Processing and banding in AA2524 and AA2024 friction stir welding

Abstract An attempt has been made to clarify the relationship between the periodicity of process parameters and that of the micro-/mesostructural banding in friction stir welding (FSW). The oscillation of FSW parameters was measured and analysed during baseline experiments without welding and during a series of FSW of AA2524 and AA2024 aluminium alloys; the banded structures in all the welds were also characterised. It is found that independent of the tool runout, there are well defined periodic variations in the process forces, the translational resistance force F x) and Z axis force F z of the welding tool in all joints. The measured band spacing is closely correlated with the oscillation period of process forces F x and F z, exerted on and by the welding tool. The direct and consistent relationship observed between periodicity in variation of F x and F z and the metallurgical structure, e.g. grain size, particle distribution, band width and microhardness, indicate that the formation of banded structures in FSW joints is related to the periodic variation of welding parameters.

[1]  S. Park,et al.  Microstructural factors governing hardness in friction-stir welds of solid-solution-hardened Al alloys , 2001 .

[2]  Michael A. Sutton,et al.  A Study of Residual Stresses and Microstructure in 2024-T3 Aluminum Friction Stir Butt Welds , 2002 .

[3]  Anthony P. Reynolds,et al.  Processing-Property Correlation in Friction Stir Welds , 2000 .

[4]  Michael A. Sutton,et al.  Banded Microstructure in 2024-T351 and 2524-T351 Aluminum Friction Stir Welds: Part II. Mechanical Characterization , 2004 .

[5]  Michael A. Sutton,et al.  Banded Microstructure in AA2024-T351 and AA2524-T351 Aluminum Friction Stir Welds: Part I. Metallurgical Studies , 2004 .

[6]  A. Reynolds,et al.  Visualization of the material flow in AA2195 friction-stir welds using a marker insert technique , 2001 .

[7]  Michael A. Sutton,et al.  Mixed mode I/II fracture of 2024-T3 friction stir welds , 2003 .

[8]  Ying Li,et al.  Fundamental Issues and Industrial Applications of Friction-Stir Welding , 2000 .

[9]  Radovan Kovacevic,et al.  Wavelet transform analysis of acoustic emission in monitoring friction stir welding of 6061 aluminum , 2003 .

[10]  A. Kokabi,et al.  The influence of the ratio of “rotational speed/traverse speed” (ω/v) on mechanical properties of AZ31 friction stir welds , 2006 .

[11]  P. Prangnell,et al.  Effect of welding parameters on nugget zone microstructure and properties in high strength aluminium alloy friction stir welds , 2003 .

[12]  Hiroyuki Kokawa,et al.  Microstructural evolution of 6063 aluminum during friction-stir welding , 1999 .

[13]  A. Reynolds,et al.  Parametric studies of friction stir welding by commercial fluid dynamics simulation , 2006 .

[14]  M. Sutton,et al.  Notch tensile response of mini-regions in AA2024 and AA2524 friction stir welds , 2006 .

[15]  Hidetoshi Fujii,et al.  Effect of tool shape on mechanical properties and microstructure of friction stir welded aluminum alloys , 2006 .

[16]  M. Sutton,et al.  Microstructure and Mixed Mode I/II Fracture of AA2524-T351 Base Material and Friction Stir Welds , 2006 .

[17]  Erol Arcaklioğlu,et al.  Artificial neural network application to the friction stir welding of aluminum plates , 2007 .

[18]  W. M. Thomas,et al.  Friction stir process welds aluminium alloys : The process produces low-distortion, high-quality, low-cost welds on aluminium , 1996 .

[19]  A. Reynolds,et al.  Relationships between weld parameters, hardness distribution and temperature history in alloy 7050 friction stir welds , 2005 .

[20]  K. N. Krishnan,et al.  On the formation of onion rings in friction stir welds , 2002 .