Hysteresis in cloud heights during solid suspension in stirred tank reactor: Experiments and CFD simulations

Solid suspension in stirred tank reactor is widely used in process industries for catalytic reactions, dissolution of solids, crystallization, and so on. Suspension quality is a key issue in design and operation of stirred reactor and its determination is not straight forward. Cloud height measurements of solid suspension provide a relatively simple way to quantify quality of suspension. In this work, experiments were carried out to quantify variation of cloud heights with impeller speed and particle characteristics. These measurements were carried out using visual observations, image analysis, and ultrasound velocity profiler techniques. The obtained data demonstrated the existence of hysteresis in cloud heights with respect to impeller speed. Apart from possible applications in reducing power required for achieving desired solid suspension quality, the existence of hysteresis also provides a new way to evaluate computational fluid dynamics (CFD) simulations of solid–liquid flows in stirred vessels. An attempt was made to capture observed hysteresis in cloud heights in CFD simulations. The simulated results were compared with the experimental data. The presented models and results (experimental and computational) will be useful for simulating complex solid–liquid flows in stirred reactors. © 2010 American Institute of Chemical Engineers AIChE J, 2010

[1]  E. H. Stitt,et al.  Explaining mass transfer observations in multiphase stirred reactors: particle-liquid slip velocity measurements using PEPT , 2003 .

[2]  Jürgen Stumper,et al.  Gas–liquid two-phase flow distributions in parallel channels for fuel cells , 2009 .

[3]  Alvin W. Nienow,et al.  Mixing Time for Different Diameters of Impeller at a High Solid Concentration in an Agitated Vessel , 2005 .

[4]  A. W. Etchells,et al.  Suspension and Liquid Homogenization in High Solids Concentration Stirred Chemical Reactors , 1999 .

[5]  Carlos F.M. Coimbra,et al.  Fundamental aspects of modeling turbulent particle dispersion in dilute flows , 1996 .

[6]  Michael T. Hicks,et al.  CLOUD HEIGHT IN SOLIDS SUSPENSION AGITATION , 1997 .

[7]  J. Bertrand,et al.  Eulerian simulation of dense solid-liquid suspension in multi-stage stirred vessel , 2001 .

[8]  L. Schiller.  Uber die Grundlegenden Berechnungen bei der Schwerkraftaufbereitung , 1933 .

[9]  A. Brucato,et al.  Particle drag coefficients in turbulent fluids , 1998 .

[10]  H. Yamazaki,et al.  Concentration profiles of solids suspended in a stirred tank , 1986 .

[11]  G. Montante *,et al.  Modelling of solids distribution in stirred tanks: analysis of simulation strategies and comparison with experimental data , 2005 .

[12]  Joël Bertrand,et al.  Local measurements of fluid and particle velocities in a stirred suspension , 1997 .

[13]  J. C. Godfrey,et al.  CFD Simulation of Particle Distribution in Stirred Vessels , 2000 .

[14]  Gopal R. Kasat,et al.  Computational Fluid Dynamics Simulation of the Solid Suspension in a Stirred Slurry Reactor , 2006 .

[15]  Jürgen Stumper,et al.  Gas–liquid two-phase flow patterns in parallel channels for fuel cells , 2008 .

[16]  M. Nocentini,et al.  Solid distribution in vessels stirred with multiple impellers , 1990 .

[17]  Mattias Ljungqvist,et al.  Numerical Simulation of the Two-Phase Flow in an Axially Stirred Vessel , 2001 .

[18]  A. D. Gosman,et al.  Multidimensional modeling of turbulent two‐phase flows in stirred vessels , 1992 .