A method for determining adequate resistance form of complete cast crown preparations.

A diagram with various degrees of occlusal convergence, which takes into consideration the length and diameter of complete crown preparations, was designed as a guide to assist the dentist to obtain adequate resistance form. To test the validity of the diagram, five groups of complete cast crown stainless steel dies were prepared (3.5 mm long, occlusal convergence 10, 13, 16, 19, and 22 degrees). Gold copings were cast for each of the 50 preparations. Displacement force was applied to the casting perpendicularly to a simulated 30-degree cuspal incline until the casting was displaced. Castings were deformed at margins except for the 22-degree group. Castings from this group were displaced without deformation, and it was concluded that there was a lack of adequate resistance form as predicted by the diagram. The hypothesis that the diagram could be used to predict adequate or inadequate resistance form was confirmed by this study.