Insights into intragranular precipitation and strengthening effect in Al2O3/SmAlO3 ceramic with eutectic composition

[1]  H. Fu,et al.  Direct formation of Al2O3/GdAlO3/ZrO2 ternary eutectic ceramics by selective laser melting: Microstructure evolutions , 2018, Journal of the European Ceramic Society.

[2]  Yong Ma,et al.  In situ fabrication and microstructural evolution of Al2O3-ZrO2 nanoeutectic ceramics by a novel pulse discharge plasma assisted melting method , 2018, Journal of the European Ceramic Society.

[3]  L. Marcin,et al.  Effective elastic properties and residual stresses in directionally solidified eutectic Al2O3/YAG/ZrO2 ceramics estimated by finite element analysis , 2017, Journal of Materials Science.

[4]  Yong Ma,et al.  Microstructure and mechanical properties of ceramics obtained from chemically co-precipitated Al2O3-GdAlO3 nano-powders with eutectic composition , 2017 .

[5]  Feng Yang,et al.  Increased electrical conductivity and the mechanism of samarium‐doped ceria/Al2O3 nanocomposite electrolyte , 2017 .

[6]  L. Mazerolles,et al.  Microstructure, interfaces and creep behaviour of Al2O3–Sm2O3 (ZrO2) eutectic ceramic composites , 2017, Journal of Materials Science.

[7]  J. Ouyang,et al.  Synthesis , Densification and Characterization of Nanosized Oxide Ceramic Powders with Eutectic Compositions by Heating of Alcohol-Aqueous Salt Solutions , 2017 .

[8]  P. Klimczyk,et al.  Structural and mechanical aspects of multilayer graphene addition in alumina matrix composites–validation of computer simulation model , 2016 .

[9]  Harbin,et al.  Synthesis, Densification and Characterization of Nanosized Oxide Ceramic Powders with Eutectic Compositions by Heating of Alcohol-Aqueous Salt Solutions , 2016 .

[10]  A. Mukhopadhyay,et al.  ‘Age-hardened alloy’ based on bulk polycrystalline oxide ceramic , 2015 .

[11]  H. Yan,et al.  Mechanical properties of graphene platelet-reinforced alumina ceramic composites , 2013 .

[12]  Martin P. Harmer,et al.  The Phase Behavior of Interfaces , 2011, Science.

[13]  A. Mukhopadhyay,et al.  Relationship between microstructure and abrasive wear resistance of Al2O3–FeAl2O4 nanocomposites produced via solid-state precipitation , 2011 .

[14]  A. Mukhopadhyay,et al.  Effect of yttria doping on the microstructure and mechanical properties of Al2O3–FeAl2O4 nanocomposites developed via solid state precipitation , 2010 .

[15]  I. Ahmad,et al.  Multi-walled carbon nanotubes reinforced Al2O3 nanocomposites: Mechanical properties and interfacial investigations , 2010 .

[16]  G. Hilmas,et al.  Pressureless sintering of carbon nanotube–Al2O3 composites , 2010 .

[17]  S. A. Hassanzadeh-Tabrizi,et al.  Reverse precipitation synthesis and characterization of CeO2 nanopowder , 2010 .

[18]  A. Limpichaipanit,et al.  The relationship between microstructure, fracture and abrasive wear in Al2O3/SiC nanocomposites and microcomposites containing 5 and 10% SiC , 2009 .

[19]  Yi Tan,et al.  Fabrication and mechanical properties of nano-/micro-sized Al2O3/SiC composites , 2009 .

[20]  T. Kojima,et al.  Formation of ultrafine eutectic-like microstructures of various rare earth oxide-Al_2O_3 systems by use of amorphous phases , 2008 .

[21]  W. Tuan,et al.  Critical zirconia amount to enhance the strength of alumina , 2008 .

[22]  H. Schneider,et al.  Structure and properties of mullite—A review , 2008 .

[23]  W. Craig Carter,et al.  Complexion: A new concept for kinetic engineering in materials science , 2007 .

[24]  P. Ferreira,et al.  What is behind the inverse Hall–Petch effect in nanocrystalline materials? , 2007 .

[25]  R. Bradt,et al.  On the Vickers Indentation Fracture Toughness Test , 2007 .

[26]  J. Llorca,et al.  Directionally solidified eutectic ceramic oxides , 2006 .

[27]  K. L. Edwards,et al.  Selecting materials for optimum use in engineering components , 2005 .

[28]  Y. Choa,et al.  Strengthening and Toughening Mechanisms of Ceramic Nanocomposites , 2005 .

[29]  M. Hÿtch,et al.  Microstructures and interfaces in directionally solidified oxide–oxide eutectics , 2005 .

[30]  Y. Waku,et al.  High temperature strength and thermal stability for melt growth composite , 2005 .

[31]  W. M. Rainforth.  The wear behaviour of oxide ceramics-A Review , 2004 .

[32]  T. Ungár.  Microstructural parameters from X-ray diffraction peak broadening , 2004 .

[33]  F. Motta,et al.  Wetting behaviour of SiC ceramics: Part II—Y2O3/Al2O3 and Sm2O3/Al2O3 , 2004 .

[34]  C. Mitterer,et al.  Self-organized nanostructures in the Ti–Al–N system , 2003 .

[35]  B. Chandrasekhar,et al.  Effect of ceria on the physical, mechanical and thermal properties of yttria stabilized zirconia toughened alumina , 2003 .

[36]  A. Chokshi.  Diffusion creep in oxide ceramics , 2002 .

[37]  P. Ruterana,et al.  Misfit relaxation of the AlN/Al2O3 (0001) interface , 2001 .

[38]  Y. Waku,et al.  Fracture and deformation behaviour of melt growth composites at very high temperatures , 2001 .

[39]  Jeffrey M. Rickman,et al.  Improved tensile creep properties of yttrium- and lanthanum-doped alumina: a solid solution effect , 2001 .

[40]  L. Gao,et al.  Preparation and microstructure of polycrystalline Al2O3–YAG composites , 2001 .

[41]  S. Durbin,et al.  Phase identification of Al2O3/RE3Al5O12 and Al2O3/REAlO3 (RE=Sm–Lu, Y) eutectics , 2000 .

[42]  B. Lesage,et al.  Yttrium diffusion in α-alumina single crystal , 1998 .

[43]  K. Shimizu,et al.  A ductile ceramic eutectic composite with high strength at 1,873 K , 1997, Nature.

[44]  V. Vítek,et al.  Atomic structure of epitaxial Nb-Al2O3 interfaces II. Misfit dislocations , 1997 .

[45]  Kiyoshi Hirao,et al.  High‐Strength and High‐Fracture‐Toughness Ceramics in the Al2O3/LaAl11O18 Systems , 1995 .

[46]  A. Rosen,et al.  On the validity of the hall-petch relationship in nanocrystalline materials , 1989 .

[47]  K. Niihara,et al.  A fracture mechanics analysis of indentation-induced Palmqvist crack in ceramics , 1983 .

[48]  E. A. Charles,et al.  Fracture Toughness Determinations by Indentation , 1976 .

[49]  Michael F. Ashby,et al.  Intergranular fracture at elevated temperature , 1975 .

[50]  Mel I. Mendelson,et al.  Average Grain Size in Polycrystalline Ceramics , 1969 .