Single point incremental forming: state-of-the-art and prospects

[1]  Timothy G. Gutowski,et al.  The energy requirements and environmental impacts of sheet metal forming: An analysis of five forming processes , 2017 .

[2]  Jorge Ferreira,et al.  Enhancing time efficiency on single point incremental forming processes , 2016 .

[3]  Laurent Duchene,et al.  Modeling the ductile fracture and the plastic anisotropy of DC01 steel at room temperature and low strain rates , 2016 .

[4]  Ankush Bansal,et al.  Analytical prediction of formed geometry in multi-stage single point incremental forming , 2016 .

[5]  Laurent Duchene,et al.  Single point incremental forming simulation with adaptive remeshing technique using solid-shell elements , 2016 .

[6]  Guzmán Inostroza,et al.  Experimental and Numerical Characterization of Damage and Application to Incremental Forming , 2016 .

[7]  Paul A. Meehan,et al.  Deformation mechanics and efficient force prediction in single point incremental forming , 2015 .

[8]  Jack Jeswiet,et al.  Design rules and applications of single-point incremental forming , 2015 .

[9]  João Paulo Davim,et al.  Lubrication aspects during Single Point Incremental Forming for steel and aluminum materials , 2015 .

[10]  Dongkai Xu,et al.  Cranial Reconstruction Using Double Side Incremental Forming , 2015 .

[11]  J. Duflou,et al.  An investigation into thickness distribution in single point incremental forming using sequential limit analysis , 2014 .

[12]  Jian Cao,et al.  Mechanism investigation of friction-related effects in single point incremental forming using a developed oblique roller-ball tool , 2014 .

[13]  Martin Trautz,et al.  Analysis into Differences between the Buckling in Single-Point and Two-Point Incremental Sheet Forming of Components for Self-Supporting Sheet Metal Structures , 2014 .

[14]  Joost Duflou,et al.  High-Speed Single Point Incremental Forming of an Automotive Aluminium Alloy , 2014 .

[15]  Jeong Whan Yoon,et al.  Suppression of necking in incremental sheet forming , 2014 .

[16]  Imre Paniti,et al.  A novel, single-robot based two sided incremental sheet forming system , 2014, ISR 2014.

[17]  R. Bahloul,et al.  A study on optimal design of process parameters in single point incremental forming of sheet metal by combining Box–Behnken design of experiments, response surface methods and genetic algorithms , 2014 .

[18]  Bert Lauwers,et al.  Tool path generation framework for accurate manufacture of complex 3D sheet metal parts using single point incremental forming , 2014, Comput. Ind..

[19]  Jack Jeswiet,et al.  Single-point incremental forming of 6061-T6 using electrically assisted forming methods , 2014 .

[20]  Mohammed Nouari,et al.  Simplified numerical approach for incremental sheet metal forming process , 2014 .

[21]  R. J. Alves de Sousa,et al.  SPIF-A: on the development of a new concept of incremental forming machine , 2014 .

[22]  Paul A. Meehan,et al.  Multi-pass deformation design for incremental sheet forming: Analytical modeling, finite element analysis and experimental validation , 2014 .

[23]  Paul A. Meehan,et al.  Efficient force prediction for incremental sheet forming and experimental validation , 2014 .

[24]  Jeong Whan Yoon,et al.  Benchmark 3 - Incremental sheet forming , 2013 .

[25]  Markus Bambach,et al.  Fast simulation of asymmetric incremental sheet metal forming , 2013 .

[26]  Markus Bambach,et al.  Analysis of optimal metal flow in incremental sheet forming , 2013 .

[27]  Jian Cao,et al.  Analysis and Observations of Current Density Sensitivity and Thermally Activated Mechanical Behavior in Electrically-Assisted Deformation , 2013 .

[28]  Fabrice Morestin,et al.  Characterization of flow stress for commercially pure titanium subjected to electrically assisted deformation , 2013 .

[29]  Anirban Bhattacharya,et al.  Experimental Study of Failure Modes and Scaling Effects in Micro-Incremental Forming , 2013 .

[30]  Eric Courteille,et al.  Off-line compensation of the tool path deviations on robotic machining: Application to incremental sheet forming , 2013 .

