Stability problems and input impedance improvement for cascaded power electronic systems

This paper reviews the instability problem and the analysis methods for the cascaded power electronics system. Based on the review, a compromised method is proposed. Due to the fact that the instability is caused by impedance interaction, analysis and improvement approaches for the input impedances of both PFC converters and DC/DC converters are presented in this paper. Simulation results verify the theoretical analysis.

[1]  José Antenor Pomilio,et al.  Interaction between EMI filter and power factor preregulators with average current control: analysis and design considerations , 1999, IEEE Trans. Ind. Electron..

[2]  Fred C. Lee,et al.  Impedance specifications for stable DC distributed power systems , 2002 .

[3]  J.D. Van Wyk,et al.  Power electronics technology at the dawn of the new millenium-status and future , 1999, 30th Annual IEEE Power Electronics Specialists Conference. Record. (Cat. No.99CH36321).

[4]  Fred C. Lee,et al.  On-line measurement on stability margin of DC distributed power system , 2000, APEC 2000. Fifteenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.00CH37058).

[5]  Fred C. Lee,et al.  Stability margin monitoring for DC distributed power systems via current/voltage perturbation , 2001, APEC 2001. Sixteenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.01CH37181).

[6]  C.D. Davidson,et al.  Compatibility of switchmode rectifiers with engine generators , 2000, INTELEC. Twenty-Second International Telecommunications Energy Conference (Cat. No.00CH37131).

[7]  S. Mulukutla,et al.  Analysis of the instability of PFC power supplies with various AC sources , 1994, Proceedings of 1994 IEEE Applied Power Electronics Conference and Exposition - ASPEC'94.

[8]  Slobodan Cuk,et al.  A general unified approach to modelling switching-converter power stages , 1976, 1970 IEEE Power Electronics Specialists Conference.

[9]  Jian Sun Input impedance analysis of single-phase PFC converters , 2005, IEEE Transactions on Power Electronics.

[10]  R. D. Middlebrook,et al.  Input filter considerations in design and application of switching regulators. , 1976 .

[11]  Fred C. Lee,et al.  A method of defining the load impedance specification for a stable distributed power system , 1993 .

[12]  Fred C. Lee,et al.  Individual load impedance specification for a stable DC distributed power system , 1999, APEC '99. Fourteenth Annual Applied Power Electronics Conference and Exposition. 1999 Conference Proceedings (Cat. No.99CH36285).