Microstructuring of SU-8 photoresist by UV-assisted thermal imprinting with non-transparent mold

In this study, we explored a rapid and low-cost process for patterning in a SU-8 photoresist by thermal imprinting with a non-transparent mold such as Ni mold. One of major obstacles in the process is that the extremely good formability of uncured SU-8 even near room temperature causes the collapse of imprinted patterns during and after de-molding because a sample cannot be exposed to UV light during imprinting owing to the non-transparency of a mold. To overcome this problem, un-cured SU-8 resists were pre-treated with UV light, heat, and O"2 plasma for controlling their formability, and applied to thermal imprint tests to be compared each other in terms of the replication fidelity. As a result, a SU-8 sample pre-treated with UV light for 8s resulted in the best replication quality for given imprint conditions and mold dimensions, and we could successfully replicate micro patterns in SU-8 resist without a quartz mold. As compared with conventional UV-imprint processes, this process has potential merits such as a lower mold cost, an easier mold release and a less air-entrapment.