Force modelling in shallow cuts with large negative rake angle and large nose radius tools—application to hard turning

[1]  P. Albrecht,et al.  New Developments in the Theory of the Metal-Cutting Process: Part I. The Ploughing Process in Metal Cutting , 1960 .

[2]  D. William Wu,et al.  Application of a comprehensive dynamic cutting force model to orthogonal wave-generating processes , 1988 .

[3]  A. Sadat,et al.  Finite element simulation of orthogonal cutting - a survey , 1988 .

[4]  David E. Goldberg,et al.  Genetic Algorithms in Search Optimization and Machine Learning , 1988 .

[5]  Yung C. Shin,et al.  Modeling of Tool Forces for Worn Tools: Flank Wear Effects , 1996 .

[6]  C. Rubenstein.  The edge force components in oblique cutting , 1990 .

[7]  C. Liu,et al.  Mechanical Properties of Hardened AISI 52100 Steel in Hard Machining Processes , 2002 .

[8]  Shiv Gopal Kapoor,et al.  A Slip-Line Field for Ploughing During Orthogonal Cutting , 1997, Manufacturing Science and Engineering: Volume 2.

[9]  M. E. Merchant.  Mechanics of the Metal Cutting Process. II. Plasticity Conditions in Orthogonal Cutting , 1945 .

[10]  Joseph A. Arsecularatne,et al.  THE OXLEY MODELING APPROACH, ITS APPLICATIONS AND FUTURE DIRECTIONS , 2000 .

[11]  P. L. B. Oxley,et al.  Rate of Strain Effect in Metal Cutting , 1963 .

[12]  P.L.B. Oxley,et al.  Prediction of Chip Flow Direction and Cutting Forces in Oblique Machining with Nose Radius Tools , 1995 .

[13]  Steven Y. Liang,et al.  Cutting forces modeling considering the effect of tool thermal property—application to CBN hard turning , 2003 .

[14]  Gérard Poulachon,et al.  On modelling the influence of thermo-mechanical behavior in chip formation during hard turning of 100Cr6 bearing steel , 2001 .

[15]  G. V. Stabler.  The Fundamental Geometry of Cutting Tools , 1951 .

[16]  Hossam A. Kishawy,et al.  Effects of process parameters on material side flow during hard turning , 1999 .

[17]  M. C. Shaw,et al.  Mechanics of Machining: An Analytical Approach to Assessing Machinability , 1989 .

[18]  David K. Aspinwall,et al.  Modelling of temperature and forces when orthogonally machining hardened steel , 1999 .