[31]  Georg Bergweiler,et al.  A novel approach for temperature control in ISF supported by laser and resistance heating , 2013 .

[32]  Bin Lu,et al.  Feature-based tool path generation approach for incremental sheet forming process , 2013 .

[33]  Jian Cao,et al.  Deformation mechanics in single-point and accumulative double-sided incremental forming , 2013 .

[34]  Bert Lauwers,et al.  Tool path generation for single point incremental forming using intelligent sequencing and multi-step mesh morphing techniques , 2013 .

[35]  Paulo A.F. Martins,et al.  A new approach for deformation history of material elements in hole-flanging produced by single point incremental forming , 2013 .

[36]  Jie Zhang,et al.  Comparison between an Advanced Numerical Simulation of Sheet Incremental Forming Using Adaptive Remeshing and Experimental Results , 2013 .

[37]  Joost Duflou,et al.  Manufacture of Accurate Titanium Cranio-Facial Implants with High Forming Angle Using Single Point Incremental Forming , 2013 .

[38]  Joost Duflou,et al.  Numerical Simulation of a Pyramid Steel Sheet Formed by Single Point Incremental Forming Using Solid-Shell Finite Elements , 2013 .

[39]  Bert Lauwers,et al.  Tool path compensation strategies for single point incremental sheet forming using multivariate adaptive regression splines , 2013, Comput. Aided Des..

[40]  Hui Wang,et al.  Electric hot incremental forming of low carbon steel sheet: accuracy improvement , 2013, The International Journal of Advanced Manufacturing Technology.

[41]  Junchao Li,et al.  Thickness distribution and design of a multi-stage process for sheet metal incremental forming , 2012 .

[42]  Jian Cao,et al.  Analytical prediction of stepped feature generation in multi-pass single point incremental forming , 2012 .

[43]  Joost Duflou,et al.  Sheet-metal based molds for low-pressure processing of thermoplastics , 2012 .

[44]  Gianfranco Palumbo,et al.  Experimental investigations on the single point incremental forming of a titanium alloy component combining static heating with high tool rotation speed , 2012 .

[45]  Ted Belytschko,et al.  Mechanics of fracture in single point incremental forming , 2012 .

[46]  Joost Duflou,et al.  Development of material- and energy-efficient metal sheet based tools for composite manufacturing , 2012 .

[47]  Bijan Mollaei Dariani,et al.  Analysis of incremental sheet metal forming using the upper-bound approach , 2012 .

[48]  Nadhir Lebaal,et al.  Tool path optimization for single point incremental sheet forming using response surface method , 2012, Simul. Model. Pract. Theory.

[49]  Wei-Xin Ren,et al.  Experimental Investigations on Forming Time in Negative Incremental Sheet Metal Forming Process , 2012 .

[50]  Ibai Ulacia,et al.  Warm Incremental Forming of Magnesium Alloys Using Hot Fluid as Heating Media , 2012 .

[51]  Francesco Gagliardi,et al.  Formability of lightweight alloys by hot incremental sheet forming , 2012 .

[52]  Jian Cao,et al.  Formability and Surface Finish Studies in Single Point Incremental Forming , 2011 .

[53]  Joost Duflou,et al.  Experimental and numerical study of an AlMgSc sheet formed by an incremental process , 2011 .

[54]  Niels Bay,et al.  Failure mechanisms in single-point incremental forming of metals , 2011 .

[55]  C. Henrard,et al.  Forming forces in single point incremental forming: prediction by finite element simulations, validation and sensitivity , 2011 .

[56]  Francisco S. Melo,et al.  Finding the Best Machine for SPIF Operations - a Brief Discussion , 2011 .

[57]  Joost Duflou,et al.  Multivariate Adaptive Regression Splines as a Tool to Improve the Accuracy of Parts Produced by FSPIF , 2011 .

[58]  Georg Bergweiler,et al.  Laser-assisted asymmetric incremental sheet forming of titanium sheet metal parts , 2011, Prod. Eng..

[59]  Mohammed Nouari,et al.  Numerical Simulation of Incremental Sheet Forming by Simplified Approach , 2011 .

