Taxonomies of SOFC material and manufacturing alternatives

[1]  F. Tietz Materials Selection for Solid Oxide Fuel Cells , 2003 .

[2]  J. Beuth,et al.  FUNDAMENTAL STUDIES OF THE DURABILITY OF MATERIALS FOR INTERCONNECTS IN SOLID OXIDE FUEL CELLS , 2003 .

[3]  M. Naito,et al.  Synthesis of NiO–YSZ composite particles for an electrode of solid oxide fuel cells by spray pyrolysis , 2003 .

[4]  S. Deevi,et al.  Opportunity of metallic interconnects for solid oxide fuel cells: a status on contact resistance , 2003 .

[5]  Bin Zhu,et al.  Innovative low temperature SOFCs and advanced materials , 2003 .

[6]  J. Sfeir LaCrO3-based anodes: stability considerations , 2003 .

[7]  Y. Xiong,et al.  Stability of Fe–Cr alloy interconnects under CH4–H2O atmosphere for SOFCs , 2003 .

[8]  S. Deevi,et al.  Development of interconnect materials for solid oxide fuel cells , 2003 .

[9]  M. Mori,et al.  Evaluation of Ni and Ti-doped Y2O3 stabilized ZrO2 cermet as an anode in high-temperature solid oxide fuel cells , 2003 .

[10]  O. Sbaizero,et al.  YSZ layers by pulsed-MOCVD on solid oxide fuel cell electrodes , 2003 .

[11]  Hubert A. Gasteiger,et al.  Handbook of fuel cells : fundamentals technology and applications , 2003 .

[12]  Masanori Hirano,et al.  Effect of Bi2O3 additives in Sc stabilized zirconia electrolyte on a stability of crystal phase and electrolyte properties , 2003 .

[13]  S. Haile Materials for Fuel Cells , 2003 .

[14]  W. L. Worrell,et al.  SOFCs for Direct Oxidation of Hydrocarbon Fuels with Samaria-Doped Ceria Electrolyte , 2003 .

[15]  P. C. Rieke,et al.  Electrochemical properties of lanthanum strontium aluminum ferrites for the oxygen reduction reaction , 2003 .

[16]  K. Fung,et al.  La1-xSrxCuO2.5-δ as new cathode materials for intermediate temperature solid oxide fuel cells , 2003 .

[17]  Tim Peters,et al.  Development Of A Solid Oxide Fuel Cell Stack By Delphi And Battelle , 2003 .

[18]  C. Yamagata,et al.  Synthesis of ZrO2-Based Ceramics for Applications in SOFC , 2003 .

[19]  S. Singhal Solid oxide fuel cells for stationary, mobile, and military applications , 2002 .

[20]  Y. Sakurai,et al.  Properties of La1−ySryNi1−xFexO3 as a cathode material for a low-temperature operating SOFC , 2002 .

[21]  N. Sakai,et al.  Comparison between La0.9Ba0.1Ga0.8Mg0.2O2.85 and La0.9Sr0.1Ga0.8Mg0.2O2.85 as SOFCs electrolytes , 2002 .

[22]  A. Virkar,et al.  Performance of Solid Oxide Fuel Cells with LSGM-LSM Composite Cathodes , 2002 .

[23]  A. Boudghene Stambouli,et al.  Solid oxide fuel cells (SOFCs): a review of an environmentally clean and efficient source of energy , 2002 .

[24]  Gregor Hoogers,et al.  Fuel Cell Technology Handbook , 2002 .

[25]  Wenzheng Li,et al.  Fabrication and Testing of a Doped Lanthanum Gallate Electrolyte Thin-Film Solid Oxide Fuel Cell , 2002 .

[26]  Reinout Heijungs,et al.  The computational structure of life cycle assessment , 2002 .

[27]  J. Stevenson,et al.  Thermal, Electrical, and Electrocatalytical Properties of Lanthanum-Doped Strontium Titanate , 2002 .

[28]  T. Ishihara,et al.  La-Doped BaCoO3 as a Cathode for Intermediate Temperature Solid Oxide Fuel Cells Using a LaGaO3 Base Electrolyte , 2002 .

[29]  L. Singheiser,et al.  Chemical Interactions Between Aluminosilicate Base Sealants and the Components on the Anode Side of Solid Oxide Fuel Cells , 2002 .

[30]  Jonghee Han,et al.  Performance of anode-supported solid oxide fuel cell with La0.85Sr0.15MnO3 cathode modified by sol–gel coating technique , 2002 .

[31]  M. J. Day,et al.  Functionally graded composite cathodes for solid oxide fuel cells , 2002 .

[32]  T. He,et al.  Electrical properties of thin-walled 8 mol% yttria-stabilized zirconia electrolyte tubes prepared by an improved slip casting method , 2002 .

[33]  M. Mogensen,et al.  Preparation and Characterization of Copper/Yttria Titania Zirconia Cermets for Use as Possible Solid Oxide Fuel Cell Anodes , 2001 .

[34]  B. Steele,et al.  Materials for fuel-cell technologies , 2001, Nature.

