The effect of hemicellulose on the interparticle frictional behavior of lignocellulosic biomass particulates

[1]  T. Roessler,et al.  DEM parameter calibration of cohesive bulk materials using a simple angle of repose test , 2019, Particuology.

[2]  N. Abdoulmoumine,et al.  Hot water extraction as a pretreatment for reducing syngas inorganics impurities – A parametric investigation on switchgrass and loblolly pine bark , 2018 .

[3]  Omar S. Baghabra Al-Amoudi,et al.  A review on the angle of repose of granular materials , 2018 .

[4]  W. Günthner,et al.  Angle of repose revisited: When is a heap a cone? , 2017 .

[5]  Jie Yu,et al.  Cellulose, xylan and lignin interactions during pyrolysis of lignocellulosic biomass , 2017 .

[6]  Abhijit Dutta,et al.  Process Design and Economics for the Conversion of Lignocellulosic Biomass to Hydrocarbon Fuels: Thermochemical Research Pathways with In Situ and Ex Situ Upgrading of Fast Pyrolysis Vapors , 2015 .

[7]  A. Hansen,et al.  Flow performance of ground biomass in a commercial auger , 2014 .

[8]  F. Agblevor,et al.  Catalytic pyrolysis for the production of refinery-ready biocrude oils from six different biomass sources , 2014 .

[9]  A. Stipanovic,et al.  Electron beam pretreatment of switchgrass to enhance enzymatic hydrolysis to produce sugars for biofuels. , 2014, Carbohydrate polymers.

[10]  A. Stipanovic,et al.  A modulated-TGA approach to the kinetics of lignocellulosic biomass pyrolysis/combustion , 2012 .

[11]  J. Villaseñor,et al.  Thermogravimetric-mass spectrometric analysis of lignocellulosic and marine biomass pyrolysis. , 2012, Bioresource technology.

[12]  P. Radziszewski,et al.  Virtual soil calibration for wheel–soil interaction simulations using the discrete-element method , 2011 .

[13]  A. Ragauskas,et al.  Biomass characterization of morphological portions of alamo switchgrass. , 2011, Journal of agricultural and food chemistry.

[14]  A. Zabaniotou,et al.  Thermal degradation studies and kinetic modeling of cardoon (Cynara cardunculus) pyrolysis using thermogravimetric analysis (TGA). , 2011, Bioresource technology.

[15]  M. Ashok Kumar,et al.  Frictional Coefficient, Hardness, Impact Strength, and Chemical Resistance of Reinforced Sisal-Glass Fiber Epoxy Hybrid Composites , 2010 .

[16]  Ramkrishna Sen,et al.  Enhancement of tensile strength of lignocellulosic jute fibers by alkali-steam treatment. , 2010, Bioresource technology.

[17]  U. Kim,et al.  Thermal decomposition of native cellulose: Influence on crystallite size , 2010 .

[18]  A. Stipanovic,et al.  Electron beam irradiation of cellulose , 2009 .

[19]  Lee J Johnston,et al.  Selected additives did not improve flowability of DDGS in commercial systems , 2009 .

[20]  Panmanas Sirisomboon,et al.  Physical properties of Jatropha curcas L. kernels after heat treatments , 2009 .

[21]  D. Kamdem,et al.  Influence of wood extractives on moisture sorption and wettability of red oak (Quercus rubra), black cherry (Prunus serotina), and red pine (Pinus resinosa) , 2007 .

[22]  Engin Derya Gezer,et al.  Mechanical and chemical behavior of spruce wood modified by heat , 2006 .

[23]  M. Ike,et al.  Comparative study on chemical pretreatments to accelerate enzymatic hydrolysis of aquatic macrophyte biomass used in water purification processes. , 2006, Bioresource technology.

[24]  J. Santamarina,et al.  Closure of "Particle Shape Effects on Packing Density, Stiffness, and Strength: Natural and Crushed Sands" , 2006 .

[25]  James A. Dumesic,et al.  An overview of aqueous-phase catalytic processes for production of hydrogen and alkanes in a biorefinery , 2006 .

[26]  José C del Río,et al.  Biodegradation of lignocellulosics: microbial, chemical, and enzymatic aspects of the fungal attack of lignin. , 2005, International microbiology : the official journal of the Spanish Society for Microbiology.

[27]  Farzaneh Teymouri,et al.  Understanding factors that limit enzymatic hydrolysis of biomass , 2005, Applied biochemistry and biotechnology.

[28]  A. Ragauskas,et al.  Review of current and future softwood kraft lignin process chemistry , 2004 .

[29]  Jean-Pierre Vilotte,et al.  Spreading of a granular mass on a horizontal plane , 2004 .

[30]  Kerry Johanson,et al.  Rathole stability analysis for aerated powder materials , 2004 .

[31]  Kenneth J. Moore,et al.  Biomass yield and quality of 20 switchgrass populations in southern Iowa, USA. , 2002 .

[32]  C. Blasi,et al.  Thermogravimetric Analysis and Devolatilization Kinetics of Wood , 2002 .

[33]  Peter McKendry,et al.  Energy production from biomass (Part 1): Overview of biomass. , 2002, Bioresource technology.

[34]  J. Pérez,et al.  Biodegradation and biological treatments of cellulose, hemicellulose and lignin: an overview , 2002, International microbiology : the official journal of the Spanish Society for Microbiology.

[35]  P. Blau.  The significance and use of the friction coefficient , 2001 .

[36]  A. Yu,et al.  Rolling friction in the dynamic simulation of sandpile formation , 1999 .

[37]  J. A. Conesa,et al.  Pyrolysis kinetics of almond shells and olive stones considering their organic fractions , 1997 .

[38]  N. Bakhshi,et al.  Kinetic studies of corn stover saccharification using sulphuric acid , 1984, Biotechnology and bioengineering.

[39]  A. W. Jenike.  Steady Gravity Flow of Frictional-Cohesive Solids in Converging Channels , 1964 .

[40]  K. Terzaghi.  Theoretical Soil Mechanics , 1943 .

[41]  Stefan Pirker,et al.  Efficient implementation of superquadric particles in Discrete Element Method within an open-source framework , 2017, CPM 2017.

[42]  N. Labbe,et al.  Using a chelating agent to generate low ash bioenergy feedstock , 2017 .

[43]  T. Koddenberg.  Handbook of Wood Chemistry and Wood Composites , 2016 .

[44]  Dingena L. Schott,et al.  Micro–macro properties of quartz sand: Experimental investigation and DEM simulation , 2015 .

[45]  Pak Sui Lam,et al.  Effect of Particle Size and Shape on Physical Properties of Biomass Grinds , 2008 .

[46]  Richard M. Lueptow,et al.  Surface roughness effects in granular matter: influence on angle of repose and the absence of segregation. , 2006, Physical review. E, Statistical, nonlinear, and soft matter physics.

[47]  Graham J. Weir,et al.  A mathematical model for dilating, non-cohesive granular flows in steep-walled hoppers , 2004 .

[48]  L. Salmén,et al.  Cell wall properties and their effects on the mechanical properties of fibers , 2002 .

[49]  P. J. Blau,et al.  Experimental Aspects of Friction Research on the Macroscale , 2001 .

[50]  James Prescott,et al.  On powder flowability , 2000 .

[51]  Christopher W. Myers,et al.  Understanding cost growth and performance shortfalls in pioneer process plants , 1981 .

[52]  E. Sjöström,et al.  Wood Chemistry: Fundamentals and Applications , 1981 .

[53]  R. Whitman,et al.  Soil mechanics, SI version , 1969 .