Numerical simulation and performance investigation of an advanced adsorption desalination cycle

Abstract Low temperature waste heat-driven adsorption desalination (AD) cycles offer high potential as one of the most economically viable and environmental-friendly desalination methods. This article presents the development of an advanced adsorption desalination cycle that employs internal heat recovery between the evaporator and the condenser, utilizing an encapsulated evaporator–condenser unit for effective heat transfer. A simulation model has been developed based on the actual sorption characteristics of the adsorbent–adsorbate pair, energy and mass balances applied to the components of the AD cycle. With an integrated design, the temperature in the evaporator and the vapor pressurization of the adsorber are raised due to the direct heat recovery from the condenser, resulting in the higher water production rates, typically improved by as much as three folds of the conventional AD cycle. In addition, the integrated design eliminates two pumps, namely, the condenser cooling water and the chilled water pumps, lowering the overall electricity consumption. The performance of the cycle is analyzed at assorted heat source and cooling water temperatures, and different cycle times as well as the transient heat transfer coefficients of the evaporation and condensation.

[1]  Chi Tien,et al.  Adsorption calculations and modeling , 1994 .

[2]  Kyaw Thu,et al.  Study on an advanced adsorption desalination cycle with evaporator–condenser heat recovery circuit , 2011 .

[3]  John MacHarg,et al.  ADC baseline tests reveal trends in membrane performance , 2008 .

[4]  A. Chakraborty,et al.  New pool boiling data for water with copper-foam metal at sub-atmospheric pressures: Experiments and correlation , 2006 .

[5]  Kim Choon Ng,et al.  Experimental investigation of an adsorption desalination plant using low-temperature waste heat , 2005 .

[6]  Kim Choon Ng,et al.  Adsorption Desalination Quenches Global Thirst , 2008 .

[7]  Akili D. Khawaji,et al.  Advances in seawater desalination technologies , 2008 .

[8]  N. M. Al-Najem,et al.  Energy consumption by multi-stage flash and reverse osmosis desalters , 2000 .

[9]  K. S. Speigler,et al.  A Desalination Primer , 1994 .

[10]  Takao Kashiwagi,et al.  Experimental investigation of an advanced adsorption refrigeration cycle , 1997 .

[11]  Kyaw Thu,et al.  Operational strategy of adsorption desalination systems , 2009 .

[12]  Kyaw Thu,et al.  Life-cycle cost analysis of adsorption cycles for desalination , 2010 .

[13]  M. Al-Shammiri,et al.  Maximum recovery from seawater reverse osmosis plants in Kuwait , 1997 .

[14]  H. Ettouney,et al.  Fundamentals of Salt Water Desalination , 2002 .

[15]  M. Murakami.  Managing Water for Peace in the Middle East: Alternative Strategies , 1995 .

[16]  Kyaw Thu,et al.  Thermo-physical properties of silica gel for adsorption desalination cycle , 2013 .

[17]  James E. Miller,et al.  Review of Water Resources and Desalination Technologies , 2003 .

[18]  Mark W. Rosegrant,et al.  The world food situation: Recent developments, emerging issues, and long-term prospects , 1997 .

[19]  Kyaw Thu,et al.  Solar-assisted dual-effect adsorption cycle for the production of cooling effect and potable water , 2009 .

[20]  J. Wallace,et al.  Water resources and their use in food production systems , 2002, Aquatic Sciences.

[21]  K. Ng,et al.  Specific heat capacity of a single component adsorbent-adsorbate system , 2007 .

[22]  K. Ng,et al.  Experimental investigation of the silica gel–water adsorption isotherm characteristics , 2001 .

[23]  Kyaw Thu,et al.  Study on a waste heat-driven adsorption cooling cum desalination cycle , 2012 .