[60]  Ted Belytschko,et al.  Fast methods for determining instabilities of elastic–plastic damage models through closed‐form expressions , 2010 .

[61]  Jian Cao,et al.  Automatic 3D Spiral Toolpath Generation for Single Point Incremental Forming , 2010 .

[62]  John T. Roth,et al.  Formability of Al 5xxx Sheet Metals Using Pulsed Current for Various Heat Treatments , 2010 .

[63]  Markus Bambach,et al.  A geometrical model of the kinematics of incremental sheet forming for the prediction of membrane strains and sheet thickness , 2010 .

[64]  Guoquan Tong,et al.  Electric hot incremental forming of Ti-6Al-4V titanium sheet , 2010 .

[65]  Ghulam Hussain,et al.  The performance of flat end and hemispherical end tools in single-point incremental forming , 2010 .

[66]  Joost R. Duflou,et al.  Force prediction for single point incremental forming deduced from experimental and FEM observations , 2010 .

[67]  Changsheng Li,et al.  Warm negative incremental forming of magnesium alloy AZ31 Sheet: New lubricating method , 2010 .

[68]  Paulo A.F. Martins,et al.  Strategies and limits in multi-stage single-point incremental forming , 2010 .

[69]  Matthieu Rauch,et al.  Tool path programming optimization for incremental sheet forming applications , 2009, Comput. Aided Des..

[70]  Philip Eyckens,et al.  Marciniak–Kuczynski type modelling of the effect of Through-Thickness Shear on the forming limits of sheet metal , 2009 .

[71]  Stephen R. Duncan,et al.  Rigid plastic model of incremental sheet deformation using second‐order cone programming , 2009 .

[72]  Paulo A.F. Martins,et al.  Revisiting single-point incremental forming and formability/failure diagrams by means of finite elements and experimentation , 2009 .

[73]  G. Hussain,et al.  A new formability indicator in single point incremental forming , 2009 .

[74]  A. H. van den Boogaard,et al.  Substructuring in the implicit simulation of single point incremental sheet forming , 2009 .

[75]  Joost Duflou,et al.  Obtainable Accuracies and Compensation Strategies for Robot Supported SPIF , 2009 .

[76]  Markus Bambach,et al.  Strategies to improve the geometric accuracy in asymmetric single point incremental forming , 2009, Prod. Eng..

[77]  Julian M. Allwood,et al.  The mechanics of incremental sheet forming , 2009 .

[78]  Jack Jeswiet,et al.  Single point incremental forming , 2008 .

[79]  J. J. Park,et al.  Incremental forming of free surface with magnesium alloy AZ31 sheet at warm temperatures , 2008 .

[80]  Ghulam Hussain,et al.  Electric hot incremental forming: A novel technique , 2008 .

[81]  Joost Duflou,et al.  Adaptive remeshing for incremental forming simulation , 2008 .

[82]  Nasir Hayat,et al.  Tool and lubrication for negative incremental forming of a commercially pure titanium sheet , 2008 .

[83]  Jong Jin Park,et al.  Formability of magnesium AZ31 sheet in the incremental forming at warm temperature , 2008 .

[84]  Joost R. Duflou,et al.  Improved SPIF performance through dynamic local heating , 2008 .

[85]  Bert Lauwers,et al.  Multi-Step toolpath approach to overcome forming limitations in single point incremental forming , 2008 .

[86]  Niels Bay,et al.  Multi Stage Strategies for Single Point Incremental Forming of a Cup , 2008 .

[87]  Joost Duflou,et al.  Identification of material parameters to predict Single Point Incremental Forming forces , 2008 .

[88]  Joost Duflou,et al.  Small-scale Finite Element Modelling of the Plastic Deformation Zone in the Incremental Forming Process , 2008 .

[89]  A. H. van den Boogaard,et al.  Time reduction in implicit single point incremental sheet forming simulation by refinement - derefinement , 2008 .

[90]  Niels Bay,et al.  Single‐point incremental forming and formability—failure diagrams , 2008 .

[91]  N. Hayat,et al.  The effect of variation in the curvature of part on the formability in incremental forming: An experimental investigation , 2007 .

