstructure, performance and durability of Ni-yttria-stabilized zirconia solid oxide fuel cell anodes using three-dimensional focused ion beam–scanning electron microscopy imaging , 2011 .

[32]  S. Bonnamy,et al.  Effect of Ni content in SOFC Ni-YSZ cermets: A three-dimensional study by FIB-SEM tomography , 2011 .

[33]  S. Ramanathan,et al.  Studies on slip casting behavior of lanthanum strontium manganite , 2011 .