Load partitioning between ferrite and cementite during elasto-plastic deformation of an ultrahigh-carbon steel

[1]  B. Clausen,et al.  Load sharing in tungsten fiber reinforced Kanthal composites , 2006 .

[2]  D. Dunand,et al.  Load partitioning in aluminum syntactic foams containing ceramic microspheres , 2006 .

[3]  S. Stock,et al.  Internal strains and stresses measured in cortical bone via high-energy X-ray diffraction. , 2005, Journal of structural biology.

[4]  U. Lienert,et al.  The use of high energy X-rays from the Advanced Photon Source to study stresses in materials , 2005 .

[5]  J. Hanan,et al.  Strain evolution after fiber failure in a single-fiber metal matrix composite under cyclic loading , 2005 .

[6]  Mark A.M. Bourke,et al.  Measurement and modeling of room temperature co-deformation in WC-10 wt.% Co , 2005 .

[7]  Y. Morii,et al.  In situ neutron diffraction of heavily drawn steel wires with ultra-high strength under tensile loading , 2005 .

[8]  T. Kamiyama,et al.  Elastic Strains of Cementite in a Pearlite Steel during Tensile Deformation Measured by Neutron Diffraction , 2004 .

[9]  Leon Mishnaevsky,et al.  Three-dimensional numerical testing of microstructures of particle reinforced composites , 2004 .

[10]  L. Edwards,et al.  Neutron diffraction measurement of the internal stresses following heat treatment of a plastically deformed Al/SiC particulate metal–matrix composite , 2004 .

[11]  H. Wenk,et al.  Texture and Anisotropy , 2004 .

[12]  Nikhilesh Chawla,et al.  Three-dimensional (3D) microstructure visualization and finite element modeling of the mechanical behavior of SiC particle reinforced aluminum composites , 2004 .

[13]  T. Buslaps,et al.  In-situ investigation of strain relaxation in an Al/Si-MMC using high energy synchrotron radiation , 2004 .

[14]  P. Withers,et al.  Interphase and intergranular stress generation in carbon steels , 2004 .

[15]  M. Preuss,et al.  The effect of fibre fractures in the bridging zone of fatigue cracked Ti–6Al–4V/SiC fibre composites , 2004 .

[16]  Mark R. Daymond,et al.  Intergranular stresses in polycrystalline fatigue: diffraction measurement and self-consistent modelling , 2004 .

[17]  Javier Segurado,et al.  Three-dimensional multiparticle cell simulations of deformation and damage in sphere-reinforced composites , 2004 .

[18]  D. Dunand,et al.  Elasto-plastic load transfer in bulk metallic glass composites containing ductile particles , 2003 .

[19]  Dean R. Haeffner,et al.  Microscale damage evolution and stress redistribution in Ti-SiC fiber composites , 2003 .

[20]  R. Peng,et al.  Strain and texture analysis of coatings using high-energy x-rays , 2003 .

[21]  S. Schmauder,et al.  Finite element modelling of Al/SiCp metal matrix composites with particles aligned in stripes—a 2D–3D comparison , 2003 .

[22]  Javier Segurado,et al.  A numerical investigation of the effect of particle clustering on the mechanical properties of composites , 2003 .

[23]  D. Dunand,et al.  Diffraction strain measurements in a partially crystallized bulk metallic glass composite containing ductile particles , 2003 .

[24]  H. Shen,et al.  3D finite element analysis of particle-reinforced aluminum , 2002 .

[25]  Javier Segurado,et al.  A numerical approximation to the elastic properties of sphere-reinforced composites , 2002 .

[26]  M. Preuss,et al.  Interfacial Shear Strength of Ti/SiC Fibre Composites Measured by Synchrotron Strain Measurement , 2002 .

[27]  P. Withers,et al.  A neutron diffraction study of creep and damage occurrence in an A359/SiC composite , 2002 .

[28]  A. Korsunsky,et al.  Advanced Strain Analysis by High Energy Synchrotron X-Ray Diffraction , 2002 .

[29]  M. Preuss,et al.  SiC single fibre full-fragmentation during straining in a Ti–6Al–4V matrix studied by synchrotron X-rays , 2002 .

[30]  J. Mackerle.  Metal matrix composites: finite element and boundary element analyses. A bibliography (1997-2000) , 2002 .

[31]  R. Lin Peng,et al.  Grain-orientation-dependent residual stress and the effect of annealing in cold-rolled stainless steel , 2002 .

[32]  M. Daymond,et al.  Elastoplastic deformation of ferritic steel and cementite studied by neutron diffraction and self-consistent modelling , 2002 .

[33]  S. Hartmann,et al.  Thermoelastic strain of the lattice plane spacings in white cast iron , 2002 .

[34]  T. Tschentscher,et al.  Texture analysis with high‐energy synchrotron radiation , 2002 .

[35]  J. Llorca,et al.  Micromechanical modelling of deformation and failure in Ti-6al-4V/SiC composites , 2001 .

[36]  H. Biermann,et al.  FE investigation of the effect of particle distribution on the uniaxial stress–strain behaviour of particulate reinforced metal-matrix composites , 2001 .

