Absolute Position Sensing Based on a Robust Differential Capacitive Sensor with a Grounded Shield Window

A simple differential capacitive sensor is provided in this paper to measure the absolute positions of length measuring systems. By utilizing a shield window inside the differential capacitor, the measurement range and linearity range of the sensor can reach several millimeters. What is more interesting is that this differential capacitive sensor is only sensitive to one translational degree of freedom (DOF) movement, and immune to the vibration along the other two translational DOFs. In the experiment, we used a novel circuit based on an AC capacitance bridge to directly measure the differential capacitance value. The experimental result shows that this differential capacitive sensor has a sensitivity of 2 × 10−4 pF/μm with 0.08 μm resolution. The measurement range of this differential capacitive sensor is 6 mm, and the linearity error are less than 0.01% over the whole absolute position measurement range.

[1]  Pengcheng Hu,et al.  Measurement and control of the movable coil position of a joule balance with a system based on a laser heterodyne interferometer , 2014 .

[2]  N. Bobroff Recent advances in displacement measuring interferometry , 1993 .

[3]  Hyeong-Joon Ahn,et al.  CONTROL PERFORMANCE IMPROVEMENT OF AN EMV SYSTEM USING A PM/EM HYBRID ACTUATOR , 2007 .

[4]  R. Ryan Vallance,et al.  Correcting capacitive displacement measurements in metrology applications with cylindrical artifacts , 2005 .

[5]  Pengcheng Hu,et al.  A Capacitive Sensor for the Measurement of Departure From the Vertical Movement , 2016, IEEE Transactions on Instrumentation and Measurement.

[6]  Pengcheng Hu,et al.  Analysis of a Segmented Annular Coplanar Capacitive Tilt Sensor with Increased Sensitivity , 2016, Sensors.

[7]  I A Robinson,et al.  Watt and joule balances , 2014 .

[8]  E. Yoon,et al.  A new capacitive displacement sensor with high accuracy and long range , 2005, The 13th International Conference on Solid-State Sensors, Actuators and Microsystems, 2005. Digest of Technical Papers. TRANSDUCERS '05..

[9]  J. K. Webb,et al.  The precise measurement of capacitance , 1955 .

[10]  Gunnar Rasmussen Transducers and instrumentation , 1986 .

[11]  L. H. Ford The effect of humidity on the calibration of precision air capacitors , 1949 .

[12]  Xinghui Huang,et al.  Nanoprecision MEMS Capacitive Sensor for Linear and Rotational Positioning , 2009, Journal of Microelectromechanical Systems.

[13]  Mohd Saleem,et al.  Measurement of simulated high value inductor using precision capacitance bridge , 2014, 29th Conference on Precision Electromagnetic Measurements (CPEM 2014).

[14]  G. A. Bertone,et al.  Elimination of the anomalous humidity effect in precision capacitance based transducers , 1991 .

[15]  J. Lecoeur,et al.  New method for measuring the differential capacity in electrochemistry , 1998 .

[16]  M. Ashby,et al.  The selection of sensors , 2001 .

[17]  Andrew J. Fleming,et al.  A review of nanometer resolution position sensors: Operation and performance , 2013 .

[18]  V. Stornelli,et al.  A simplified architecture for differential capacitance sensors , 2015, 2015 XVIII AISEM Annual Conference.

[19]  M. Horenstein,et al.  Differential capacitive position sensor for planar MEMS structures with vertical motion , 2000 .

[20]  Nirupama Mandal,et al.  Study on Further Modification of Non-Contact Capacitance Type-Level Transducer for a Conducting Liquid , 2015, IEEE Sensors Journal.

[21]  Dong-Chul Han,et al.  A disk-type capacitive sensor for five-dimensional motion measurements , 2008 .

[22]  Z. Zhang,et al.  The progress of joule balance in NIM , 2010, CPEM 2010.

[23]  Štefan Lányi Analysis of linearity errors of inverse capacitance position sensors , 1998 .

[24]  Yu Hongxiang,et al.  Novel capacitive displacement sensor based on interlocking stator electrodes with sequential commutating excitation , 2015 .