Correlative characterization of primary particles formed in as-cast Al-Mg alloy containing a high level of Sc

[1]  Z. Yin,et al.  Synergetic effects of Sc and Zr microalloying and heat treatment on mechanical properties and exfoliation corrosion behavior of Al-Mg-Mn alloys , 2016 .

[2]  Yucheng Wu,et al.  Formation of the eutecticum with multilayer structure during solidification in as-cast Al–Mg alloy containing a high level of Sc , 2016 .

[3]  Yucheng Wu,et al.  Effect of Sc on microstructure and mechanical properties of as-cast Al–Mg alloys , 2016 .

[4]  Yun-jia Shi,et al.  Microstructure dependent fatigue crack growth in Al–Mg–Sc alloy , 2014 .

[5]  Yi Wu,et al.  First-principles investigation of mechanical, electronic and optical properties of Al3Sc intermetallic compound under pressure , 2014 .

[6]  Yun-jia Shi,et al.  Fatigue crack growth behavior of Al–Mg–Sc alloy , 2014 .

[7]  S. Danis,et al.  Precipitation in cold-rolled Al–Sc–Zr and Al–Mn–Sc–Zr alloys prepared by powder metallurgy , 2013 .

[8]  R. Mishra,et al.  Additivity of strengthening mechanisms in ultrafine grained Al–Mg–Sc alloy , 2013 .

[9]  Xi-Qiao Feng,et al.  Dynamic response and microstructure control of Al-Sc binary alloy under high-speed impact , 2013 .

[10]  A. Pinto,et al.  The effect of Sc additions on the microstructure and age hardening behaviour of as cast Al–Sc alloys , 2012 .

[11]  C. Sinclair,et al.  Recovery kinetics in the presence of precipitates: The softening response of an Al–Mg–Sc alloy , 2010 .

[12]  Min Song,et al.  Effects of Er on the microstructure and mechanical properties of an as-extruded Al-Mg alloy , 2009 .

[13]  M. K. Banerjee,et al.  Effect of scandium on the microstructure and ageing behaviour of cast Al–6Mg alloy , 2008 .

[14]  Zijiong Li,et al.  Effect of complex alloying of Sc, Zr and Ti on the microstructure and mechanical properties of Al-5Mg alloys , 2008 .

[15]  V. Neubert,et al.  Annealing effects in Al–Sc alloys , 2007 .

[16]  N. Birbilis,et al.  Investigating localized corrosion susceptibility arising from Sc containing intermetallic Al3Sc in high strength Al-alloys , 2007 .

[17]  P. De,et al.  Effect of Al3Sc precipitates on the work hardening behavior of aluminum–scandium alloys , 2006 .

[18]  D. Seidman,et al.  Coarsening kinetics of nanoscale Al3Sc precipitates in an Al-Mg-Sc alloy , 2005 .

[19]  K. Ihara,et al.  Dynamic recrystallization in Al–Mg–Sc alloys , 2004 .

[20]  K. Venkateswarlu,et al.  Microstructure, tensile strength and wear behaviour of Al–Sc alloy , 2004 .

[21]  F. J. Humphreys,et al.  Interaction of recrystallization and precipitation: The effect of Al3Sc on the recrystallization behaviour of deformed aluminium , 2003 .

[22]  A. Ardell,et al.  Precipitation of Al3Sc in binary Al–Sc alloys , 2001 .

[23]  M. Slámová,et al.  Resistance to recrystallization due to Sc and Zr addition to Al-Mg alloys , 2001 .

[24]  P. Prangnell,et al.  The effect of cooling rate on the morphology of primary Al3Sc intermetallic particles in Al–Sc alloys , 2001 .

[25]  T. Srivatsan,et al.  The high cycle fatigue and fracture behavior of aluminum alloy 7055 , 2000 .

[26]  V. V. Zakharov,et al.  Scientific principles of making an alloying addition of scandium to aluminium alloys , 2000 .

[27]  Z. Yin,et al.  Effect of minor Sc and Zr on the microstructure and mechanical properties of Al–Mg based alloys , 2000 .

[28]  P. Prangnell,et al.  The solidification behaviour of dilute aluminium–scandium alloys , 1998 .