[37]  Minoru Umemoto,et al.  Influence of alloy additions on production and properties of bulk cementite , 2001 .

[38]  P. Withers,et al.  Residual stress. Part 1 – Measurement techniques , 2001 .

[39]  P. Withers,et al.  A synchrotron X-ray study of a Ti/SiCf composite during in situ straining , 2001 .

[40]  D. Lesuer,et al.  Ancient and modern laminated composites — from the Great Pyramid of Gizeh to Y2K ☆ , 2000 .

[41]  Jeffrey Wadsworth,et al.  Ancient Blacksmiths, The Iron Age, Damascus Steels, and Modern Metallurgy , 2000 .

[42]  P. Withers,et al.  An investigation of the isothermal creep response of Al-based composites by neutron diffraction , 2000 .

[43]  Mark R. Daymond,et al.  Elastic phase-strain distribution in a particulate-reinforced metal-matrix composite deforming by slip or creep , 1999 .

[44]  David C. Dunand,et al.  Phase fraction, texture and strain evolution in superelastic NiTi and NiTi–TiC composites investigated by neutron diffraction , 1999 .

[45]  Xiaohu Zeng,et al.  Evolution of the residual stress state in a duplex stainless steel during loading , 1999 .

[46]  Mark R. Daymond,et al.  Comparison of residual strains measured by X-ray and neutron diffraction in a titanium (Ti-6Al-4V) matrix composite , 1999 .

[47]  P. Withers,et al.  A neutron diffraction study of load partitioning in continuous Ti/SiC composites , 1998 .

[48]  John D. Verhoeven,et al.  The key role of impurities in ancient damascus steel blades , 1998 .

[49]  J. Cohen,et al.  The effects of residual macrostresses and microstresses on fatigue crack propagation , 1998 .

[50]  J. Llorca,et al.  Prediction of the tensile stress-strain curve and ductility in Al/SiC composites , 1996 .

[51]  A. Needleman,et al.  Effects of reinforcement orientation on the tensile response of metal-matrix composites , 1995 .

[52]  H. Böhm,et al.  Micromechanical investigations of arrangement effects in particle reinforced metal matrix composites , 1994 .

[53]  A. H. Pendray,et al.  Studies of Damascus steel blades: Part 1—Experiments on reconstructed blades☆ , 1993 .

[54]  A. H. Pendray,et al.  Studies of Damascus steel blades: Part II—Destruction and reformation of the patterns , 1993 .

[55]  P. Withers,et al.  The analysis of internal strains measured by neutron diffraction in Al/SiC metal matrix composites , 1992 .

[56]  M. Bush.  An investigation of two-and three-dimensional models for predicting the elastic properties of particulate- and whisker-reinforced composite materials , 1992 .

[57]  R. Arsenault,et al.  Localized deformation of SiCAl composites , 1991 .

[58]  L. Pintschovius,et al.  Evaluation of Deformation Residual Stresses Caused by Uniaxial Plastic Strain of Ferritic and Ferritic-Austenitic Steels / Ermittlung der durch einachsige plastische Dehnung verursachten Verformungseigenspannungen in ferritischen und ferritisch-austenitischen Stählen , 1990 .

[59]  Subra Suresh,et al.  An experimental and numerical study of deformation in metal-ceramic composites , 1989 .

[60]  Merton C. Flemings,et al.  Solidification processing of metal-matrix composites , 1988 .

[61]  J. Cohen,et al.  Residual Stress: Measurement by Diffraction and Interpretation , 1987 .

[62]  P. S. Bate,et al.  Reversibility in the work hardening of spheroidised steels , 1986 .

[63]  D. J. Dever,et al.  Temperature dependence of the elastic constants in α‐iron single crystals: relationship to spin order and diffusion anomalies , 1972 .

[64]  Y. A. Konnan,et al.  Work hardening in a steel containing a coarse dispersion of cementite particles , 1964 .

[65]  W. Hume-rothery,et al.  The lattice expansion of iron , 1955, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[66]  G. Radnóczi,et al.  Acta Materialia , 2009 .

[67]  M. Fitzpatrick,et al.  Effect of cyclic plasticity on internal stresses in a metal matrix composite , 2006 .

[68]  Eric M. Taleff,et al.  Processing, structure, and properties of a rolled, ultrahigh-carbon steel plate exhibiting a damask pattern , 2001 .

[69]  D. Dunand,et al.  Synchrotron X-ray study of bulk lattice strains in externally loaded Cu-Mo composites , 2000 .

[70]  Siegfried Schmauder,et al.  Comput. Mater. Sci. , 1998 .

[71]  J. Roberts,et al.  Phase-stress partition during uniaxial tensile loading of a TiC-particulate-reinforced Al composite , 1997 .

[72]  S. Majumdar,et al.  Application of neutron diffraction to measure residual strains in various engineering composite materials , 1991 .

[73]  A. Levy,et al.  Tensile properties of short fiber-reinforced SiC/Al composites: Part II. Finite-element analysis , 1990 .

[74]  R. Cahn,et al.  Materials science and engineering , 2023, Nature.

[75]  F. Hauser,et al.  Deformation and Fracture Mechanics of Engineering Materials , 1976 .