Electromechanical coupling modelling of distributed MEMS phase shifter for phased array antennas

ABSTRACT MEMS phase shifter has many advantages as the ‘steering wheel’ of phased array antenna beam steering. The deformation of mechanical structures of MEMS phase shifter influenced by the complex environmental factors, which became the biggest obstacle to further enhance the performance of phased array antennas. The electromechanical coupling model between the bridge height and phase shift of the distributed MEMS phase shifter is developed. The coupling model could be used to predict the phase error and determine the bridge height tolerance for the deformed MEMS phase shifter. The simulation results of four-bit distributed MEMS phase shifter with 15 bridges illustrate the validity of coupling model and demonstrate the application potential for engineering design and test.

[1]  A. K. Aboul-Seoud,et al.  D5. Wideband tunable MEMS phase shifters for radar phased array antenna , 2012, 2012 29th National Radio Science Conference (NRSC).

[2]  Gabriel M. Rebeiz,et al.  Optimization of distributed MEMS phase shifters , 1999, 1999 IEEE MTT-S International Microwave Symposium Digest (Cat. No.99CH36282).

[3]  Gabriel M. Rebeiz Phase Noise Analysis of MEMS-Based Phase Shifters , 2001, 2001 31st European Microwave Conference.

[4]  A.M. Ionescu,et al.  Thermally Stable Distributed MEMS Phase Shifter for Airborne and Space Applications , 2008, 2008 38th European Microwave Conference.

[5]  Wei Wang,et al.  On the performance of array antennas with mechanical distortion errors considering element numbers , 2017 .

[6]  A. M. Ionescu,et al.  Reliability of RF MEMS Capacitive Switches and Distributed MEMS Phase Shifters using AlN Dielectric , 2009, 2009 IEEE 22nd International Conference on Micro Electro Mechanical Systems.

[7]  Thomas George Overview of MEMS/NEMS technology development for space applications at NASA/JPL , 2003, SPIE Microtechnologies.

[8]  Gao Yang,et al.  Design and modeling of 4-bit MEMS switched-line phase shifter , 2011, 2011 International Conference on Electronics, Communications and Control (ICECC).

[9]  He Xunjun Time Response Characteristic Investigation of the Capacitive Switches for Distributed MEMS Phase Shifters , 2007 .

[10]  P. Blondy,et al.  Phase Shifter Design Based on Fast RF MEMS Switched Capacitors , 2008, 2008 European Microwave Integrated Circuit Conference.

[11]  Shuai Yuan,et al.  Structural–electrical coupling optimisation for radiating and scattering performances of active phased array antenna , 2018 .

[12]  Barbara Robertson,et al.  Optimization of MEMS Ku-band phase shifter , 2004 .

[13]  S. Raghavan,et al.  Neural based optimization analysis of distributed MEMS transmission line phase shifters , 2010, 2010 International Conference on Intelligent Control and Information Processing.

[14]  B. Pillans,et al.  RF MEMS devices: a brave new world for RF technology , 2000, 2000 IEEE Emerging Technologies Symposium on Broadband, Wireless Internet Access. Digest of Papers (Cat. No.00EX414).

[15]  Yu Liu,et al.  Low-loss distributed MEMS phase shifter , 2000 .

[16]  Gabriel M. Rebeiz,et al.  Optimization of distributed MEMS transmission-line phase shifters-U-band and W-band designs , 2000 .

[17]  Gabriel M. Rebeiz,et al.  Distributed MEMS true-time delay phase shifters and wide-band switches , 1998 .

[18]  Qun Wu,et al.  A novel design of RF-MEMS phase shifter based on bridge-like coplanar waveguide , 2008, 2008 6th IEEE International Conference on Industrial Informatics.

[19]  Congsi Wang,et al.  Coupled structural-electromagnetic-thermal modelling and analysis of active phased array antennas , 2010 .

[20]  Kamaljeet Singh,et al.  Electromagnetic modelling of conductor-backed CPW based RF MEMS capacitive shunt switch , 2009 .

[21]  George E. Ponchak,et al.  Ka-Band, MEMS Switched Line Phase Shifters Implemented in Finite Ground Coplanar Waveguide , 2002, 2002 32nd European Microwave Conference.

[22]  Gabriel M. Rebeiz,et al.  An Electronically-Scanned 1.8–2.1 GHz Base-Station Antenna Using Packaged High-Reliability RF MEMS Phase Shifters , 2013, IEEE Transactions on Microwave Theory and Techniques.

[23]  Marco A. Panduro,et al.  Design of scannable linear arrays with amplitude and phase optimisation for maximum side lobe level reduction , 2009 .

[24]  G.M. Rebeiz,et al.  A very low loss 1.9–2.1 GHz RF MEMS phase shifter , 2012, 2012 IEEE/MTT-S International Microwave Symposium Digest.

[25]  G.E. Ponchak,et al.  RF MEMS phase shifters and their application in phase array antennas , 2005, The 2005 IEEE Annual Conference Wireless and Micrwave Technology, 2005..

[26]  Guan-Leng Tan,et al.  RF MEMS phase shifters: design and applications , 2002 .

[27]  C. J. Aguilar-Armenta,et al.  Cantilever RF-MEMS for monolithic integration with phased array antennas on a PCB , 2015 .

[28]  Fushun Zhang,et al.  Analysis of performance of active phased array antennas with distorted plane error , 2009 .