Estimation of Tree Stem Attributes Using Terrestrial Photogrammetry with a Camera Rig

We propose a novel photogrammetric method for field plot inventory, designed for simplicity and time efficiency on-site. A prototype multi-camera rig was used to acquire images from field plot centers in multiple directions. The acquisition time on-site was less than two minutes. From each view, a point cloud was generated using a novel, rig-based matching of detected SIFT keypoints. Stems were detected in the merged point cloud, and their positions and diameters were estimated. The method was evaluated on 25 hemi-boreal forest plots of a 10-m radius. Due to difficult lighting conditions and faulty hardware, imagery from only six field plots was processed. The method performed best on three plots with clearly visible stems with a 76% detection rate and 0% commission. Diameters could be estimated for 40% of the stems with an RMSE of 2.8–9.5 cm. The results are comparable to other camera-based methods evaluated in a similar manner. The results are inferior to TLS-based methods. However, our method is easily extended to multiple station image schemas, something that could significantly improve the results while retaining low commission errors and time on-site. Furthermore, with smaller hardware, we believe this could be a useful technique for measuring stem attributes in the forest.

[1]  W. Gander,et al.  Least-squares fitting of circles and ellipses , 1994 .

[2]  Andrea Vedaldi,et al.  Vlfeat: an open and portable library of computer vision algorithms , 2010, ACM Multimedia.

[3]  Pierre Grussenmeyer,et al.  Pros and cons of constrained and unconstrained formulation of the bundle adjustment problem , 2004 .

[4]  Juha Hyyppä,et al.  Automatic Stem Mapping Using Single-Scan Terrestrial Laser Scanning , 2012, IEEE Transactions on Geoscience and Remote Sensing.

[5]  Robert C. Bolles,et al.  Random sample consensus: a paradigm for model fitting with applications to image analysis and automated cartography , 1981, CACM.

[6]  Nikolay Strigul,et al.  3D tree dimensionality assessment using photogrammetry and small unmanned aerial vehicles , 2015 .

[7]  T. Rabbani,et al.  SEGMENTATION OF POINT CLOUDS USING SMOOTHNESS CONSTRAINT , 2006 .

[8]  J. Holmgren,et al.  ESTIMATION OF TREE STEM ATTRIBUTES USING TERRESTRIAL PHOTOGRAMMETRY , 2012 .

[9]  Matthijs C. Dorst.  Distinctive Image Features from Scale-Invariant Keypoints , 2011 .

[10]  Pierre Grussenmeyer,et al.  Bundle Adjustment With and Without Damping , 2013 .

[11]  Daniel L. Schmoldt,et al.  A Review of Past Research on Dendrometers , 2000, Forest Science.

[12]  Bernhard P. Wrobel,et al.  Multiple View Geometry in Computer Vision , 2001 .

[13]  Gérard Nepveu,et al.  Assessment of the assortment potential of the growing stock - a photogrammetry based approach for an automatized grading of sample trees , 2006 .

[14]  Johan Holmgren,et al.  A method for linking field-surveyed and aerial-detected single trees using cross correlation of position images and the optimization of weighted tree list graphs. , 2008 .

[15]  J. Holmgren,et al.  Estimation of stem attributes using a combination of terrestrial and airborne laser scanning , 2012, European Journal of Forest Research.

[16]  Juha Hyyppä,et al.  Forest Data Collection Using Terrestrial Image-Based Point Clouds From a Handheld Camera Compared to Terrestrial and Personal Laser Scanning , 2015, IEEE Transactions on Geoscience and Remote Sensing.

[17]  Pierre Grussenmeyer,et al.  Camera Calibration using the Damped Bundle Adjustment Toolbox , 2014 .

[18]  I Söderkvist,et al.  Determining the movements of the skeleton using well-configured markers. , 1993, Journal of biomechanics.

[19]  A. Berveglieri,et al.  A feasibility study on the measurement of tree trunks in forests using multi-scale vertical images , 2014 .

[20]  Johan Holmgren,et al.  Tree Stem and Height Measurements using Terrestrial Laser Scanning and the RANSAC Algorithm , 2014, Remote. Sens..

[21]  Juha Hyyppä,et al.  The Use of a Hand-Held Camera for Individual Tree 3D Mapping in Forest Sample Plots , 2014, Remote. Sens..

[22]  AstrupRasmus,et al.  Adjusting for nondetection in forest inventories derived from terrestrial laser scanning , 2013 .

[23]  E. Schulze,et al.  Sampling forest tree regeneration with a transect approach , 2013 .

[24]  J. Kershaw,et al.  Spatial Tree Mapping Using Photography. , 2010 .

[25]  Jean-Michel Leban,et al.  A digital photographic method for 3D reconstruction of standing tree shape , 2007, Annals of Forest Science.

[26]  N. Pfeifer,et al.  AUTOMATIC RECONSTRUCTION OF SINGLE TREES FROM TERRESTRIAL LASER SCANNER DATA , 2004 .

[27]  I. Cañellas,et al.  Stem mapping and estimating standing volume from stereoscopic hemispherical images , 2014, European Journal of Forest Research.

[28]  Juha Hyyppä,et al.  Automatic Stem Mapping by Merging Several Terrestrial Laser Scans at the Feature and Decision Levels , 2013, Sensors.

[29]  A. Hapca,et al.  Three-dimensional profile classification of standing trees using a stereophotogrammetric method , 2008 .

[30]  Juha Hyyppä,et al.  AUTOMATIC PLOT-WISE TREE LOCATION MAPPING USING SINGLE-SCAN TERRESTRIAL LASER SCANNING , 2011 .

[31]  Amr H. Abd-Elrahman,et al.  A community-based urban forest inventory using online mapping services and consumer-grade digital images , 2010, Int. J. Appl. Earth Obs. Geoinformation.