[35]  Nigel P. Brandon,et al.  The environmental impact of manufacturing planar and tubular solid oxide fuel cells , 2001 .

[36]  Kazutoshi Murata,et al.  Fabrication and Evaluation of Electrode Supported Planar SOFC III. Stack Performance , 2001 .

[37]  N. Sammes,et al.  Fabrication of tubular electrolytes for solid oxide fuel cells using strontium- and magnesium-doped LaGaO3 materials , 2001 .

[38]  S. Badwal Stability of solid oxide fuel cell components , 2001 .

[39]  Fanglin Chen,et al.  Reduced-Temperature Solid Oxide Fuel Cells Fabricated by Screen Printing , 2001 .

[40]  P. Zhou,et al.  Cost-effective yttrium doped ceria-based composite ceramic materials for intermediate temperature solid oxide fuel cell applications , 2001 .

[41]  A. Kovalevsky,et al.  Ceria-based materials for solid oxide fuel cells , 2001 .

[42]  A. Gupta,et al.  Gadolinia-doped ceria and yttria stabilized zirconia interfaces: regarding their application for SOFC technology ☆ , 2000 .

[43]  Sukhvinder P.S. Badwal,et al.  Scandia-zirconia electrolytes for intermediate temperature solid oxide fuel cell operation , 2000 .

[44]  S. Singhal Advances in solid oxide fuel cell technology , 2000 .

[45]  K. Eguchi,et al.  Process of solid state reaction between doped ceria and zirconia , 2000 .

[46]  Jianhua Yang,et al.  Characteristics of lanthanum strontium chromite prepared by glycine nitrate process , 2000 .

[47]  D. Stöver,et al.  Chemical compatibility of alternative perovskite oxide SOFC cathodes with doped lanthanum gallate solid electrolyte , 2000 .

[48]  Raymond J. Gorte,et al.  Anodes for Direct Oxidation of Dry Hydrocarbons in a Solid‐Oxide Fuel Cell , 2000 .

[49]  E. Ivers-Tiffée,et al.  Stability at La0.6Sr0.4CoO3-d cathode/La0.8Sr0.2Ga0.8Mg0.2O2.8 electrolyte interface under current flow for solid oxide fuel cells , 2000 .

[50]  Peter J. G. Pearson,et al.  Environmental emissions of SOFC and SPFC system manufacture and disposal , 2000 .

[51]  D. Perednis,et al.  Fabrication of thin electrolytes for second-generation solid oxide fuel cells , 2000 .

[52]  John B. Goodenough,et al.  A solid oxide fuel cell based on Sr- And Mg-doped LaGaO3 electrolyte: The role of a rare-earth oxide buffer , 2000 .

[53]  O. Yamamoto Solid oxide fuel cells: fundamental aspects and prospects , 2000 .

[54]  Toru Inagaki,et al.  High-performance electrodes for reduced temperature solid oxide fuel cells with doped lanthanum gallate electrolyte , 2000 .

[55]  Toru Inagaki,et al.  High performance electrodes for reduced temperature solid oxide fuel cells with doped lanthanum gallate electrolyte: I. Ni–SDC cermet anode , 2000 .

[56]  John W. Cotton,et al.  Fuel reforming and electrical performance studies in intermediate temperature ceria-gadolinia-based SOFCs , 2000 .

[57]  João A. Labrincha,et al.  Cathode materials for intermediate temperature SOFCs , 2000 .

[58]  Nigel P. Brandon,et al.  Environmental Evaluation of Thick Film Ceramic Fabrication Techniques for Solid Oxide Fuel Cells , 2000 .

[59]  Nigel M. Sammes,et al.  Fabrication and properties of Ce0.8Gd0.2O1.9 electrolyte-based tubular solid oxide fuel cells , 1999 .

[60]  W. L. Worrell,et al.  A Novel Method for Preparing Anode Cermets for Solid Oxide Fuel Cells , 1999 .

[61]  Toru Inagaki,et al.  Ni-SDC cermet anode for medium-temperature solid oxide fuel cell with lanthanum gallate electrolyte , 1999 .

[62]  Yoji Sakurai,et al.  An investigation of LaNi1−xFexO3 as a cathode material for solid oxide fuel cells , 1999 .

[63]  C. Bagger,et al.  A solid oxide fuel cell with a gadolinia-doped ceria anode: preparation and performance , 1999 .

[64]  M. B. Phillipps,et al.  Gd1 − x A x Mn1 − y Co y O 3 − δ ( A = Sr , Ca ) as a Cathode for Solid‐Oxide Fuel Cells , 1999 .

[65]  Toru Inagaki,et al.  Solid Oxide Fuel Cells with Doped Lanthanum Gallate Electrolyte and LaSrCoO3 Cathode, and Ni‐Samaria‐Doped Ceria Cermet Anode , 1999 .

[66]  J. D. Carter,et al.  Development of Solid‐Oxide Fuel Cells That Operate at 500°C , 1999 .

