Poly(CL/DLLA-b-CL) multiblock copolymers as biodegradable thermoplastic elastomers

Lactic acid and e-caprolactone based polymers and their derivates are widely used in biomedical applications. Different properties are introduced by modifying the composition. In this study, poly(e-caprolactone/D,L-lactide)-b-poly(ecaprolactone) multiblock copolymers were synthesized as poly(ester-urethane)s (PEUs) by polymerizing in two steps involving ring-opening polymerization of precursors and by diisocyanate linking of precursors to produce thermoplastic elastomers (TPEs). The precursors and products were characterized by SEC, 1H-NMR and DSC, and dynamic mechanical study (by dynamic mechanical analysis, DMA) as well as morphological characterization (by transmission electron microscopy, TEM) of the product TPEs was carried out. Tensile and creep recovery properties of them were also studied. According to the characterizations, all the polymerizations were successful, and the prepared TPEs showed clear elastic behavior. In the DMA scans, rubbery plateau in the storage modulus curves between Tg and terminal flow region was clearly detectable indicating elasticity. The TEM images demonstrated phase separation of amorphous and crystalline blocks when the degree of crystallinity of the hard blocks was high enough. The elongations of TPEs varied between 800–1800%, while the modulus was 7–66 MPa. Two different types of recovery tests indicated the creep properties of TPEs to be highly dependent on the degree of crystallinity.

[1]  Jamie M. Messman,et al.  Synthesis and characterization of A–B–A triblock copolymers derived from chloro-telechelic poly(l-lactide): combining ring-opening polymerization (ROP) and atom transfer radical polymerization (ATRP) , 2005 .

[2]  D. Cohn,et al.  Designing biodegradable multiblock PCL/PLA thermoplastic elastomers. , 2005, Biomaterials.

[3]  D. Cohn,et al.  Biodegradable multiblock PEO/PLA thermoplastic elastomers: molecular design and properties , 2005 .

[4]  A. Janke,et al.  Multiblock copolymers of L-lactide and trimethylene carbonate. , 2005, Biomacromolecules.

[5]  Suming Li,et al.  Synthesis and degradation of PLA–PCL–PLA triblock copolymer prepared by successive polymerization of ε-caprolactone and dl-lactide , 2004 .

[6]  C. Teng,et al.  Synthesis and characterization of poly(L‐lactic acid)–poly(ε‐caprolactone) multiblock copolymers by melt polycondensation , 2004 .

[7]  J. Feijen,et al.  Triblock Copolymers Based on 1,3‐Trimethylene Carbonate and Lactide as Biodegradable Thermoplastic Elastomers , 2003 .

[8]  Young Ha Kim,et al.  Synthesis and Characterization of Poly(l-lactide)−Poly(ε-caprolactone) Multiblock Copolymers , 2003 .

[9]  V. Tupureina,et al.  Synthesis, structure, and properties of poly(ester urethanes) based on glycerol monostearate , 2003 .

[10]  Jukka Seppälä,et al.  Cross-linked poly(ε-caprolactone/D, L-lactide) copolymers with elastic properties , 2002 .

[11]  M. Hillmyer,et al.  Synthesis and characterization of polylactide‐block‐polyisoprene‐block‐polylactide triblock copolymers: new thermoplastic elastomers containing biodegradable segments , 2000 .

[12]  Sun Young Lee,et al.  Synthesis and Properties of Triblock Copolymers from L-Lactide and Trimethylene Carbonate , 2000 .

[13]  J. Seppälä,et al.  Effect of Structure Modification on Rheological Properties of Biodegradable Poly(ester-urethane) , 2000 .

[14]  Joseph Kost,et al.  Handbook of Biodegradable Polymers , 1998 .

[15]  G. Brown,et al.  New method for the characterization of domain morphology of polymer blends using ruthenium tetroxide staining and low voltage scanning electron microscopy (LVSEM) , 1997 .

[16]  J. Seppälä,et al.  Synthesis and Characterization of a Biodegradable Thermoplastic Poly(ester−urethane) Elastomer , 1997 .

[17]  J. Seppälä,et al.  Lactic acid based poly(ester-urethane)s : The effects of different polymerization conditions on the polymer structure and properties , 1997 .

[18]  J. Seppälä,et al.  The modification of lactic acid based poly(ester-urethane) by copolymerization , 1997 .

[19]  J. Seppälä,et al.  Lactic acid based poly(ester-urethanes) : Use of hydroxyl terminated prepolymer in urethane synthesis , 1997 .

[20]  T. Karjalainen,et al.  Biodegradable lactone copolymers. I: Characterization and mechanical behavior of ε-caprolactone and lactide copolymers , 1996 .

[21]  J. Seppälä,et al.  Properties and Polymerization of Biodegradable Thermoplastic Poly(Ester-urethane) , 1995 .

[22]  G. Fredrickson,et al.  Block copolymer thermodynamics: theory and experiment. , 1990, Annual review of physical chemistry.