Numerical Study on the Heat Generation and Thermal Control of Lithium-Ion Battery

[1]  M. Fowler,et al.  Combined influence of concentration-dependent properties, local deformation and boundary confinement on the migration of Li-ions in low-expansion electrode particle during lithiation , 2022, Journal of Energy Storage.

[2]  Münür Sacit Herdem,et al.  Numerical Simulation of Cooling Plate Using K-Epsilon Turbulence Model to Cool down Large-Sized Graphite/LiFePO4 Battery at High C-Rates , 2022, World Electric Vehicle Journal.

[3]  M. Fowler,et al.  A novel heat dissipation structure based on flat heat pipe for battery thermal management system , 2022, International Journal of Energy Research.

[4]  M. Canova,et al.  A Comparative Study between Physics, Electrical and Data Driven Lithium-Ion Battery Voltage Modeling Approaches , 2022, SAE technical paper series.

[5]  Hao-bin Jiang,et al.  Electrochemical and thermal characteristics of prismatic lithium-ion battery based on a three-dimensional electrochemical-thermal coupled model , 2021 .

[6]  Luigi Piegari,et al.  Integrated electro-thermal model for pouch lithium ion batteries , 2021, Math. Comput. Simul..

[7]  S. Kær,et al.  Thermal Characterizations of a Lithium Titanate Oxide-Based Lithium-Ion Battery Focused on Random and Periodic Charge-Discharge Pulses , 2021, Applied System Innovation.

[8]  Shichun Yang,et al.  A review on recent progress, challenges and perspective of battery thermal management system , 2021, International Journal of Heat and Mass Transfer.

[9]  Wei Li,et al.  A resistance-based electro-thermal coupled model for an air-cooled battery pack that considers branch current variation , 2021 .

[10]  Yingxia Huang,et al.  Coupled prediction model of liquid-cooling based thermal management system for cylindrical lithium-ion module , 2020 .

[11]  P. Hu,et al.  Numerical study on thermal behavior and a liquid cooling strategy for lithium‐ion battery , 2020, International Journal of Energy Research.

[12]  Z. Gao,et al.  Comprehensive electro-thermal model of 26650 lithium battery for discharge cycle under parametric and temperature variations , 2020 .

[13]  Shuofeng Wang,et al.  Study of non-uniform temperature and discharging distribution for lithium-ion battery modules in series and parallel connection , 2020, Applied Thermal Engineering.

[14]  Mingbiao Chen,et al.  Thermal performance of battery module based on multilayer electro-thermal coupling model , 2019, Energy Procedia.

[15]  Qingsong Wang,et al.  The effect of electrode design parameters on battery performance and optimization of electrode thickness based on the electrochemical–thermal coupling model , 2019, Sustainable Energy & Fuels.

[16]  E. Schaltz,et al.  Heat Loss Measurement of Lithium Titanate Oxide Batteries under Fast Charging Conditions by Employing Isothermal Calorimeter , 2018, Batteries.

[17]  Fangming Jiang,et al.  Numerical modeling and analysis of the thermal behavior of NCM lithium-ion batteries subjected to very high C-rate discharge/charge operations , 2018 .

[18]  Christian Veje,et al.  Numerical analysis of heat propagation in a battery pack using a novel technology for triggering thermal runaway , 2017 .

[19]  Xiangming He,et al.  Electro-thermal modeling and experimental validation for lithium ion battery , 2012 .

[20]  Hongwen He,et al.  Online estimation of model parameters and state-of-charge of LiFePO4 batteries in electric vehicles , 2012 .

[21]  Hongwen He,et al.  Evaluation of Lithium-Ion Battery Equivalent Circuit Models for State of Charge Estimation by an Experimental Approach , 2011 .

[22]  Andreas Nyman,et al.  Analysis of the Polarization in a Li-Ion Battery Cell by Numerical Simulations , 2010 .

[23]  Jun Liu,et al.  Effect of entropy change of lithium intercalation in cathodes and anodes on Li-ion battery thermal management , 2010 .

[24]  Seongjun Lee,et al.  State-of-charge and capacity estimation of lithium-ion battery using a new open-circuit voltage versus state-of-charge , 2008 .

[25]  Tsutomu Ohzuku,et al.  Solid-State Chemistry and Electrochemistry of LiCo1 ∕ 3Ni1 ∕ 3Mn1 ∕ 3O2 for Advanced Lithium-Ion Batteries III. Rechargeable Capacity and Cycleability , 2007 .

[26]  Wenquan Lu,et al.  Determination of the reversible and irreversible heats of LiNi0.8Co0.2O2/mesocarbon microbead Li-ion cell reactions using isothermal microcalorimetery , 2006 .

[27]  Lars Ole Valøen,et al.  Transport Properties of LiPF6-Based Li-Ion Battery Electrolytes , 2005 .

[28]  Chester G. Motloch,et al.  A capacity and power fade study of Li-ion cells during life cycle testing , 2003 .

[29]  J. Newman,et al.  Heats of mixing and of entropy in porous insertion electrodes , 2003 .

[30]  R. Staniewicz,et al.  Improved low temperature performance of lithium ion cells with quaternary carbonate-based electrolytes , 2003 .

[31]  Tony Markel,et al.  ADVISOR: A SYSTEMS ANALYSIS TOOL FOR ADVANCED VEHICLE MODELING , 2002 .

[32]  Valerie H. Johnson,et al.  Battery performance models in ADVISOR , 2002 .