ACPTDF for Multi-transactions and ATC Determination in Deregulated Markets

Abstract—Available transfer capability in the transmission network has become essential quantity to be declared well in advance for its commercial use in a competitive electricity market. Its fast computation using DC load flow based approach is used worldwide for on line implementation. Many authors have proposed the ATC calculation based on DC/AC load flow approach. In this paper, AC PTDF based approach has been proposed for multi-transaction cases using power transfer sensitivity and Jacobian calculated with three different methods. The methods can be implemented for any number of transactions occurring simultaneously. The results have been determined for intact and line contingency cases taking multi-transaction/simultaneous as well as single transaction cases. The main contributions of the paper are: (i) ATC determination for multi-transactions environment, (ii) ATC determination and comparison with three approaches of PTDF calculations, (iii) LODFs with line contingency cases for multi-transaction environment and thereby ATC determination. The results have also been obtained with DC method for comparison. The proposed method have been applied for IEEE 24 bus RTS. Keywords: Available transfer capability, AC load flow, AC power transfer distribution factors , line outage contingency, line outage distribution factors, multi-transactions, simultaneous transactions. DOI: http://dx.doi.org/10.11591/ijece.v1i1.61 Full Text: PDF

[1]  Christopher L. DeMarco Identifying swing mode bifurcations and associated limits on available transfer capability , 1998, Proceedings of the 1998 American Control Conference. ACC (IEEE Cat. No.98CH36207).

[2]  Alexander J. Flueck,et al.  Investigating the installed real power transfer capability of a large scale power system under a proposed multiarea interchange schedule using CPFLOW , 1996 .

[3]  F. Alvarado,et al.  Computation of closest bifurcations in power systems , 1994 .

[4]  M. H. Gravener,et al.  Available transfer capability and first order sensitivity , 1999 .

[5]  Venkataramana Ajjarapu,et al.  The continuation power flow: a tool for steady state voltage stability analysis , 1991 .

[6]  S. C. Srivastava,et al.  Available Transfer Capability (ATC) Determination in a Competitive Electricity Market Using AC Distribution Factors , 2004 .

[7]  I. Wangensteen,et al.  Transmission management in the deregulated environment , 2000, Proceedings of the IEEE.

[8]  Seema Singh,et al.  Available transfer capability assessment in a competitive electricity market using a bifurcation approach , 2004 .

[9]  Marija D. Ilic,et al.  Available transmission capacity (ATC) and its value under open access , 1997 .

[10]  Peter W. Sauer,et al.  Enhancement of linear ATC calculations by the incorporation of reactive power flows , 2003 .

[11]  Seema Singh,et al.  Improved voltage and reactive power distribution factors for outage studies , 1997 .

[12]  Hsiao-Dong Chiang,et al.  CPFLOW: a practical tool for tracing power system steady-state stationary behavior due to load and generation variations , 1995 .

[13]  I. Hiskens,et al.  An Iterative Approach to Calculating Dynamic ATC , 1998 .

[14]  M. Shahidehpour,et al.  Restructured Electrical Power Systems: Operation: Trading, and Volatility , 2001 .

[15]  Thomas J. Overbye,et al.  An energy based security measure for assessing vulnerability to voltage collapse , 1990 .

[16]  Peter W. Sauer,et al.  Error analysis in electric power system available transfer capability computation , 1999, Decis. Support Syst..

[17]  G. C. Ejebe,et al.  Fast calculation of linear available transfer capability , 1999 .

[18]  Mohammad Shahidehpour,et al.  The IEEE Reliability Test System-1996. A report prepared by the Reliability Test System Task Force of the Application of Probability Methods Subcommittee , 1999 .

[19]  I. Dobson,et al.  Sensitivity of Transfer Capability Margins with a Fast Formula , 2002, IEEE Power Engineering Review.

[20]  Peter W. Sauer,et al.  Reactive power considerations in linear ATC computation , 1999, Proceedings of the 32nd Annual Hawaii International Conference on Systems Sciences. 1999. HICSS-32. Abstracts and CD-ROM of Full Papers.

[21]  G. A. Hamoud,et al.  Assessment of available transfer capability of transmission systems , 2000 .

[22]  Thomas J. Overbye,et al.  Assessment of transmission system loadability , 1997 .

[23]  F. Galiana,et al.  Power systems restructuring : engineering and economics , 1998 .

[24]  Robert Fischl,et al.  An inter-area transmission and voltage limitation (TVLIM) program , 1995 .