Quantitative analysis of cement powder by laser induced breakdown spectroscopy

Determination of elemental composition of cement powder plays an important role in the cement and construction industries. In the present paper, Laser induced breakdown spectroscopy (LIBS) is used for measuring the concentration of cement ingredient. Cement powder samples are pressed into pellets. Laser pulses are focused on the surface of pellets. A microplasma is formed in the front of samples. The plasma emission contains information about the elemental composition of the samples. By assumption of local thermodynamic equilibrium (LTE) and using several standard cement samples, a calibration curve is prepared for each element. The major and minor elements of cement such as Ca, Si, K, Mg, Al, Na, Ti, Mn and Sr are qualitatively and quantitatively determined. For verification of LTE conditions, plasma parameters such as plasma electron temperature and electron density are computed. According to the obtained results, the LIBS technique could be a suitable method for determination of elemental composition in the cement production industries.

[1]  S. Maurice,et al.  Comparative study of different methodologies for quantitative rock analysis by Laser-Induced Breakdown Spectroscopy in a simulated Martian atmosphere , 2006 .

[2]  Walid Tawfik Y. Mohamed.  Improved LIBS limit of detection of Be, Mg, Si, Mn, Fe and Cu in aluminum alloy samples using a portable Echelle spectrometer with ICCD camera , 2008 .

[3]  M. Khalaji,et al.  Laser ablation of preheated copper samples , 2008 .

[4]  M. Harith,et al.  Panoramic laser-induced breakdown spectrometry of water , 2002 .

[5]  Daniel L'Hermite,et al.  Main parameters influencing the double-pulse laser-induced breakdown spectroscopy in the collinear beam geometry , 2005 .

[6]  Atoosa Sadat Arabanian,et al.  Polarization resolved laser induced breakdown spectroscopy by single shot nanosecond pulsed Nd:YAG laser , 2010 .

[7]  G. Fajardo,et al.  Corrosion of steel rebar embedded in natural pozzolan based mortars exposed to chlorides , 2009 .

[8]  J. G. Cabrera,et al.  The effect of mineral admixtures on the properties of high-performance concrete , 2000 .

[9]  Leon J. Radziemski,et al.  Handbook of Laser-Induced Breakdown Spectroscopy , 2006 .

[10]  R. Noll,et al.  Laser-induced breakdown spectrometry — applications for production control and quality assurance in the steel industry , 2001 .

[11]  F. J. Fortes,et al.  In Situ Analytical Assessment and Chemical Imaging of Historical Buildings Using a Man-Portable Laser System , 2007, Applied spectroscopy.

[12]  Jagdish P. Singh,et al.  Laser-induced breakdown spectroscopy , 2007 .

[13]  M. Khalaji,et al.  Determination of elemental composition of cement powder by Spark Induced Breakdown Spectroscopy , 2010 .

[14]  G. Batis,et al.  An analysis of the properties of Portland limestone cements and concrete , 2002 .

[15]  A. Giacomo,et al.  Laser-induced plasma expansion: theoretical and experimental aspects , 2004 .

[16]  Yu-Pu Song,et al.  Factors affecting corrosion and approaches for improving durability of ocean reinforced concrete structures , 2004 .

[17]  J. Heitz,et al.  Laser-induced breakdown spectroscopy of iron oxide powder , 2009 .

[18]  O. Al-Amoudi,et al.  Determination of Chloride Content in Different Types of Cement Using Laser-Induced Breakdown Spectroscopy , 2009 .

[19]  Fabio Ferrario,et al.  Quantitative analysis of aluminium alloys by low-energy, high-repetition rate laser-induced breakdown spectroscopy , 2006 .

[20]  J. A. Aguilera,et al.  Characterization of laser-induced plasmas by emission spectroscopy with curve-of-growth measurements. Part II: Effect of the focusing distance and the pulse energy , 2008 .

[21]  Qinwu Xu,et al.  Micromechanical analysis of polyacrylamide-modified concrete for improving strengths , 2008 .

[22]  L. Blevins,et al.  Laser-induced breakdown spectroscopy of alkali metals in high-temperature gas. , 2006, Applied optics.

[23]  Jidong Lu,et al.  Effects of experimental parameters on elemental analysis of coal by laser-induced breakdown spectroscopy , 2009 .

[24]  Jez Willian Batista Braga,et al.  Evaluation of laser induced breakdown spectroscopy for cadmium determination in soils , 2009 .

[25]  J Sousa Coutinho,et al.  The combined benefits of CPF and RHA in improving the durability of concrete structures , 2003 .

[26]  J. Yun,et al.  Laser-Induced Breakdown Spectroscopy for the On-Line Multielement Analysis of Highly Radioactive Glass Melt Simulants. Part II: Analyses of Molten Glass Samples , 2002 .

[27]  Pierre-Claude Aitcin,et al.  Cements of yesterday and today Concrete of tomorrow , 2000 .

[28]  L. Aldridge.  Accuracy and precision of an X-ray diffraction method for analysing portland cements , 1982 .

[29]  E. Posada,et al.  Free-running and Q:Switched LIBS measurements during the laser ablation of Prickle Pears spines , 2009 .

[30]  S. Aggarwal,et al.  Laser-induced breakdown spectroscopy for simultaneous determination of Sm, Eu and Gd in aqueous solution. , 2008, Talanta.

[31]  P. Parvin,et al.  Determination of gold fineness by laser induced breakdown spectroscopy with the simultaneous use of CW-CO2 and Q-SW Nd:YAG lasers , 2010 .