论文信息 - Pentacene thin-film transistors with polymeric gate dielectric

Pentacene thin-film transistors with polymeric gate dielectric

Pentacene thin-film transistors have been obtained using polymethyl methacrylate as a gate dielectric. The maximum process temperature was 170 °C, which corresponds to the baking of the polymeric gate dielectric. These devices presented good electrical performances with field-effect mobilities of 0.01 cm2 V-1 s-1 and low threshold voltages (-15 V). Atomic force microscopy studies reveal that the microstructure of pentacene layers is strongly conditioned by the surface morphology of the dielectric.

[1] Debra J. Mascaro,et al. Organic thin-film transistors: A review of recent advances , 2001, IBM J. Res. Dev..

[2] C. Dimitrakopoulos,et al. Low-voltage organic transistors on plastic comprising high-dielectric constant gate insulators , 1999, Science.

[3] C. Voz,et al. Pentacene thin-films obtained by thermal evaporation in high vacuum , 2003 .

[4] D. A. Fleming,et al. An improved secondary electron flood helps control ion implant charge , 2000 .

[5] H. Sirringhaus,et al. High-Resolution Ink-Jet Printing of All-Polymer Transistor Circuits , 2000, Science.

[6] T. Jackson,et al. Pentacene organic thin-film transistors-molecular ordering and mobility , 1997, IEEE Electron Device Letters.

[7] Stephen R. Forrest,et al. Effects of film morphology and gate dielectric surface preparation on the electrical characteristics of organic-vapor-phase-deposited pentacene thin-film transistors , 2002 .

[8] Robert A. Street,et al. Pentacene thin film transistors on inorganic dielectrics: Morphology, structural properties, and electronic transport , 2003 .