Improving urea formaldehyde resin properties by glyoxalated soda bagasse lignin

[1]  Jizhi Zhang,et al.  Effects of Melamine Addition Stage on the Performance and Curing Behavior of Melamine-Urea-Formaldehyde (MUF) Resin , 2013 .

[2]  A. Pizzi,et al.  MALDI-TOF study of oligomers distribution in spray-dried glyoxalated lignin for wood adhesives , 2013 .

[3]  A. Pizzi,et al.  Low Formaldehyde Emitting Biobased Wood Adhesives Manufactured from Mixtures of Tannin and Glyoxylated Lignin , 2012 .

[4]  A. Pizzi,et al.  Study on Lignin–Glyoxal Reaction by MALDI-TOF and CP-MAS 13C-NMR , 2012 .

[5]  E. Gümüşkaya,et al.  Decreasing formaldehyde emission from medium density fiberboard panels produced by adding different amine compounds to urea formaldehyde resin , 2011 .

[6]  J. Genco,et al.  Lignin recovered from the near-neutral hemicellulose extraction process as a precursor for carbon fiber , 2011, BioResources.

[7]  F. Huang,et al.  Study of chemical modification of alkaline lignin by the glyoxalation reaction , 2011 .

[8]  Byung‐Dae Park,et al.  Hydrolytic stability and crystallinity of cured urea–formaldehyde resin adhesives with different formaldehyde/urea mole ratios , 2011 .

[9]  F. Huang,et al.  Characterization of alkaline lignins for use in phenol-formaldehyde and epoxy resins , 2011, BioResources.

[10]  Meng Zhang,et al.  Methods to improve lignin’s reactivity as a phenol substitute and as replacement for other phenolic compounds: A brief review , 2011, BioResources.

[11]  Qiaolong Yuan,et al.  Synthesis and characterization of kraft lignin-based epoxy resins , 2011, BioResources.

[12]  Francesc Ferrando,et al.  Kraft lignin behavior during reaction in an alkaline medium , 2011 .

[13]  A. Pizzi,et al.  Synthetic-resin-free wood panel adhesives from mixed low molecular mass lignin and tannin , 2011, European Journal of Wood and Wood Products.

[14]  J. Kadla,et al.  Effect of nanofillers as reinforcement agents for lignin composite fibers , 2010 .

[15]  Xian-su Cheng,et al.  Preparation and characterization of phenol-formaldehyde adhesives modified with enzymatic hydrolysis lignin. , 2010, Bioresource technology.

[16]  Jianzhang Li,et al.  On the structure and cure acceleration of phenol-urea-formaldehyde resins with different catalysts , 2009 .

[17]  C. Sensogut,et al.  The effect of borax pentahydrate addition to urea formaldehyde on the mechanical characteristics and free formaldehyde content of plywood , 2009 .

[18]  P. Steele,et al.  USE OF LIGNIN SEPARATED FROM BIO-OIL IN ORIENTED STRAND BOARD BINDER PHENOL-FORMALDEHYDE RESINS , 2009 .

[19]  Wang Chunpeng,et al.  Study on composite adhesive of hydroxymethylated lignosulfonate/phenol-formaldehyde resin with low free formaldehyde. , 2009 .

[20]  A. Bhattacharya,et al.  Polymer Grafting and Crosslinking , 2008 .

[21]  M. Mamiński,et al.  Hyperbranched Polyether as a Modifying Agent for Urea-Formaldehyde Resins—Hardness and Strength Control Tool , 2007 .

[22]  S. R. Patel,et al.  Novel Polyimide System Based on Nitro Displacement/Diels-Alder Reactions , 2007 .

[23]  Antonio Pizzi,et al.  Lignin-based wood panel adhesives without formaldehyde , 2007, Holz als Roh- und Werkstoff.

[24]  P. Heiden,et al.  Thermoplastic modification of urea–formaldehyde wood adhesives to improve moisture resistance , 2006 .

[25]  J. Salvadó,et al.  Structural characterization of technical lignins for the production of adhesives: Application to lignosulfonate, kraft, soda-anthraquinone, organosolv and ethanol process lignins , 2006 .

[26]  S. Shaler,et al.  Characterization of urea–formaldehyde resin penetration into medium density fiberboard fibers , 2005, Wood Science and Technology.

[27]  F. Rodríguez,et al.  Modification of ammonium lignosulfonate by phenolation for use in phenolic resins. , 2005, Bioresource technology.

[28]  Amit J. Patel,et al.  Synthesis, Characterization and Composites from Resorcinol-urea-formaldehyde-casein Resin , 2005 .

[29]  S. Ashraf,et al.  Development and characterization of a wood adhesive using bagasse lignin , 2004 .

[30]  S. Tohmura,et al.  Influence of the melamine content in melamine-urea-formaldehyde resins on formaldehyde emission and cured resin structure , 2001, Journal of Wood Science.

[31]  G. Han,et al.  Improvement mechanism of bondability in UF-bonded reed and wheat straw boards by silane coupling agent and extraction treatments , 1999, Journal of Wood Science.

[32]  Antonio Pizzi,et al.  Handbook of Adhesive Technology, Revised and Expanded , 2003 .

[33]  T. Kaljuvee,et al.  Thermal behaviour of urea-formaldehyde resins during curing , 2003 .

[34]  N. Özmen,et al.  Studies on Lignin-Based Adhesives for Particleboard Panels , 2003 .

[35]  N. Özmen,et al.  Use of organosolv lignin in phenol-formaldehyde resins for particleboard production. II. Particleboard production and properties , 2002 .

[36]  N. Özmen,et al.  Use of organosolv lignin in phenol–formaldehyde resins for particleboard production: I. Organosolv lignin modified resins , 2002 .

[37]  Qinglin Wu,et al.  Chemical Coupling in Wood Fiber and Polymer Composites: A Review of Coupling Agents and Treatments , 2000 .

[38]  Antonio Pizzi,et al.  Handbook of adhesive technology , 1994 .

[39]  E. Ferg,et al.  The Correlation of Strength and Formaldehyde Emission with the Crystalline/Amorphous Structure of UF Resins , 1992 .

[40]  F. A. Cameron,et al.  Soda Bagasse Lignin Adhesives for Particleboard: Preliminary Results , 1989 .

[41]  E. H. Andrews,et al.  Elastomeric Adhesives: Effect of Cross Link Density on Joint Strength , 1973 .