Power Flow Control Based Solely on Slow Feedback Loop for Heart Pump Applications

This paper proposes a new control method for regulating power flow via transcutaneous energy transfer (TET) for implantable heart pumps. Previous work on power flow controller requires a fast feedback loop that needs additional switching devices and resonant capacitors to be added to the primary converter. The proposed power flow controller eliminates these additional components, and it relies solely on a slow feedback loop to directly drive the primary converter to meet the heart pump power demand and ensure zero voltage switching. A controlled change in switching frequency varies the resonant tank shorting period of a current-fed push-pull resonant converter, thus changing the magnitude of the primary resonant voltage, as well as the tuning between primary and secondary resonant tanks. The proposed controller has been implemented successfully using an analogue circuit and has reached an end-to-end power efficiency of 79.6% at 10 W with a switching frequency regulation range of 149.3 kHz to 182.2 kHz.

[1]  Aiguo Patrick Hu,et al.  Novel technology for the provision of power to implantable physiological devices. , 2007, Journal of applied physiology.

[2]  D. Budgett,et al.  Experimental thermal study of a TET system for implantable biomedical devices , 2008, 2008 IEEE Biomedical Circuits and Systems Conference.

[3]  Aiguo Patrick Hu,et al.  Efficient Power-Transfer Capability Analysis of the TET System Using the Equivalent Small Parameter Method , 2011, IEEE Transactions on Biomedical Circuits and Systems.

[4]  Aiguo Patrick Hu,et al.  Experimental Study of a TET System for Implantable Biomedical Devices , 2009, IEEE Transactions on Biomedical Circuits and Systems.

[5]  Robert L Kormos,et al.  Infection after implantation of pulsatile mechanical circulatory support devices. , 2010, The Journal of thoracic and cardiovascular surgery.

[6]  Aiguo Patrick Hu,et al.  Selected resonant converters for IPT power supplies , 2001 .

[7]  Udaya K. Madawala,et al.  Mathematical model for split-capacitor push-pull parallel resonant converter in Buck mode , 2008 .

[8]  Udaya K. Madawala,et al.  Analysis of Split-Capacitor Push-Pull Parallel Resonant Converter in normal mode , 2008 .

[9]  D.J. Thrimawithana,et al.  Operation of a Split-Capacitor Push-Pull Parallel Resonant Converter in Buck Mode , 2007, IECON 2007 - 33rd Annual Conference of the IEEE Industrial Electronics Society.

[10]  A.P. Hu,et al.  Determining Multiple Steady-State ZCS Operating Points of a Switch-Mode Contactless Power Transfer System , 2009, IEEE Transactions on Power Electronics.

[11]  D.J. Thrimawithana,et al.  Analysis of Split-Capacitor Push–Pull Parallel-Resonant Converter in Boost Mode , 2008, IEEE Transactions on Power Electronics.

[12]  M. Soljačić,et al.  Wireless Power Transfer via Strongly Coupled Magnetic Resonances , 2007, Science.

[13]  Aiguo Patrick Hu,et al.  Steady state analysis of a capacitively coupled contactless power transfer system , 2009, 2009 IEEE Energy Conversion Congress and Exposition.

[14]  U. Madawala,et al.  A Novel Buck-Boost Control Technique for Push-Pull Parallel-Resonant Converters , 2006, Annual Conference of the IEEE Industrial Electronics Society.

[15]  Aiguo Patrick Hu,et al.  A Frequency Control Method for Regulating Wireless Power to Implantable Devices , 2008, IEEE Transactions on Biomedical Circuits and Systems.

[16]  Grant Covic,et al.  Power transfer capability and bifurcation phenomena of loosely coupled inductive power transfer systems , 2004, IEEE Transactions on Industrial Electronics.

[17]  M. Soljačić,et al.  Efficient wireless non-radiative mid-range energy transfer , 2006, physics/0611063.