[92]  Sang-Woo Kim,et al.  Incremental forming of Mg alloy sheet at elevated temperatures , 2007 .

[93]  L. Xue.  Damage accumulation and fracture initiation in uncracked ductile solids subject to triaxial loading , 2007 .

[94]  Giuseppina Ambrogio,et al.  An analytical model for improving precision in single point incremental forming , 2007 .

[95]  Bert Lauwers,et al.  Feature Based Approach for Increasing the Accuracy of the SPIF Process , 2007 .

[96]  A. Erman Tekkaya,et al.  The Increased Forming Limits of Incremental Sheet Forming Processes , 2007 .

[97]  Alexander Brosius,et al.  Decoupled Simulation Method For Incremental Sheet Metal Forming , 2007 .

[98]  Joost Duflou,et al.  Forming Limit Predictions for the Serrated Strain Paths in Single Point Incremental Sheet Forming , 2007 .

[99]  Jun Gu,et al.  Development of an inverse method for identification of materials parameters in the single point incremental sheet forming process , 2007 .

[100]  Joost Duflou,et al.  Model Identification and FE Simulations Effect of Different Yield Loci and Hardening Laws in Sheet Forming , 2007 .

[101]  John T. Roth,et al.  Metallic Forging Using Electrical Flow as an Alternative to Warm/Hot Working , 2007 .

[102]  Luigino Filice,et al.  A phenomenology-based approach for modelling material thinning and formability in incremental forming of cylindrical parts , 2006 .

[103]  Bert Lauwers,et al.  Medical application of single point incremental forming: cranial plate manufacturing , 2005 .

[104]  M. Muzzupappa,et al.  Application of Incremental Forming process for high customised medical product manufacturing , 2005 .

[105]  J. Jeswiet,et al.  Asymmetric Incremental Sheet Forming , 2005 .

[106]  Joost Duflou,et al.  Custom Manufacture of a Solar Cooker – A Case Study , 2005 .

[107]  J Jeswiet,et al.  Forming limit diagrams for single-point incremental forming of aluminium sheet , 2005 .

[108]  Julian M. Allwood,et al.  A structured search for applications of the incremental sheet-forming process by product segmentation , 2005 .

[109]  J Jeswiet,et al.  Wall thickness variations in single-point incremental forming , 2004 .

[110]  W. B. Lievers,et al.  Using incremental forming to calibrate a void nucleation model for automotive aluminum sheet alloys , 2004 .

[111]  P McAllister,et al.  Medical device regulation for manufacturers , 2003, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[112]  Jack Jeswiet,et al.  A review of conventional and modern single-point sheet metal forming methods , 2003 .

[113]  E Hagan,et al.  Forming parameters for incremental forming of aluminium alloy sheet metal , 2002 .

[114]  E. Collings,et al.  Materials Properties Handbook: Titanium Alloys , 1994 .

[115]  P. Thomason,et al.  Ductile Fracture of Metals , 1990 .

[116]  M. Donachie.  Titanium: A Technical Guide , 1988 .

[117]  R. Hill.  A theory of the yielding and plastic flow of anisotropic metals , 1948, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[118]  Joost Duflou,et al.  Production of thin Shell Clavicle Implants through Single Point Incremental Forming , 2017 .

[119]  Joost Duflou,et al.  Influence of Global Forced-air Warming on the Bulge Formation in Shallow Sloped SPIF Parts , 2017 .

[120]  G. Centeno,et al.  Recent Approaches for the Manufacturing of Polymeric Cranial Prostheses by Incremental Sheet Forming , 2017 .

[121]  Luigi De Napoli,et al.  Performances Analysis of Titanium Prostheses Manufactured by Superplastic Forming and Incremental Forming , 2017 .

[122]  Joost Duflou,et al.  Effect of laser transformation hardening on the accuracy of SPIF formed parts , 2017 .

[123]  Joost Duflou,et al.  Simulation of a two-slope pyramid made by SPIF using an adaptive remeshing method with solid-shell finite element , 2016 .