[67]  H. Inaba,et al.  Electrochemical Oxidation in a CH 4 ‐ H 2 O System at the Interface of a Pt Electrode and Y 2 O 3‐Stabilized ZrO2 Electrolyte I. Determination of the Predominant Reaction Process , 1998 .

[68]  Jong Chen,et al.  Metal-organic vapor deposition of YSZ electrolyte layers for solid oxide fuel cell applications , 1997 .

[69]  D. Stolten,et al.  Materials, interfaces and production techniques for planar solid oxide fuel cells , 1996 .

[70]  G. Balazs ac impedance studies of rare earth oxide doped ceria , 1995 .

[71]  M. Ippommatsu,et al.  High power density solid oxide electrolyte fuel cells using Ru/Y2O3 stabilized zirconia cermet anodes , 1993 .

[72]  S. Gottesfeld,et al.  Thin-film fuel cells , 1990, Nature.

[73]  S. Singhal,et al.  Advanced anodes for high-temperature fuel cells , 2004, Nature materials.

[74]  T. He,et al.  Electrical properties and applications of (ZrO2)(0.92)(Y2O3)(0.08) electrolyte thin wall tubes prepared by improved slip casting method , 2003 .

[75]  H. Woodward A Performance Based, Multi-process Cost Model For Solid Oxide Fuel Cells , 2003 .

[76]  Jeffry W. Stevenson,et al.  Development of lanthanum ferrite SOFC cathodes , 2003 .

[77]  K. Kendall,et al.  High temperature solid oxide fuel cells : fundamentals, design and applicatons , 2003 .

[78]  I. Yasuda Development of Anode-Supported SOFC for Reduced-Temperature Operation , 2001 .

[79]  A. Pham Demonstration of High Power Density Planar Solid Oxide Fuel Cell Stacks , 2001 .

[80]  J. Akikusa Development of Low-Temperature Operation SOFC , 2001 .

[81]  E. Ivers-Tiffée,et al.  Materials and technologies for SOFC-components , 2001 .

[82]  M. Kuroishi Development of Tubular Type SOFC Module by Wet Process , 2001 .

[83]  K. Murata Preparation of La(Sr)Ga(Mg)O3 Electrolyte Film by Tape Casting Method , 2001 .

[84]  J. Kilner Zero Emission Power Generation Using an all Perovskite Fuel Cell , 2001 .

[85]  S. Wang A Study of Low Temperature Cathodes on SSZ Electrolyte , 2001 .

[86]  Michael B. Joerger Catalytically Active Anodes for SOFC , 2001 .

[87]  K. Ukai Current Status of SOFC Development Using Scandia Doped Zirconia , 2001 .

[88]  T. Ishihara Ba(La)CoO3 Cathode for Intermediate Temperature Operating Solid Oxide Fuel Cell Using LaGaO3 Based Electrolyte , 2001 .

[89]  G. Rietveld Status of SOFC Component Development at ECN , 2001 .

[90]  James Larminie,et al.  Fuel Cell Systems Explained , 2000 .

[91]  Namjin Kim Effect of Codopant Addition on Electrical Properties of Gadolinia-Doped Ceria Electrolyte , 1999 .

[92]  T. Ishihara,et al.  Transition Metal D$ LaGaO 3 Perovskite Fast Oxide Ion Conductor and Intermediate Temperature Solid Oxide Fuel Cell , 1999 .

[93]  Scott A. Barnett,et al.  Improved Performance in (La,Sr)MnO3 and (La,Sr)(Co,Fe)O3 Cathodes by the Addition of a Gd-Doped Ceria Second Phase , 1999 .

[94]  B. Steele,et al.  Improving Gd-Doped Ceria Electrolytes for Low Temperature Solid Oxide Fuel Cells , 1999 .

[95]  J. Morse,et al.  Porous Thin-Film Anode Materials for Solid-Oxide fuel Cells , 1999 .

[96]  Chao-chi Huang Effect of Moisture on the Phase Stability of Y2O3-Bi2O3 Solid Electrolytes , 1999 .

[97]  H. Yoon Synthesis and Characterization of Gd1−xSrxMnO3 Cathode for SOFC , 1999 .

[98]  Soondeuk Jeung,et al.  Characteristics of Pr1−xMxMnO3 (M = Ca, Sr) as cathode material in solid oxide fuel cells , 1998 .

[99]  K. Masuda Electrochemial Reaction Kinetics of Mixed Conducting Electrodes on CeO2-Based Solid Electrolytes , 1997 .

[100]  S. Onuma Electrochemical Oxidation of CH4 at the Interface of Pt Electrode and Y2O3-Stabilized ZrO2 Electrolyte , 1997 .

[101]  Scott A. Barnett,et al.  Effect of LSM-YSZ cathode on thin-electrolyte solid oxide fuel cell performance , 1997 .

[102]  O. Mar'ina Ceria-Based Anodes on a YSZ Electrolyte: Preparation and Electrochemical Performance , 1997 .

[103]  M. Hrovat,et al.  Characterisation of LaNi1-xCoxO3 as a possible SOFC cathode material , 1996 .

[104]  高橋 武彦,et al.  Science and technology of ceramic fuel cells , 1995 .