Borehole Stability in High-Temperature Formations

[1]  George V. Chilingarian,et al.  Petroleum Related Rock Mechanics , 1993, Developments in Petroleum Science.

[2]  Springer-Verlag Wien,et al.  Borehole Stability Analysis of Horizontal Drilling in Shale Gas Reservoirs , 2013 .

[3]  Zhao Xiangyang A transient heat transfer model of wellbore and formation during the whole drilling process , 2013 .

[4]  Zhu Shuyun PHYSICO-MECHANICAL PROPERTIES VARIATION OF ROCK WITH PHASE TRANSFORMATION UNDER HIGH TEMPERATURE , 2013 .

[5]  J. A. Wong-Loya,et al.  A new practical method for the determination of static formation temperatures in geothermal and petroleum wells using a numerical method based on rational polynomial functions , 2012 .

[6]  H. Roshan,et al.  Chemo-poroplastic analysis of a borehole drilled in a naturally fractured chemically active formation , 2012 .

[7]  Mohammad Ebrahim Zeynali,et al.  Mechanical and physico-chemical aspects of wellbore stability during drilling operations , 2012 .

[8]  Mishari Ameen Al-Awadi,et al.  Corrosion Monitoring, Root Cause Analysis and Selection Criteria for Future Well Completion Design in Deep HPHT Sour Wells , 2012 .

[9]  Xu Xiao-li Experimental study of temperature effect of mechanical properties of granite , 2011 .

[10]  Chen Lun-jian Experimental research on swelling properties of limestone and sandstone at high temperature , 2011 .

[11]  Zhang Jincheng,et al.  DRILLING TECHNOLOGY FOR DEEP & ULTRA-DEEP WELL IN WEST CHINA , 2010 .

[12]  Jincai Zhang,et al.  Stress, porosity, and failure-dependent compressional and shear velocity ratio and its application to wellbore stability , 2009 .

[13]  G. Espinosa-Paredes,et al.  Application of a proportional-integral control for the estimation of static formation temperatures in oil wells , 2009 .

[14]  Zhao Hongbao EXPERIMENTAL INVESTIGATION ON MECHANICAL PROPERTIES OF COARSE SANDSTONE AFTER HIGH TEMPERATURE UNDER CONVENTIONAL TRIAXIAL COMPRESSION , 2009 .

[15]  Ying Zhang,et al.  Combining Proven Anti-Sag Technologies for HPHT North Sea Applications: Clay-Free Oil-Based Fluid and Synthetic, Sub-Micron Weight Material , 2009 .

[16]  H. Xiao-guang Experimental Research on Heat Swelling Power of Sandstone and Limestone , 2008 .

[17]  Li Xiaoshuang EXPERIMENTAL RESEARCH ON MECHANICAL PROPERTIES OF COARSE SANDSTONE AFTER HIGH TEMPERATURES , 2008 .

[18]  Li Xiaoshuang STUDY ON RELATION BETWEEN MECHANICAL PROPERTIES AND LONGITUDINAL WAVE VELOCITIES FOR DAMAGED ROCK SAMPLES , 2008 .

[19]  Robert W. Zimmerman,et al.  Stability analysis of vertical boreholes using the Mogi–Coulomb failure criterion , 2006 .

[20]  A. I. Sofianos,et al.  Equivalent Mohr–Coulomb and generalized Hoek–Brown strength parameters for supported axisymmetric tunnels in plastic or brittle rock , 2006 .

[21]  R. Ewy,et al.  Thermoporoelastic Effect on Wellbore Stability , 2005 .

[22]  Yu Lian-jun FORMATION FRACTURE PRESSURE CALCULATION IN HIGH TEMPERATURES WELLS , 2005 .

[23]  Gilberto Espinosa-Paredes,et al.  Thermal behaviour of geothermal wells using mud and air–water mixtures as drilling fluids , 2004 .

[24]  Nick Terdre,et al.  ConocoPhillips paves the way for removal of giant Ekofisk tank , 2004 .

[25]  James Dodson,et al.  Gulf of Mexico 'trouble time' creates major drilling expenses: Use of cost-effective technologies needed , 2004 .

[26]  Erhu Gao,et al.  High-Pressure , High-Temperature Well Construction , 2004 .

[27]  Bernt S. Aadnøy,et al.  Introduction to special issue on Borehole Stability , 2003 .

[28]  X. Xiao,et al.  Multiphase natural gas migration and accumulation and its relationship to diapir structures in the DF1-1 gas field, South China Sea , 2002 .

[29]  Maurice B. Dusseault,et al.  Assessment of some semi-analytical models for non-linear modelling of borehole stresses , 1998 .

[30]  Z. Zheng,et al.  Integrated Borehole Stability Analysis - Against Tradition , 1998 .

[31]  Vincent Maury,et al.  Practical Advantages of Mud Cooling Systems for Drilling , 1995 .

[32]  C. S. Kabir,et al.  Determination of Static Reservoir Temperature From Transient Data Following Mud Circulation , 1994 .

[33]  F. K. Mody,et al.  Borehole-Stability Model To Couple the Mechanics and Chemistry of Drilling-Fluid/Shale Interactions , 1993 .

[34]  M. Chenevert,et al.  Permeability and effective pore pressure of shales , 1993 .

[35]  J. A. Howard,et al.  Cementing Temperature Predictions Based on Both Downhole Measurements and Computer Predictions: A Case History , 1993 .

[36]  M. Boas Temperature Profile of a Fluid Flowing within a Well , 1990 .

[37]  B. Aadnøy,et al.  Method for Fracture-Gradient Prediction for Vertical and Inclined Boreholes , 1989 .

[38]  Emmanuel M Detournay,et al.  Poroelastic response of a borehole in a non-hydrostatic stress field , 1988 .

[39]  Bernt S. Aadnøy,et al.  STABILITY OF HIGHLY INCLINED BOREHOLES. , 1987 .

[40]  B. Aadnøy,et al.  Method for Fracture Gradient Prediction for Vertical and Inclined Boreholes , 1987 .

[41]  A. Guenot,et al.  Numerical Computation of Temperature Distribution in a Wellbore While Drilling , 1984 .

[42]  D. Zeuch The mechanical behavior of Anvil Points oil shale at elevated temperatures and confining pressures , 1983 .

[43]  Ramon G. Bentsen,et al.  A Computer Model to Determine the Temperature Distributions In a Wellbore , 1982 .

[44]  W. B. Bradley,et al.  The Effect of Temperature on Tensile and Compressive Strengths and Young's Modulus of Oil Shale , 1979 .

[45]  A. Romero-Juarez A Simplified Method for Calculating Temperature Changes in Deep Wells , 1979 .

[46]  L. Thigpen Vertical Stress Distribution in Oil-Shale Aggregate Columns During Retorting , 1979 .

[47]  W. B. Bradley Mathematical concept - Stress Cloud - can predict borehole failure , 1979 .

[48]  Mark D. Zoback,et al.  Hydraulic Fracture Propagation And The Interpretation Of Pressure-Time Records For In-Situ Stress Determinations , 1978 .

[49]  Gene Simmons,et al.  Thermal expansion behavior of igneous rocks , 1974 .

[50]  E. J. Couch,et al.  Temperature Distribution in Circulating Mud Columns , 1973 .

[51]  L. R. Raymond Temperature Distribution in a Circulating Drilling Fluid , 1969 .