Macroscopic and microscopic characteristics of a fuel spray impinged on the wall

An experimental study was performed to investigate the macroscopic behavior and atomization characteristics of a high-speed diesel spray impinged on the wall at various injection and impinging conditions. The development processes of sprays impinged on the wall were visualized using the spray visualization system composed of a Nd:YAG laser and an intensified charge-coupled device (ICCD) camera. The atomization characteristics of the impinged spray on the wall were also explored in terms of mean droplet diameter and velocity distributions by using a phase Doppler particle analyzer (PDPA) system. The results provide the effects of injection parameters, wall conditions, and the other various experimental conditions on the macroscopic behavior and atomization characteristics of the impinged sprays on the wall.

[1]  Noureddine Guerrassi,et al.  EXPERIMENTAL STUDY AND MODELING OF DIESEL SPRAY/WALL IMPINGEMENT , 1996 .

[2]  Hideyuki Tsunemoto,et al.  Fuel Spray Behavior in a Small DI Diesel Engine: Effect of Combustion Chamber Geometry , 2000 .

[3]  Rolf D. Reitz,et al.  Modeling Engine Spray/Wall Impingement , 1988 .

[4]  Koji Yamane,et al.  Fuel Injection Rate Shaping and Its Effect on Exhaust Emissions in a Direct-Injection Diesel Engine Using a Spool Acceleration Type Injection System , 1997 .

[5]  C. Arcoumanis,et al.  Flow and Heat Transfer Characteristics of Impinging Diesel Sprays Under Cross-Flow Conditions , 1995 .

[6]  Rolf D. Reitz,et al.  Measurement of the Effect of Injection Rate and Split Injections on Diesel Engine Soot and NOx Emissions , 1994 .

[7]  Erik Schünemann,et al.  Droplet Size and Velocity Measurements for the Characterization of a DI-Diesel Spray Impinging on a Flat Wall , 1998 .

[8]  Christopher J. Rutland,et al.  MODELING FUEL FILM FORMATION AND WALL INTERACTION IN DIESEL ENGINES , 1996 .

[9]  Jiro Senda,et al.  CHARACTERISTICS OF A DIESEL SPRAY IMPINGING ON A FLAT WALL , 1989 .

[10]  Seong Hyuk Lee,et al.  Comparison of Spray/Wall Impingement Models with Experimental Data , 2000 .

[11]  Zoran Filipi,et al.  A Methodology for Cycle-By-Cycle Transient Heat Release Analysis in a Turbocharged Direct Injection Diesel Engine , 2000 .

[12]  Wilhelm Bosch,et al.  The Fuel Rate Indicator: A New Measuring Instrument For Display of the Characteristics of Individual Injection , 1966 .

[13]  A. Gosman,et al.  Development of Methodology for Spray Impingement Simulation , 1995 .

[15]  W. Lee.  FINITE-ELEMENT ANALYSIS OF HEAT CONDUCTION PROBLEMS WITH IRREGULAR REGION BOUNDARY USING MULTILEVEL TECHNIQUES , 2001 .

[16]  Kyungnam Ko,et al.  DIESEL SPRAY IMPINGING ON A FLAT WALL. PART II: VOLUME AND AVERAGE AIR-FUEL RATIO OF AN IMPINGEMENT DIESEL SPRAY , 2002 .

[17]  Kyungnam Ko,et al.  Diesel Spray impinging on a Flat Wall, Part I : Characteristics of Adhered Fuel Film in an Impingement Diesel Spray , 2002 .

[18]  Lars Reichelt,et al.  Analysis of Spray/Wall Interaction Under Diesel Engine Conditions , 2000 .