Analysis of Pt/C electrode performance in a flowing-electrolyte alkaline fuel cell

Abstract We characterize the performance of Pt/C-based electrodes under alkaline conditions using a microfluidic H2/O2 fuel cell as an analytical platform. Both anodes and cathodes were investigated as a function of electrode preparation procedures (i.e., hot pressing, acclimatization) and fuel cell operating parameters (i.e., electrolyte composition) via chronoamperometric and electrochemical impedance analyses. X-ray micro-computed tomography was employed to link electrode structure to performance. In addition, the flowing electrolyte stream is used to study the effects of carbonates on individual electrode and overall fuel cell performance. Our studies provide direct evidence that the performance of hydrogen-fueled room-temperature alkaline fuel cells (AFCs) is limited by transport processes to and from the anode primarily due to water formation. Furthermore, the presence of carbonate species in the electrolyte appears to impact only anode performance whereas cathode performance remains unchanged.

[1]  T. Fuller,et al.  A Historical Perspective of Fuel Cell Technology in the 20th Century , 2002 .

[2]  Ned Djilali,et al.  An assessment of alkaline fuel cell technology , 2002 .

[3]  N. Djilali,et al.  Effect of compression on liquid water transport and microstructure of PEMFC gas diffusion layers , 2007 .

[4]  P. Kenis,et al.  Investigation of Pt, Pt3Co , and Pt3Co / Mo Cathodes for the ORR in a Microfluidic H2 / O2 Fuel Cell , 2010 .

[5]  Th. Freya,et al.  Effects of membrane electrode assembly preparation on the polymer electrolyte membrane fuel cell performance , 2004 .

[6]  Karl Kordesch,et al.  Advances, aging mechanism and lifetime in AFCs with circulating electrolytes , 2004 .

[7]  Emin Caglan Kumbur,et al.  Investigation of macro- and micro-porous layer interaction in polymer electrolyte fuel cells , 2008 .

[8]  R. Slade,et al.  Prospects for Alkaline Anion‐Exchange Membranes in Low Temperature Fuel Cells , 2005 .

[9]  Paul J. A. Kenis,et al.  Characterization of Limiting Factors in Laminar Flow-Based Membraneless Microfuel Cells , 2005 .

[10]  Emilio Sanchez-Cortezon,et al.  The evolution of the performance of alkaline fuel cells with circulating electrolyte , 2004 .

[11]  W. Mustain,et al.  Effect of CO2, HCO3− and CO3−2 on oxygen reduction in anion exchange membrane fuel cells , 2010 .

[12]  Robert C T Slade,et al.  Steady-state dc and impedance investigations of H2/O2 alkaline membrane fuel cells with commercial Pt/C, Ag/C, and Au/C cathodes. , 2006, The journal of physical chemistry. B.

[13]  Fikile R. Brushett,et al.  Carbonate resilience of flowing electrolyte-based alkaline fuel cells , 2011 .

[14]  F. Alcaide,et al.  Hydrogen Oxidation Reaction in a Pt-Catalyzed Gas Diffusion Electrode in Alkaline Medium , 2005 .

[15]  K. Kordesch,et al.  Alkaline methanol–air system , 2003 .

[16]  Stuart R. Stock,et al.  MicroComputed Tomography: Methodology and Applications , 2008 .

[17]  S. Srinivasan,et al.  Fuel Cells: From Fundamentals to Applications , 2006 .

[18]  W. Mustain,et al.  Hydrogen and Methanol Oxidation Reaction in Hydroxide and Carbonate Alkaline Media , 2011 .

[19]  M. Al-Garni,et al.  Preparation and evaluation of PTFE-bonded porous gas diffusion carbon electrodes used in phosphoric acid fuel cell applications , 1995 .

[20]  Manish Khandelwal,et al.  Investigation of the Impact of Interfacial Delamination on Polymer Electrolyte Fuel Cell Performance , 2008 .

[21]  Jamie P. Kizewski,et al.  A novel reference electrode for application in alkaline polymer electrolyte membrane fuel cells , 2010 .

[22]  R. Slade,et al.  An alkaline polymer electrochemical interface: a breakthrough in application of alkaline anion-exchange membranes in fuel cells. , 2006, Chemical communications.

[23]  Emilio Sanchez-Cortezon,et al.  Alkaline fuel cells: contemporary advancement and limitations , 2002 .

[24]  Robert C T Slade,et al.  A carbon dioxide tolerant aqueous-electrolyte-free anion-exchange membrane alkaline fuel cell. , 2008, ChemSusChem.

[25]  Lin Zhuang,et al.  Alkaline polymer electrolyte fuel cells completely free from noble metal catalysts , 2008, Proceedings of the National Academy of Sciences.

[26]  Paul J A Kenis,et al.  Microfluidic hydrogen fuel cell with a liquid electrolyte. , 2007, Langmuir : the ACS journal of surfaces and colloids.

[27]  S. Kounaves,et al.  Electrochemical approaches for chemical and biological analysis on Mars. , 2003, Chemphyschem : a European journal of chemical physics and physical chemistry.

[28]  Karl Kordesch,et al.  Intermittent use of a low-cost alkaline fuel cell-hybrid system for electric vehicles , 1999 .

[29]  H. Yanagi,et al.  Anion Exchange Membrane and Ionomer for Alkaline Membrane Fuel Cells (AMFCs) , 2008 .

[30]  Steven J. Thorpe,et al.  Performance of alkaline fuel cells: A possible future energy system? , 2006 .

[31]  Fikile R. Brushett,et al.  Alkaline Microfluidic Hydrogen-Oxygen Fuel Cell as a Cathode Characterization Platform , 2009 .

[32]  H. Gasteiger,et al.  Activity benchmarks and requirements for Pt, Pt-alloy, and non-Pt oxygen reduction catalysts for PEMFCs , 2005 .

[33]  L. Carrette,et al.  Fuel cells: principles, types, fuels, and applications. , 2000, Chemphyschem : a European journal of chemical physics and physical chemistry.

[34]  Andrzej Wieckowski,et al.  Electrocatalysis of oxygen reduction and small alcohol oxidation in alkaline media. , 2007, Physical chemistry chemical physics : PCCP.

[35]  Emin Caglan Kumbur,et al.  Characterization of interfacial morphology in polymer electrolyte fuel cells: Micro-porous layer and catalyst layer surfaces , 2010 .

[36]  L. Zhuang,et al.  A feasibility analysis for alkaline membrane direct methanol fuel cell: thermodynamic disadvantages versus kinetic advantages , 2003 .

[37]  E. Gonzalez,et al.  Effect of membrane characteristics and humidification conditions on the impedance response of polymer electrolyte fuel cells , 2001 .

[38]  EunAe Cho,et al.  Effects of MEA fabrication method on durability of polymer electrolyte membrane fuel cells , 2008 .

[39]  J. W. Van Zee,et al.  The effects of compression and gas diffusion layers on the performance of a PEM fuel cell , 1999 .

[40]  R. Borup.  Scientific Aspects of Polymer Electrolyte Fuel Cell Durability and Degradation , 2007 .

[41]  M. Schulze,et al.  3 – Alkaline fuel cells , 2008 .

[42]  Alexander Wokaun,et al.  Anisotropic, effective diffusivity of porous gas diffusion layer materials for PEFC , 2008 .

[43]  M. D. Rooij,et al.  Electrochemical Methods: Fundamentals and Applications , 2003 .

[44]  A. Kucernak,et al.  Studying the oxygen reduction and hydrogen oxidation reactions under realistic fuel cell conditions , 2008 .