The shape of a step structure as a design aspect to control droplet generation in microfluidics

In this paper, silicon-based devices with a step structure integrated at the flow-focusing junction were designed, fabricated and characterized for droplet generation. A two-step silicon etching method was demonstrated to create the step structure. During fabrication, undesirable spikes encountered at the step edge were removed by oxygen plasma ashing and silicon isotropic etching. With this method, two types of step profile (flat and triangular profiles) were fabricated. These two profiles were compared for their differences in droplet-generation behavior. The device with the flat-step profile was found to make larger droplets and at a lower frequency compared to the device with the triangular-step profile. Additionally, polydimethylsiloxane and glass were tested as capping materials for the devices and the impact of their surface characteristics (hydrophobic and hydrophilic) on the type of droplets (water-in-oil or oil-in-water) formed was investigated.

[1]  G. Whitesides,et al.  Emulsification in a microfluidic flow-focusing device: effect of the viscosities of the liquids , 2008 .

[2]  Levent Yobas,et al.  High-performance flow-focusing geometry for spontaneous generation of monodispersed droplets. , 2006, Lab on a chip.

[3]  Daeyeon Lee,et al.  Photoreactive coating for high-contrast spatial patterning of microfluidic device wettability. , 2008, Lab on a chip.

[4]  R. Mezzenga,et al.  Understanding foods as soft materials , 2005, Nature materials.

[5]  G. Luo,et al.  Controllable preparation of monodisperse O/W and W/O emulsions in the same microfluidic device. , 2006, Langmuir : the ACS journal of surfaces and colloids.

[6]  Minseok Seo,et al.  Microfluidic consecutive flow-focusing droplet generators. , 2007, Soft matter.

[7]  Minseok Seo,et al.  Polymer particles with various shapes and morphologies produced in continuous microfluidic reactors. , 2005, Journal of the American Chemical Society.

[8]  S. Quake,et al.  Dynamic pattern formation in a vesicle-generating microfluidic device. , 2001, Physical review letters.

[9]  Nam-Trung Nguyen,et al.  Experimental and computational analysis of droplet formation in a high-performance flow-focusing geometry , 2007 .

[10]  D. Weitz,et al.  Monodisperse Double Emulsions Generated from a Microcapillary Device , 2005, Science.

[11]  Vittorio Cristini,et al.  Monodispersed microfluidic droplet generation by shear focusing microfluidic device , 2006 .

[12]  H. Stone,et al.  Formation of dispersions using “flow focusing” in microchannels , 2003 .

[13]  T. Tadros.  Industrial applications of dispersions , 1993 .

[14]  M. Márquez,et al.  Monodisperse structured multi-vesicle microencapsulation using flow-focusing and controlled disturbance , 2005, Journal of microencapsulation.

[15]  Ernesto Occhiello,et al.  On the aging of oxygen plasma-treated polydimethylsiloxane surfaces , 1990 .

[16]  Helen Song,et al.  Formation of droplets and mixing in multiphase microfluidics at low values of the Reynolds and the capillary numbers , 2003 .

[17]  M. Antonietti,et al.  90 Years of Polymer Latexes and Heterophase Polymerization: More vital than ever , 2003 .

[18]  Stephan Herminghaus,et al.  Generation of monodisperse gel emulsions in a microfluidic device , 2006 .

[19]  A Paul Alivisatos,et al.  High-temperature microfluidic synthesis of CdSe nanocrystals in nanoliter droplets. , 2005, Journal of the American Chemical Society.