Development of a prototype for multi-function smart window by integrating photovoltaic blinds and ventilation system

Abstract To address the energy consumption problem in the building sector, this study sought to develop a prototype of the multi-function smart window as a combination of the photovoltaic (PV) blinds and the ventilation system by considering two perspectives: (i) design of the multi-function smart window; and (ii) operation strategy for the multi-function smart window. The main findings can be summarized as follows. First, a comprehensive performance analysis of the multi-function smart window according to the application location of the ventilation system and the PV cell types was conducted to determine the optimal configuration of the multi-function smart window. Second, the hardware prototype of the multi-function smart window was implemented considering the PV cell type, PV tracker type, ventilation type, and filter. Finally, this study developed a software prototype that can monitor and control the multi-function smart window in real time based on the NI LabVIEW software program. Through the application of a novel building envelope system developed based on this study, it is expected that zero-energy buildings can be realized and buildings’ indoor environmental quality can be improved.

[1]  Mahmoud Abdelhamid,et al.  Evaluation of On-Board Photovoltaic Modules Options for Electric Vehicles , 2014, IEEE Journal of Photovoltaics.

[2]  Taehoon Hong,et al.  A Preliminary Study on the 2-axis Hybrid Solar Tracking Method for the Smart Photovoltaic Blind☆ , 2016 .

[3]  Taehoon Hong,et al.  An economic impact analysis of residential progressive electricity tariffs in implementing the building-integrated photovoltaic blind using an advanced finite element model , 2017 .

[4]  Lin Lu,et al.  Investigation on the annual thermal performance of a photovoltaic wall mounted on a multi-layer façade , 2013 .

[5]  Seung Hyun Cha,et al.  An integrated model for estimating the techno-economic performance of the distributed solar generation system on building façades: Focused on energy demand and supply , 2018 .

[6]  Jimin Kim,et al.  A Prototype Design and Development of the Smart Photovoltaic System Blind Considering the Photovoltaic Panel, Tracking System, and Monitoring System , 2017 .

[7]  Hongxing Yang,et al.  Performance of ventilated double-sided PV façade compared with conventional clear glass façade , 2013 .

[8]  Hongxing Yang,et al.  Study on thermal performance of semi-transparent building-integrated photovoltaic glazings , 2008 .

[9]  Yen-Chieh Huang,et al.  Development of Building Integrated Photovoltaic (BIPV) System with PV Ceramic Tile and its Application for Building Façade , 2014 .

[10]  P. J. Irga,et al.  Indoor air pollutants in occupational buildings in a sub-tropical climate: Comparison among ventilation types , 2016 .

[11]  E. Dunlop,et al.  Comparison of potential solar electricity output from fixed‐inclined and two‐axis tracking photovoltaic modules in Europe , 2008 .

[12]  G. Evola,et al.  Computational analysis of wind driven natural ventilation in buildings , 2006 .

[13]  Giuseppe Marco Tina,et al.  Photovoltaic Glazing: Analysis of Thermal Behavior and Indoor Comfort , 2013 .

[14]  Cristina Silvia Polo Lopez,et al.  Comparison Assessment of BIPV Façade Semi-transparent Modules: Further Insights on Human Comfort Conditions , 2013 .

[15]  Kang Li,et al.  Improving Solar PV System Efficiency Using One-Axis 3-Position Sun Tracking , 2013 .

[16]  Andrew Quinn,et al.  A Comparison of CFD and Full-scale Measurements for Analysis of Natural Ventilation , 2006 .

[17]  Hyo Seon Park,et al.  A finite element model for estimating the techno-economic performance of the building-integrated photovoltaic blind , 2016 .

[18]  Karen Abrinia,et al.  A review of principle and sun-tracking methods for maximizing solar systems output , 2009 .

[19]  Saffa Riffat,et al.  CFD modelling of air flow and thermal performance of an atrium integrated with photovoltaics , 2004 .

[20]  Po-Chun Chen,et al.  Heat insulation solar glass and application on energy efficiency buildings , 2014 .

[21]  W. Warta,et al.  Solar cell efficiency tables (version 50) , 2017 .

[22]  Jeong Tai Kim,et al.  Theoretical analysis of the blinds integrated photovoltaic modules , 2012 .

[23]  David Infield,et al.  Thermal modelling of a building with an integrated ventilated PV façade , 2003 .

[24]  G. Durga Sukumar,et al.  A review on PV cells and nanocomposite‐coated PV systems , 2018 .

[25]  K. F. Fong,et al.  CFD study on effect of the air supply location on the performance of the displacement ventilation system , 2005 .

[26]  U. Borup,et al.  Transformerless Photovoltaic Inverters Connected to the Grid , 2007, APEC 07 - Twenty-Second Annual IEEE Applied Power Electronics Conference and Exposition.

[27]  Andreas K. Athienitis,et al.  Experimental investigation of a two-inlet air-based building integrated photovoltaic/thermal (BIPV/T) system , 2015 .

[28]  Seung-Ho Yoo,et al.  Efficiency characteristic of building integrated photovoltaics as a shading device , 2002 .

[29]  Kwangbok Jeong,et al.  Nonlinearity analysis of the shading effect on the technical–economic performance of the building-integrated photovoltaic blind , 2017 .

[30]  Jimin Kim,et al.  An integrated multi-objective optimization model for determining the optimal solution in implementing the rooftop photovoltaic system , 2016 .

[31]  Taehoon Hong,et al.  A preliminary study for determining photovoltaic panel for a smart photovoltaic blind considering usability and constructability issues , 2016 .

[32]  Jun-Ki Choi,et al.  Improving the prediction performance of the finite element model for estimating the technical performance of the distributed generation of solar power system in a building façade , 2018 .

[33]  Chunjiang Zhao,et al.  Environmental assessments and economic performance of BAPV and BIPV systems in Shanghai , 2016 .

[34]  Charles R. Sullivan,et al.  Decrease in Photovoltaic Power Output from Ripple: Simple General Calculation and the Effect of Partial Shading , 2013 .

[35]  H. Manz,et al.  Climatic potential for passive cooling of buildings by night-time ventilation in Europe , 2007 .