Heat and mass transfer in multicylinder drying : Part I:Analysis of machine data

Abstract A mathematical model describing the heat and mass transfer in the dryer section of a paper machine has been applied to the production data from four paper machines. Model predictions for the machine speed are compared to actual machine speeds for a total of 163 data sets. The mathematical model assumes that the temperature and moisture content remain homogeneous in the thickness direction of the sheet. For three paper machines producing paper with basis weights ranging from 0.056 to 0.159 kg d.s./m 2 the model predictions are adequate. For the paper machine producing the heaviest grades with basis weights ranging from 0.189 to 0.390 kg d.s./m 2 the model predictions are flawed by a systematic error. For low machine velocities/high basis weights the machine velocity is over-predicted and for high machine velocities/low basis weights the machine velocity is under-predicted. This systematic error is caused by the assumption of homogeneous moisture content and temperature within the sheet being severely in error for thick sheets.