Research on temperature dependent effective thermal conductivity of composite-phase change materials (PCMs) wall based on steady-state method in a thermal chamber

Abstract Effective thermal conductivity (λ) is the key factor in characterizing thermal conductance and temperature field when studying the thermal performance of composite-phase change materials (PCMs). But relevant research focusing on the influence of temperature on λ of composite-PCMs is scarcely reported. This paper aimed to examine the relationship between λ of a kind of prevalent composite-PCMs wall (λpcw) and temperature as well as the percentage of the phase-changed amount of the wall. In this research, two walls with a dimension of 1.5 m (W) × 1.5 m (H) and composed of cement mortar/shape-stabilized PCMs bricks, Portland vitrified bricks, respectively were built and tested by a steady-state method in a thermal chamber. Results showed a good positive linear relationship of λ with the increasing mean wall surface temperature for the regular vitrified brick wall as well as the composite-PCMs wall in solid and liquid states. In addition, as for the cases where the composite-PCMs wall partly experienced solid-liquid phase change, there was a negative proportional relationship between λ and the increasing percentage of the phase-changed part, which exhibited the major difference with that of the common walls.

[1]  Luisa F. Cabeza,et al.  Phase change materials and thermal energy storage for buildings , 2015 .

[2]  Paulo Santos,et al.  Review of passive PCM latent heat thermal energy storage systems towards buildings’ energy efficiency , 2013 .

[3]  M. G. Bulmer,et al.  Principles of Statistics. , 1969 .

[4]  Xin Wang,et al.  Influence of additives on thermal conductivity of shape-stabilized phase change material , 2006 .

[5]  J. Maxwell.  A Treatise on Electricity and Magnetism , 1873, Nature.

[6]  D. P. Sekulic,et al.  Extended surface heat transfer , 1972 .

[7]  R. Vachon,et al.  Thermal conductivity of heterogeneous mixtures , 1978 .

[8]  Frédéric Kuznik,et al.  A review on phase change materials integrated in building walls , 2011 .

[9]  L. Rayleigh,et al.  LVI. On the influence of obstacles arranged in rectangular order upon the properties of a medium , 1892 .

[10]  H. Inaba,et al.  Evaluation of thermophysical characteristics on shape-stabilized paraffin as a solid-liquid phase change material , 1997 .

[11]  C. Poon,et al.  Use of phase change materials for thermal energy storage in concrete: An overview , 2013 .

[12]  Dorel Feldman,et al.  Latent heat storage in building materials , 1993 .

[13]  Shazim Ali Memon,et al.  Phase change materials integrated in building walls: A state of the art review , 2014 .

[14]  John William Strutt,et al.  Scientific Papers: On the Influence of Obstacles arranged in Rectangular Order upon the Properties of a Medium , 2009 .

[15]  Sabine Caré,et al.  Experimental and multi-scale analysis of the thermal properties of Portland cement concretes embedded with microencapsulated Phase Change Materials (PCMs) , 2014 .

[16]  Refrigerating.  ASHRAE handbook of fundamentals , 1967 .

[17]  O. K. Crosser,et al.  Thermal Conductivity of Heterogeneous Two-Component Systems , 1962 .

[18]  Hong Ye,et al.  The performance evaluation of shape-stabilized phase change materials in building applications using energy saving index , 2014 .

[19]  Claude Cohen,et al.  Measurement of thermal conductivity of polymer melts by the line‐source method , 1990 .

[20]  Kiichi Tsuchiya,et al.  A Thermal-Expansion-Type Microactuator with Paraffin as the Expansive Material (Basic Performance of a Prototype Linear Actuator) , 1997 .

[21]  D. R. Holmes,et al.  Crystal lattice parameters and the thermal expansion of linear paraffin hydrocarbons, including polyethylenes , 1960 .

[22]  P. Lettieri,et al.  An introduction to heat transfer , 2007 .

[23]  D. Hasselman,et al.  Effective Thermal Conductivity of Composites with Interfacial Thermal Barrier Resistance , 1987 .

[24]  Bjørn Petter Jelle,et al.  Phase Change Materials and Products for Building Applications: A State-of-the-Art Review and Future Research Opportunities , 2015 .

[25]  W. Rohsenow,et al.  Handbook of Heat Transfer , 1998 .

[26]  Chao Chen,et al.  Effect of phase change materials on indoor thermal environment under different weather conditions and over a long time , 2015 .

[27]  Khamid Mahkamov,et al.  Passive thermal control in residential buildings using phase change materials , 2016 .