Multiplication characteristics of InP/InGaAs avalanche photodiodes with a thicker charge layer
暂无分享,去创建一个
[1] S. M. Sze,et al. Physics of semiconductor devices , 1969 .
[2] G. E. Stillman,et al. Electron and hole impact ionization coefficients in InP determined by photomultiplication measurements , 1982 .
[3] T. Mikawa,et al. Excess noise design of InP/GaInAsP/GaInAs avalanche photodiodes , 1986 .
[4] Sethumadhavan Chandrasekhar,et al. Multiplication noise of wide-bandwidth InP/InGaAsP/InGaAs avalanche photodiodes , 1989 .
[5] D. G. Knight,et al. Planar InP/InGaAs avalanche photodetectors with partial charge sheet in device periphery , 1990 .
[6] Y. Liu,et al. In/sub 0.53/Ga/sub 0.47/As/InP floating guard ring avalanche photodiodes fabricated by double diffusion , 1990, IEEE Photonics Technology Letters.
[7] W. Tsang,et al. InP/InGaAsP/InGaAs SAGM avalanche photodiode with delta-doped multiplication region , 1991 .
[8] R. Kuchibhotla,et al. Delta-doped avalanche photodiodes for high bit-rate lightwave receivers , 1991 .
[9] Michael J. Lange,et al. A planar InP/InGaAs avalanche photodiode with floating guard ring and double diffused junction , 1992 .
[10] T. Baird,et al. High-frequency performance of separate absorption grading, charge, and multiplication InP/InGaAs avalanche photodiodes , 1993, IEEE Photonics Technology Letters.
[11] M. J. Deen,et al. Temperature dependence of breakdown voltages in separate absorption, grading, charge, and multiplication InP/InGaAs avalanche photodiodes , 1995 .
[12] Yong-hee Lee,et al. High-performance InGaAs/InP avalanche photodiode for a 2.5 Gb s-1 optical receiver , 1995 .
[13] M. Deen,et al. Multiplication in separate absorption, grading, charge, and multiplication InP-InGaAs avalanche photodiodes , 1995 .
[14] Kyung-Sook Hyun,et al. Effect of multiplication layer width on breakdown voltage in InP/InGaAs avalanche photodiode , 1995 .
[15] Kyung-Sook Hyun,et al. Breakdown characteristics in InP/InGaAs avalanche photodiode with p-i-n multiplication layer structure , 1997 .
[16] M. J. Deen,et al. A simplified approach to time-domain modeling of avalanche photodiodes , 1998 .
[17] P. Chakrabarti,et al. Noise performance of an InP/InGaAs superlattice avalanche photodiode , 1999 .
[18] M. J. Deen,et al. Modeling of two-dimensional gain profiles for InP-InGaAs avalanche photodiodes with a stochastic approach , 1999 .
[19] J. Yu,et al. Investigations of floating guard structures in a planar InGaAs/InGaAsP/InP avalanche photodiode , 2001 .
[20] M. J. Deen,et al. Temperature dependent studies of InP/InGaAs avalanche photodiodes based on time domain modeling , 2001 .
[21] Ilgu Yun,et al. Effect of different etching processes on edge breakdown suppression for planar InP/InGaAs avalanche photodiodes , 2002 .
[22] M. Deen,et al. A new model for avalanche build-up of carriers in a SAGCM avalanche photodiode , 2002 .
[23] M. Teich,et al. Effect of stochastic dead space on noise in avalanche photodiodes , 2004, IEEE Transactions on Electron Devices.
[24] Ilgu Yun,et al. Investigation of manufacturing variations of planar InP/InGaAs avalanche photodiodes for optical receivers , 2004, Microelectron. J..