A passive microfluidic hydrogen-air fuel cell with exceptional stability and high performance.

We describe an advanced microfluidic hydrogen-air fuel cell (FC) that exhibits exceptional durability and high performance, most notably yielding stable output power (>100 days) without the use of an anode-cathode separator membrane. This FC embraces an entirely passive device architecture and, unlike conventional microfluidic designs that exploit laminar hydrodynamics, no external pumps are used to sustain or localize the reagent flow fields. The devices incorporate high surface area/porous metal and metal alloy electrodes that are embedded and fully immersed in liquid electrolyte confined in the channels of a poly(dimethylsiloxane) (PDMS)-based microfluidic network. The polymeric network also serves as a self-supporting membrane through which oxygen and hydrogen are supplied to the cathode and alloy anode, respectively, by permeation. The operational stability of the device and its performance is strongly dependent on the nature of the electrolyte used (5 M H2SO4 or 2.5 M NaOH) and composition of the anode material. The latter choice is optimized to decrease the sensitivity of the system to oxygen cross-over while still maintaining high activity towards the hydrogen oxidation reaction (HOR). Three types of high surface area anodes were tested in this work. These include: high-surface area electrodeposited Pt (Pt); high-surface area electrodeposited Pd (Pd); and thin palladium adlayers supported on a "porous" Pt electrode (Pd/Pt). The FCs display their best performance in 5 M H2SO4 using the Pd/Pt anode. This exceptional stability and performance was ascribed to several factors, namely: the high permeabilities of O2, H2, and CO2 in PDMS; the inhibition of the formation of insoluble carbonate species due to the presence of a highly acidic electrolyte; and the selectivity of the Pd/Pt anode toward the HOR. The stability of the device for long-term operation was modeled using a stack of three FCs as a power supply for a portable display that otherwise uses a 3 V battery.

[1]  Larry J. Markoski,et al.  Microfluidic fuel cell based on laminar flow , 2004 .

[2]  Toshiyuki Momma,et al.  Design and fabrication of pumpless small direct methanol fuel cells for portable applications , 2004 .

[3]  Adam Heller,et al.  A miniature biofuel cell operating in a physiological buffer. , 2002, Journal of the American Chemical Society.

[4]  Ralph G Nuzzo,et al.  Microfluidic devices for energy conversion: planar integration and performance of a passive, fully immersed H2-O2 fuel cell. , 2004, Langmuir : the ACS journal of surfaces and colloids.

[5]  P. Ross,et al.  Kinetics of Oxygen Reduction on an Epitaxial Film of Palladium on Pt(111) , 2000 .

[6]  J. Meyers,et al.  Miniature fuel cells for portable power: Design considerations and challenges , 2002 .

[7]  J. E. Benson,et al.  On the specific activity of platinum catalysts , 1966 .

[8]  Ralph G Nuzzo,et al.  A split microchannel design and analytical model to compensate for electroosmotic instabilities in micro-separations. , 2002, Lab on a chip.

[9]  M. Enyo.  Hydrogen Electrode Reaction on Electrocatalytically Active Metals , 1983 .

[10]  A. Heller.  Miniature biofuel cells , 2004 .

[11]  J. Mcbreen,et al.  Spontaneous deposition of Pd on a Ru(0001) surface , 2001 .

[12]  Paul J. A. Kenis,et al.  Characterization of Limiting Factors in Laminar Flow-Based Membraneless Microfuel Cells , 2005 .

[13]  A. Wiȩckowski,et al.  Formic Acid Decomposition on Polycrystalline Platinum and Palladized Platinum Electrodes , 1999 .

[14]  H. Gasteiger,et al.  Effect of temperature on surface processes at the Pt(111)-liquid interface: Hydrogen adsorption, oxide formation and CO oxidation , 1999 .

[15]  Paul J. A. Kenis,et al.  Characterization and application of electrodeposited Pt, Pt/Pd, and Pd catalyst structures for direct formic acid micro fuel cells , 2005 .

[16]  D. Papageorgopoulos,et al.  Examining a Potential Fuel Cell Poison A Voltammetry Study of the Influence of Carbon Dioxide on the Hydrogen Oxidation Capability of Carbon-Supported Pt and PtRu Anodes , 2002 .

[17]  Pratibha Pandey,et al.  Membranes for gas separation , 2001 .

[18]  W. Smyrl,et al.  Miniature fuel cells fabricated on silicon substrates , 2002 .

[19]  V. Climent,et al.  Anion adsorption on Pd-Pt(111) electrodes in sulphuric acid solution , 2001 .

[20]  Junliang Zhang,et al.  Platinum monolayer electrocatalysts for O2 reduction: Pt monolayer on Pd(111) and on carbon-supported Pd nanoparticles , 2004 .

[21]  Hubert A. Gasteiger,et al.  Dependence of PEM fuel cell performance on catalyst loading , 2004 .

[22]  G. Whitesides,et al.  Membraneless vanadium redox fuel cell using laminar flow. , 2002, Journal of the American Chemical Society.

[23]  Chaoyang Wang,et al.  Development and characterization of a silicon-based micro direct methanol fuel cell , 2004 .

[24]  F. de Bruijn,et al.  CO tolerance of Pd-Rich platinum palladium carbon-supported electrocatalysts: Proton exchange membrane fuel cell applications , 2002 .

[25]  L. Carrette,et al.  Fuel Cells - Fundamentals and Applications , 2001 .

[26]  Ralph G Nuzzo,et al.  An electrochemically driven poly(dimethylsiloxane) microfluidic actuator: oxygen sensing and programmable flows and pH gradients. , 2005, Lab on a chip.

[27]  J. Farcy,et al.  Electrochemical study of hydrogen interaction with palladium and platinum , 1975 .

[28]  M. Balasubramanian,et al.  Pt submonolayers on metal nanoparticles—novel electrocatalysts for H2 oxidation and O2 reduction , 2003 .

[29]  P. Ross,et al.  Surface electrochemistry on an epitaxial palladium film on Pt(111): surface microstructure and hydrogen electrode kinetics , 2000 .

[30]  E. Oldfield,et al.  Bonding and Motional Aspects of CO Adsorbed on the Surface of Pt Nanoparticles Decorated with Pd , 2004 .

[31]  Alan F. Jankowski,et al.  Novel proton exchange membrane thin-film fuel cell for microscale energy conversion , 2000 .

[32]  N. Marković,et al.  The Oxygen Reduction Reaction on Thin Palladium Films Supported on a Pt(111) Electrode , 2003 .

[33]  A. M. Feltham,et al.  Platinized platinum electrodes , 1971 .

[34]  Su Ha,et al.  A miniature air breathing direct formic acid fuel cell , 2004 .

[35]  David Sinton,et al.  Improved fuel utilization in microfluidic fuel cells: A computational study , 2005 .

[36]  G. Attard,et al.  The electrochemical behaviour of irreversibly adsorbed palladium on Pt(111) in acid media , 1991 .