Characterization of Rolling Contact Fatigue Cracks in Rails by Eddy Current Pulsed Thermography

Locating and characterizing rolling contact fatigue (RCF) cracks in rails is gaining attention in the railway industry. Eddy current pulsed thermography (ECPT) can detect such cracks by combining the benefits of electromagnetic excitation and thermal diffusion. To date, most studies focus on investigating specific features based on artificial defects, and verification on real cracks is lacking. In this article, to establish the best means of characterizing cracks of different inclination angles, eight spatial and temporal ECPT features are evaluated on idealized and real RCF cracks. Results show that longer time slots and pulse durations make the relations clearer. For the evaluation of real RCF cracks, the area-based and the kurtosis-based features are the most suitable and robust measures for characterizing inclination angles.

[1]  E. Magel,et al.  Rolling Contact Fatigue: A Comprehensive Review , 2011 .

[2]  Jien Ma,et al.  Identifying PV Module Mismatch Faults by a Thermography-Based Temperature Distribution Analysis , 2014, IEEE Transactions on Device and Materials Reliability.

[3]  X. Maldague,et al.  Introduction to NDT by Active Infrared Thermography1 , 1995 .

[4]  M Ph Papaelias,et al.  A review on non-destructive evaluation of rails: State-of-the-art and future development , 2008 .

[5]  A. W. M. van den Enden,et al.  Discrete Time Signal Processing , 1989 .

[6]  Gui Yun Tian,et al.  Probability of Detection for Eddy Current Pulsed Thermography of Angular Defect Quantification , 2018, IEEE Transactions on Industrial Informatics.

[7]  Carosena Meola.  Infrared thermography of masonry structures , 2007 .

[8]  Gui Yun Tian,et al.  DC-Biased Magnetization Based Eddy Current Thermography for Subsurface Defect Detection , 2019, IEEE Transactions on Industrial Informatics.

[9]  David B. Durocher,et al.  Infrared Windows Applied in Switchgear Assemblies: Taking Another Look , 2015, IEEE Transactions on Industry Applications.

[10]  Beate Oswald-Tranta,et al.  Induction Thermography for Surface Crack Detection and Depth Determination , 2018 .

[11]  Roger Lewis,et al.  Wear and damage transitions of wheel and rail materials under various contact conditions , 2016 .

[12]  Soib Taib,et al.  Application of infrared thermography for predictive/preventive maintenance of thermal defect in electrical equipment , 2013 .

[13]  Zili Li,et al.  A study of rolling contact fatigue crack growth in U75V and U71Mn rails , 2011 .

[14]  Feng Liu,et al.  Investigations for inclination angle characterization of angular defects using eddy current pulsed thermography , 2019, Infrared Physics & Technology.

[15]  Gui Yun Tian,et al.  Quantitative evaluation of angular defects by pulsed eddy current thermography , 2010 .

[16]  Changzhi Wu,et al.  An overview of corrosion defect characterization using active infrared thermography , 2019, Infrared Physics & Technology.

[17]  L. Rosenhead.  Conduction of Heat in Solids , 1947, Nature.

[18]  Jianbo Wu,et al.  Comparison Study of Different Features for Pocket Length Quantification of Angular Defects Using Eddy Current Pulsed Thermography , 2019, IEEE Transactions on Instrumentation and Measurement.

[19]  Zlatko Hanic,et al.  Measurement of Excitation Winding Temperature on Synchronous Generator in Rotation Using Infrared Thermography , 2012, IEEE Transactions on Industrial Electronics.

[20]  Rene de Jesus Romero-Troncoso,et al.  Recent Industrial Applications of Infrared Thermography: A Review , 2019, IEEE Transactions on Industrial Informatics.

[21]  Gemma Nicholson,et al.  Modelling and experimental measurements of idealised and light-moderate RCF cracks in rails using an ACFM sensor , 2011 .

[22]  Gui Yun Tian,et al.  Investigation into eddy current pulsed thermography for rolling contact fatigue detection and characterization , 2015 .

[23]  W. K. Boyd,et al.  STRESS-CORROSION CRACKING OF ALUMINUM ALLOYS, , 1965 .

[24]  C. Davis,et al.  Influential microstructural changes on rolling contact fatigue crack initiation in pearlitic rail steels , 2005 .

[25]  Fernando Delgado,et al.  Field winding fault diagnosis in DC motors during manufacturing using thermal monitoring , 2011 .

[26]  Martin Johnston,et al.  Variational Bayesian Subgroup Adaptive Sparse Component Extraction for Diagnostic Imaging System , 2018, IEEE Transactions on Industrial Electronics.

[27]  P. Cawley,et al.  Eddy-current induced thermography—probability of detection study of small fatigue cracks in steel, titanium and nickel-based superalloy , 2012 .

[28]  Clemente Ibarra-Castanedo,et al.  Automated Dynamic Inspection Using Active Infrared Thermography , 2018, IEEE Transactions on Industrial Informatics.

[29]  Xavier Maldague,et al.  Infrared thermography processing based on higher-order statistics , 2010 .