A simple x‐ray monochromator based on an alligator lens

Alligator lenses, i.e. two inclined arrays of sawteeth or prisms, which face each other, can focus x-rays with photon energies >4 keV. The inclination angle can be changed easily, and thus either the focal length for fixed photon energy or the photon energy in a fixed slit position can be varied. The material distribution in this condition is approximately parabolic along the teeth axis, hence it is of the shape required for aberration-free focusing at a given photon energy. As the refractive index varies significantly with photon energy in the x-ray range, these lenses suffer from chromatic aberrations, if illuminated with white x-rays. In combination with a slit such a lens can therefore be used as an easily insertable inline monochromator. In this work, a simple universal function for the dependence of the transmission on the photon energy was derived for this application. The required tolerances for the shape of the sawteeth are found to be compatible with standard workshop machining procedures. A laboratory-made lens of Plexiglas is shown to increase the flux density in a laboratory setup by a factor of 3, i.e. 50% of the expected result for a perfect lens. The discrepancy can be consistently ascribed to macroscopic defects of the sawteeth tips. Expectations for the performance of these lenses as monochromators at synchrotron radiation sources are presented. A single Be alligator lens is expected to provide tuning between at least 8 keV and 20 keV photon energy with a bandpass of 6%, sufficient for XRF and SAXS experiments. Consequently, such a lens pair is all that is needed for building simple synchrotron radiation beamlines for special x-ray experiments. Copyright © 2004 John Wiley & Sons, Ltd.