[124]  Joost Duflou,et al.  Towards accuracy improvement in single point incremental forming of shallow parts formed under laser assisted conditions , 2016 .

[125]  Jochen Stollenwerk,et al.  The Development of Incremental Sheet Forming from Flexible Forming to Fully Integrated Production of Sheet Metal Parts , 2015 .

[126]  Maria Luisa Garcia-Romeu,et al.  Manufacturing of Polymeric Biocompatible Cranial Geometry by Single Point Incremental Forming , 2015 .

[127]  Dongkai Xu,et al.  An efficient method for thickness prediction in multi-pass incremental sheet forming , 2015 .

[128]  Srinivasa Prakash Regalla,et al.  Effect of mesh parameters in finite element simulation of single point incremental sheet forming process , 2014 .

[129]  Keyur P. Desai,et al.  Die-less Rapid Prototyping Process: Parametric Investigations☆ , 2014 .

[130]  Francesco Gagliardi,et al.  Robust Design of Incremental Sheet forming by Taguchi's Method☆ , 2013 .

[131]  Javier León,et al.  Analysis of the Influence of Geometrical Parameters on the Mechanical Properties of Incremental Sheet Forming Parts , 2013 .

[132]  Giuseppina Ambrogio,et al.  On the high-speed Single Point Incremental Forming of titanium alloys , 2013 .

[133]  Brad L. Kinsey,et al.  Investigation of electroplastic effect at high deformation rates for 304SS and Ti–6Al–4V , 2013 .

[134]  Rajiv Malhotra,et al.  Fundamentals of Process Mechanics and Process Innovation in Incremental Forming , 2012 .

[135]  Jun Gu,et al.  Strain evolution in the single point incremental forming process: digital image correlation measurement and finite element prediction , 2011 .

[136]  Jian Cao,et al.  A new methodology for multi-pass single point incremental forming with mixed toolpaths , 2011 .

[137]  Jack Jeswiet,et al.  Single point incremental forming at high feed rates and rotational speeds: Surface and structural consequences , 2010 .

[138]  A. Ghiotti,et al.  A novel experimental set-up for warm incremental forming of AZ31B magnesium alloy sheets , 2010 .

[139]  Joost Duflou,et al.  Twist revisited: Twist phenomena in single point incremental forming , 2010 .

[140]  W. C. Emmensa,et al.  The technology of Incremental Sheet Forming – A brief review of the history , 2010 .

[141]  Julian M. Allwood,et al.  Closed-loop feedback control of product properties in flexible metal forming processes with mobile tools , 2009 .

[142]  Toshiyuki Obikawa,et al.  Single Point Micro Incremental Forming of Miniature Shell Structures , 2009 .

[143]  Horst Meier,et al.  Increasing the part accuracy in dieless robot-based incremental sheet metal forming , 2009 .

[144]  W. C. Emmensa,et al.  An overview of stabilizing deformation mechanisms in incremental sheet forming , 2008 .

[145]  Joost R. Duflou,et al.  Process window enhancement for single point incremental forming through multi-step toolpaths , 2008 .

[146]  Paulo A.F. Martins,et al.  Revisiting the fundamentals of single point incremental forming by means of membrane analysis , 2008 .

[147]  Niels Bay,et al.  Theory of single point incremental forming , 2008 .

[148]  Luigino Filice,et al.  Warm incremental forming of magnesium alloy AZ31 , 2008 .

[149]  Johan Verbert,et al.  Laser Assisted Incremental Forming: Formability and Accuracy Improvement , 2007 .

[150]  Jack Jeswiet,et al.  Forming Limit Curves in Single Point Incremental Forming , 2007 .

[151]  Joost Duflou,et al.  Asymmetric single point incremental forming of sheet metal , 2005 .

[152]  Markus Bambach,et al.  Forming strategies and Process Modelling for CNC Incremental Sheet Forming , 2004 .

[153]  Fabrizio Micari,et al.  Analysis of Material Formability in Incremental Forming , 2002 .

[154]  J. Lemaitre,et al.  Mécanique des matériaux solides , 1996 .

[155]  A. Needleman,et al.  Analysis of the cup-cone fracture in a round tensile bar , 1984 .