Evolution of microstructure and mechanical properties of PIP-C/SiC composites after high-temperature oxidation

[1]  A. Toland,et al.  Carbon , 2018, Field to Palette.

[2]  Rongjun Liu,et al.  The degradation behavior of UHTCs based coatings coated PIP-C/SiC composites in thermal cycling environment , 2016 .

[3]  Yuheng Wang,et al.  High-temperature behavior of Al-doped polymer-derived SiAlOC glasses in air environment , 2014 .

[4]  H. Hu,et al.  Thermal shock properties of 3D-C/SiC composites prepared via polymer infiltration pyrolysis (PIP) , 2014 .

[5]  Haifeng Cheng,et al.  Effects of sintering temperature on mechanical properties of 3D mullite fiber (ALF FB3) reinforced mullite composites , 2013 .

[6]  D. Han,et al.  Thermal Shock Properties of a 2D-C/SiC Composite Prepared by Chemical Vapor Infiltration , 2013, Journal of Materials Engineering and Performance.

[7]  Song Wang,et al.  Microstructures and mechanical properties of CVD-SiC coated PIP-C/SiC composites under high temperature , 2012 .

[8]  Yan Ma,et al.  Effects of 1600 °C annealing atmosphere on the microstructures and mechanical properties of C/SiC composites fabricated by precursor infiltration and pyrolysis , 2012 .

[9]  H. Hu,et al.  Preparation and mechanical properties of C/SiC nuts and bolts , 2012 .

[10]  F. Audubert,et al.  Chemical degradation of SiC/SiC composite for the cladding of gas-cooled fast reactor in case of severe accident scenarios , 2012 .

[11]  Song Wang,et al.  Oxidation behavior of oxidation protective coatings for PIP–C/SiC composites at 1500 °C , 2012 .

[12]  Lai-fei Cheng,et al.  Fracture behaviors and mechanism of 2D C/SiC-BCx composite under tensile load , 2011 .

[13]  A. Luz,et al.  Hot elastic modulus of Al2O3–SiC–SiO2–C castables , 2011 .

[14]  Zhaohui Chen,et al.  In situ growth of a carbon interphase between carbon fibres and a polycarbosilane-derived silicon carbide matrix , 2011 .

[15]  Song Wang,et al.  Effects of high-temperature annealing on the microstructures and mechanical properties of Cf/SiC composites using polycarbosilane , 2011 .

[16]  Zhaofeng Chen,et al.  Effects of ablation at different regions in three-dimensional orthogonal C/SiC composites ablated by oxyacetylene torch at 1800 °C , 2009 .

[17]  H. Hu,et al.  Effects of polycarbosilane infiltration processes on the microstructure and mechanical properties of 3D-Cf/SiC composites , 2007 .

[18]  Q. Ma,et al.  Effects of pyrolysis processes on the microstructures and mechanical properties of Cf/SiC composites using polycarbosilane , 2005 .

[19]  S. Guo,et al.  Effect of matrix modification on tensile mechanical behavior of Tyranno® Si-Ti-C-O fiber-reinforced SiC matrix minicomposite at room and elevated temperatures , 2004 .

[20]  R. Naslain.  Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview , 2004 .

[21]  Jacques Lamon,et al.  The concept of a strong interface applied to SiC/SiC composites with a BN interphase , 2000 .

[22]  Yoshiharu Mutoh,et al.  Monotonic tension, fatigue and creep behavior of SiC-fiber-reinforced SiC-matrix composites: a review , 1999 .

[23]  Hui‐Ming Cheng,et al.  The properties of carbon fibre/SiC composites fabricated through impregnation and pyrolysis of polycarbosilane , 1999 .

[24]  Hui‐Ming Cheng,et al.  A TEM study of microstructure of carbon fiber/polycarbosilane-derived SiC composites , 1999 .

[25]  R. Naslain,et al.  The design of the fibre-matrix interfacial zone in ceramic matrix composites , 1998 .

[26]  Hongyu Wang,et al.  Thermal shock behavior of fiber-reinforced ceramic matrix composites☆ , 1995 .

[27]  J. Cawley,et al.  Oxidation of carbon fibers and films in ceramic matrix composites: A weak link process , 1995 .