Micromechanical response of aggregate skeleton within asphalt mixture based on virtual simulation of wheel tracking test

Abstract Based on the discrete element method (DEM), this study conducted the virtual simulation of wheel tracking tests to predict the rutting deformation of asphalt mixtures and analyzed the micromechanical response of aggregate skeletons within the asphalt mixture during the tests. Considering the irregular shape and elastic property of coarse aggregates, the continuum and viscoelastic property of the asphalt mastic and the random distribution of air voids in the asphalt mixture, a three-dimensional micromechanical DEM model for asphalt mixture was constructed by particle flow code in three dimensions (PFC3D). A two-dimensional virtual asphalt mixture sample was generated based on the central cross-section of the three-dimensional virtual asphalt mixture sample. A virtual wheel tracking test was built by PFC3D and verified by laboratory wheel tracking tests to predict the rutting behavior of the asphalt mixture. During the virtual wheel tracking test, the movements of the coarse aggregates, including their translation and rotation, were revealed, and the contact condition and contact forces within the aggregate skeleton were analyzed. The micromechanical responses of the aggregate skeleton demonstrate how the aggregate skeleton in asphalt mixtures bears the load and describes the potential reasons why rutting deformation forms from the micromechanical view.

[1]  Yu Liu,et al.  Viscoelastic Model for Discrete Element Simulation of Asphalt Mixtures , 2009 .

[2]  Liang Li,et al.  Virtual testing of asphalt mixture with two-dimensional and three-dimensional random aggregate structures , 2017 .

[3]  Ching S. Chang,et al.  Micromechanical modeling for behavior of cementitious granular materials , 1999 .

[4]  R. Lytton,et al.  Characterization of viscoplastic yielding of asphalt concrete , 2013 .

[5]  Xiaoming Huang,et al.  Micromechanical modeling of asphalt concrete fracture using a user-defined three-dimensional discrete element method , 2012 .

[6]  Tom Scullion,et al.  Hot-Mix Asphalt Permanent Deformation Evaluated by Hamburg Wheel Tracking, Dynamic Modulus, and Repeated Load Tests , 2012 .

[7]  Robert L. Lytton,et al.  Weak Form Equation–Based Finite-Element Modeling of Viscoelastic Asphalt Mixtures , 2016 .

[8]  P. Cundall,et al.  A discrete numerical model for granular assemblies , 1979 .

[9]  Yong-Rak Kim,et al.  Experimental Testing and Finite Element Modeling to Evaluate Effects of Aggregate Angularity on Bituminous Mixture Performance , 2010 .

[10]  Bouzid Choubane,et al.  Suitability of Asphalt Pavement Analyzer for Predicting Pavement Rutting , 2000 .

[12]  Yongli Zhao,et al.  Design method and performance for large stone porous asphalt mixtures , 2010 .

[13]  Zhanping You,et al.  Visualization and Simulation of Asphalt Concrete with Randomly Generated Three-Dimensional Models , 2009 .

[14]  Tao Xu,et al.  Investigation into causes of in-place rutting in asphalt pavement , 2012 .

[15]  Jiu-peng Zhang,et al.  Development and Validation of Viscoelastic-Damage Model for Three-Phase Permanent Deformation of Dense Asphalt Mixture , 2012 .

[16]  Hao Wang,et al.  Micromechanical analysis of asphalt mixture fracture with adhesive and cohesive failure , 2014 .

[17]  Valeria Vignali,et al.  Modeling the DSR complex shear modulus of asphalt binder using 3D discrete element approach , 2014 .

[18]  Robert L. Lytton,et al.  Mechanistic modeling of fracture in asphalt mixtures under compressive loading , 2013 .

[19]  Jiaqi Chen,et al.  Evaluation of thermal conductivity of asphalt concrete with heterogeneous microstructure , 2015 .

[20]  Joe W Button,et al.  Evaluation of Simple Performance Tests on Hot-Mix Asphalt Mixtures from South Central United States , 2004 .

[21]  Ala R. Abbas,et al.  Micromechanical Modeling of the Viscoelastic Behavior of Asphalt Mixtures Using the Discrete-Element Method , 2007 .

[22]  P. Cundall.  A computer model for simulating progressive, large-scale movements in blocky rock systems , 1971 .

[23]  Subasish Das,et al.  Imaged-based discrete element modeling of hot mix asphalt mixtures , 2015 .

[24]  W. Buttlar,et al.  Discrete fracture modeling of asphalt concrete , 2009 .

[25]  J. Meegoda,et al.  Micromechanical Simulation of Hot Mix Asphalt , 1997 .

[26]  Robert L. Lytton,et al.  Characterizing Permanent Deformation and Fracture of Asphalt Mixtures by Using Compressive Dynamic Modulus Tests , 2012 .

[27]  R. Lytton,et al.  Crack Initiation in Asphalt Mixtures under External Compressive Loads , 2014 .

[28]  Mohammad Jamal Khattak,et al.  Micromechanical Modeling of Hot-Mix Asphalt Mixtures by Imaging and Discrete Element Methods , 2009 .

[29]  Z. M. Wang,et al.  Mesoscopic study of concrete I: generation of random aggregate structure and finite element mesh , 1999 .

[30]  Hao Wang,et al.  Evaluation of permanent deformation of asphalt mixtures using different laboratory performance tests , 2014 .

[31]  Mohd Rosli Hainin,et al.  Rutting evaluation of dense graded hot mix asphalt mixture , 2011 .

[32]  William G. Buttlar,et al.  Discrete Element Modeling of Asphalt Concrete: Microfabric Approach , 2001 .

[33]  Yongli Zhao,et al.  Algorithms for Generating Three-Dimensional Aggregates and Asphalt Mixture Samples by the Discrete-Element Method , 2013 .