An In-Fiber Mach–Zehnder Interferometer Based on Arc-Induced Tapers for High Sensitivity Humidity Sensing

A new humidity sensor based on in-fiber Mach-Zehnder interferometer (MZI) is proposed and demonstrated. The interferometer consists of two arc-induced ellipsoid fiber tapers and a section of single mode fiber between them. In our humidity experiment, the relative humidity sensitivity of MZI is -0.047 nm%RH in the range of 50%-90%RH. Temperature response characteristics of this MZI are also studied, and the temperature sensitivity is 0.067 nm/°C from 27 °C to 120°C. The experimental results show that the sensor has a linear response to humidity and temperature with linear fitting of 0.993 and 0.992, respectively. The MZI presented in this paper has advantages of low cost, easy fabrication, and high sensitivity, which can be a potential detector for the relative humidity measurement.

[1]  Feng Fei,et al.  Temperature-insensitive Mach-Zehnder interferometric strain sensor based on concatenating two waist-enlarged fiber tapers , 2012 .

[2]  Yongqin Yu,et al.  High-Sensitivity Mach–Zehnder Interferometric Temperature Fiber Sensor Based on a Waist-Enlarged Fusion Bitaper , 2011, IEEE Sensors Journal.

[3]  H. Choi,et al.  All-fiber Mach-Zehnder type interferometers formed in photonic crystal fiber. , 2007, Optics express.

[4]  Y. Semenova,et al.  Relative Humidity Sensor Based on an Agarose-Infiltrated Photonic Crystal Fiber Interferometer , 2012, IEEE Journal of Selected Topics in Quantum Electronics.

[5]  Limin Tong,et al.  Fast detection of humidity with a subwavelength-diameter fiber taper coated with gelatin film. , 2008, Optics express.

[6]  J. L. Santos,et al.  Simultaneous Measurement of Humidity and Temperature Based on an SiO$_{2}$ -Nanospheres Film Deposited on a Long-Period Grating In-Line With a Fiber Bragg Grating , 2011, IEEE Sensors Journal.

[7]  Sumei Wang,et al.  A new Mach-Zehnder interferometer in a thinned-cladding fiber fabricated by electric arc for high sensitivity refractive index sensing , 2012 .

[8]  T. L. Yeo,et al.  Characterisation of a polymer-coated fibre Bragg grating sensor for relative humidity sensing , 2005 .

[9]  T. L. Yeo,et al.  LPG-Based PVA Coated Sensor for Relative Humidity Measurement , 2007, IEEE Sensors Journal.

[10]  Yuliya Semenova,et al.  A fiber bend based humidity sensor with a wide linear range and fast measurement speed , 2012 .

[11]  Yuliya Semenova,et al.  Humidity sensor based on a single-mode hetero-core fiber structure. , 2011, Optics letters.

[12]  F. Arregui,et al.  Design of Humidity Sensors Based on Tapered Optical Fibers , 2006, Journal of Lightwave Technology.

[13]  Sailing He,et al.  Optical fiber relative humidity sensor based on FBG incorporated thin-core fiber modal interferometer. , 2011, Optics express.

[14]  Min Zhang,et al.  Long-Period Grating Relative Humidity Sensor With Hydrogel Coating , 2007, IEEE Photonics Technology Letters.

[15]  Chi Chiu Chan,et al.  Miniature refractometer based on Mach–Zehnder interferometer with waist-enlarged fusion bitaper , 2013 .

[16]  Kefa Cen,et al.  Low-cost relative humidity sensor based on thermoplastic polyimide-coated fiber Bragg grating , 2007 .

[17]  D. Webb,et al.  Humidity insensitive TOPAS polymer fiber Bragg grating sensor. , 2011, Optics express.

[18]  Y. Semenova,et al.  Improving the sensitivity of a humidity sensor based on fiber bend coated with a hygroscopic coating , 2011 .

[19]  Min Zhang,et al.  Relative Humidity Sensor Based on Cascaded Long-Period Gratings With Hydrogel Coatings and Fourier Demodulation , 2009, IEEE Photonics Technology Letters.

[20]  Di Wu,et al.  Refractive index sensing based on Mach-Zehnder interferometer formed by three cascaded single-mode fiber tapers , 2011, International Conference on Optical Fibre Sensors.

[21]  Xiu Min Ang,et al.  Chitosan based fiber-optic Fabry–Perot humidity sensor , 2012 .

[22]  Xiaoyi Bao,et al.  Application of spectrum differential integration method in an in-line fiber Mach-Zehnder refractive index sensor. , 2010, Optics express.

[23]  Peng Zu,et al.  Humidity Sensor Based on a Multimode-Fiber Taper Coated With Polyvinyl Alcohol Interacting With a Fiber Bragg Grating , 2012, IEEE Sensors Journal.