Forming of Stacked Unidirectional Prepreg Materials

To reduce cost of structural composites, the development of more efficient manufacturing methods is of great interest. An automatic tape layer (ATL) can be used to perform the layup in an efficient ...

[1]  Nuri Ersoy,et al.  An experimental method to study the frictional processes during composites manufacturing , 2005 .

[2]  Kevin D Potter,et al.  The use of kinematic drape modelling to inform the hand lay-up of complex composite components using woven reinforcements , 2006 .

[3]  M. Åkermo,et al.  On the in-plane deformability of cross-plied unidirectional prepreg , 2012 .

[4]  Li Xiao,et al.  A study on the effect of surface topography on rough friction in roller contact , 2003 .

[5]  In-plane and out-of-plane deformation properties of unidirectional preimpregnated reinforcement , 2002 .

[6]  Andrew C. Long,et al.  Composites forming technologies , 2007 .

[7]  Constantina Lekakou,et al.  Shear deformation and micromechanics of woven fabrics , 2000 .

[8]  Catherine A. Ploskonka,et al.  Fundamentals of Composites Manufacturing: Materials, Methods, and Applications , 1989 .

[9]  Ignace Verpoest,et al.  Experimental validation of forming simulations of fabric reinforced polymers using an unsymmetrical mould configuration , 2009 .

[10]  F. F. Ling,et al.  BOUNDARY LUBRICATION. AN APPRAISAL OF WORLD LITERATURE. , 1969 .

[11]  Philippe Boisse,et al.  Simulations of textile composite reinforcement draping using a new semi-discrete three node finite element , 2008 .

[12]  J. Huetink,et al.  Large deformation simulation of anisotropic material using an updated Lagrangian finite element method , 2007 .

[13]  K. Potter.  DEFORMATION MECHANISMS OF FIBRE REINFORCEMENTS AND THEIR INFLUENCE ON THE FABRICATION OF COMPLEX STRUCTURAL PARTS , 1980 .

[14]  Gilbert Lebrun,et al.  Evaluation of bias-extension and picture-frame test methods for the measurement of intraply shear properties of PP/glass commingled fabrics , 2003 .

[15]  I. Verpoest,et al.  Simulation of Multi-layered Composites Forming , 2010 .

[16]  Suresh G. Advani,et al.  Flow and rheology in polymer composites manufacturing , 1994 .

[17]  Emmanuelle Vidal-Salle,et al.  Simulation of wrinkling during textile composite reinforcement forming. Influence of tensile, in-plane shear and bending stiffnesses , 2011 .

[18]  Constitutive modelling of UD reinforced thermoplastic laminates , 2010 .

[19]  Kevin D Potter,et al.  Bias extension measurements on cross-plied unidirectional prepreg , 2002 .

[20]  Remko Akkerman,et al.  A multi-layer triangular membrane finite element for the forming simulation of laminated composites , 2009 .

[21]  H. M. Taylor,et al.  39—The Fitting of Woven Cloth to Surfaces , 1956 .

[22]  Jun Wang,et al.  The draping of woven fabric preforms and prepregs for production of polymer composite components , 1999 .

[23]  James A. Sherwood,et al.  Modeling of Friction and Shear in Thermostamping of Composites - Part I , 2004 .

[24]  M. Åkermo,et al.  On the interply friction of different generations of carbon/epoxy prepreg systems , 2011 .

[25]  Mpf Sutcliffe,et al.  A simplified rate dependent model of forming and wrinkling of pre-impregnated woven composites , 2007 .

[26]  B. T. Åström,et al.  Manufacturing of Polymer Composites , 1997 .

[27]  P. H. Shipway.  Tribology: Friction and Wear of Engineering Materials , 1992 .

[28]  Remko Akkerman,et al.  Finite Element Simulations of Laminated Composites Forming Processes , 2010 .

[29]  K. Potter,et al.  The engineering aspects of automated prepreg layup: History, present and future , 2012 .

[30]  James A. Sherwood,et al.  A friction model for thermostamping commingled glass–polypropylene woven fabrics , 2007 .

[31]  S. Sharma,et al.  A simplified finite element model for draping of woven material , 2004 .

[32]  Garrett B. McGuinness,et al.  Development of rheological models for forming flows and picture-frame shear testing of fabric reinforced thermoplastic sheets , 1997 .

[33]  Kevin D Potter,et al.  Beyond the pin-jointed net: maximising the deformability of aligned continuous fibre reinforcements , 2002 .

[34]  Anoush Poursartip,et al.  Experimental and numerical study of the effect of caul-sheets on corner thinning of composite laminates , 2002 .

[35]  Jun Wang,et al.  Experimental investigation of the draping properties of reinforcement fabrics , 1998 .

[36]  Andrew C. Long,et al.  Shear characterisation of viscous woven textile composites: a comparison between picture frame and bias extension experiments , 2004 .