Microstructure Evolution in Laser Deposited Nickel-Titanium-Carbon in situ Metal Matrix Composite

Ni/TiC metal matrix composites have been processed using the laser engineered net shaping (LENS) process. As nickel does not form an equilibrium carbide phase, addition of a strong carbide former in the form of titanium reinforces the nickel matrix resulting in a promising hybrid material for both surface engineering as well as high temperature structural applications. Changing the relative amounts of titanium and carbon in the nickel matrix, relatively low volume fraction of refined homogeneously distributed carbide precipitates, formation of in-situ carbide precipitates and the microstructural changes are investigated. The composites have been characterized in detail using x-ray diffraction, scanning electron microscopy (including energy dispersive spectroscopy (XEDS) mapping and electron backscatter diffraction (EBSD)), Auger electron spectroscopy, and transmission (including high resolution) electron microscopy. Both primary and eutectic titanium carbides, observed in this composite, exhibited the fcc-TiC structure (NaCl-type). Details of the orientation relationship between Ni and TiC have been studied using SEM-EBSD and high resolution TEM. The results of micro-hardness and tribology tests indicate that these composites have a relatively high hardness and a steady-state friction coefficient of ~0.5, both of which are improvements in comparison to LENS deposited pure Ni.

[1]  Dong Liu,et al.  High temperature mechanical properties of a laser melting deposited TiC/TA15 titanium matrix composite , 2010 .

[2]  Xinhua Wu,et al.  Compositionally graded Ti6Al4V + TiC made by direct laser fabrication using powder and wire , 2007 .

[3]  Jiandong Hu,et al.  Effect of TiC content on Ni/TiC composites by direct laser fabrication , 2009 .

[4]  W. Lengauer.  Transition Metal Carbides, Nitrides, and Carbonitrides , 2008 .

[5]  Sie Chin Tjong,et al.  Microstructural and mechanical characteristics of in situ metal matrix composites , 2000 .

[6]  Y. F. Yang,et al.  Thermal explosion reaction behaviors between Ti and C with Ni as additive under air and Ar atmosphere , 2009 .

[7]  Z. Wokulski,et al.  Microstructure of TiC crystals obtained from high temperature nickel solution , 2003 .

[8]  J. Mei,et al.  Near net shape manufacturing of components using direct laser fabrication technology , 2003 .

[9]  Bin Li,et al.  Microstructure and mechanical behaviors of in situ TiC particulates reinforced Ni matrix composites , 2010 .

[10]  H. Ye,et al.  Microstructure investigations on explosive TiNi(or Ni)/TiC-composite-formation reaction during mechanical alloying , 1996 .

[11]  B. Langelier,et al.  In-situ laser-fabrication and characterization of TiC-containing Ti―Co composite on pure Ti substrate , 2009 .

[12]  Hua-ming Wang,et al.  Microstructure and tensile properties of laser melting deposited TiC/TA15 titanium matrix composites , 2009 .

[13]  D. Miracle.  Metal matrix composites – From science to technological significance , 2005 .

[14]  D. Burkes,et al.  Microstructure and kinetics of a functionally graded NiTi–TiCx composite produced by combustion synthesis , 2007 .

[15]  J. Dupont,et al.  Fabrication of carbide-particle-reinforced titanium aluminide-matrix composites by laser-engineered net shaping , 2004 .

[16]  S. N. Kosolobov,et al.  Long term operation of high quantum efficiency GaAs(Cs,O) photocathodes using multiple recleaning by atomic hydrogen , 2009 .

[17]  Baolong Zheng,et al.  The Influence of Ni-Coated TiC on Laser-Deposited IN625 Metal Matrix Composites , 2010 .