Most practical MEMS actuators generate forces ranging from several micronewrons to one or two millinewtons. In order to explore the feasibility of low-resistance contacts for MEMS relays, we explored the force-resistance relationship for gold-gold microfabricated contacts. The effect of apparent contact area on resistance has also been examined for areas between 10 and 90,000 /spl mu/m/sup 2/. The force/resistance relationship of these fully-microfabricated flat microcontacts correlates well with traditional theory and previous experimental results. The average measured resistance varied between 20.5 m/spl Omega/ and 62.9 m/spl Omega/. Decreasing contact area and contact force lead to higher overall contact resistance. However, reducing the apparent contact area by orders of magnitude only had a marginal effect on the overall contact resistance, even when the apparent contact area was orders of magnitude less than the theoretical actual contact area (/spl pi/r/sub c//sup 2/). Furthermore, the force required for a stable microcontact was determined to be below 0.6 mN and therefore within the force range of a MEMS actuator.
[1]
H C Angus.
Surface films on precious-metal contacts
,
1962
.
[2]
R. Pease,et al.
Apparatus for studying ultrasmall contacts
,
1992,
Electrical Contacts - 1992 Proceedings of the Thirty-Eighth IEEE Holm Conference on Electrical Contacts.
[3]
Paul G. Slade,et al.
Electrical contacts : principles and applications
,
1999
.
[4]
Takuya Nakajima,et al.
Thermal buckling actuator for micro relays
,
1997,
Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).
[5]
K. Petersen.
Micromechanical membrane switches on silicon
,
1979
.