Candidate blanket concepts for a European fusion power plant study

Abstract The breeding blanket is an essential in-vessel component for fusion power plants based on the deuterium–tritium fuel. It is submitted to severe operating conditions such as high surface heat flux on the first wall (>0.5 MW/m2) and to very high 14 MeV neutron flux (>1018 n/m2 s). Because of the simultaneous requirement of very demanding performances, such as tritium breeding self-sufficiency, high thermal cycle efficiency, high availability and high safety standards, the number of candidate breeding blanket concepts is limited. After recalling advantages and drawbacks of possible combinations of structural materials, coolants, and breeder materials, this paper summarizes the characteristics and the performances of some potential candidate concepts for a European power plant study and associated required R&D.

[1]  Mark S. Tillack,et al.  High performance PbLi blanket , 1997, 17th IEEE/NPSS Symposium Fusion Engineering (Cat. No.97CH36131).

[2]  Neil B. Morley,et al.  Design requirements for SiC/SiC composites structural material in fusion power reactor blankets , 1998 .

[3]  Farrokh Najmabadi,et al.  The ARIES-RS power core -- Recent development in Li/V designs , 1997 .

[4]  Donald L. Smith,et al.  Results of R&D for lithium/vanadium breeding blanket design , 1998 .

[5]  M. Dalle Donne,et al.  Status of the European breeding blanket technology , 1997 .

[6]  G. Kalinin,et al.  Material problems and requirements related to the development of fusion blankets : the designer point of view , 1994 .

[7]  L. Giancarli,et al.  Performance of the TAURO blanket system associated with a liquid-metal cooled divertor , 2000 .

[8]  S. Malang,et al.  Limitations on blanket performance , 1999 .

[9]  Richard F. Mattas,et al.  Comparison of lithium and the eutectic lead lithium alloy, two candidate liquid metal breeder materials for self-cooled blankets , 1995 .

[10]  H. Takatsu,et al.  Development of ceramic breeder blankets in Japan , 1998 .

[11]  L. Giancarli,et al.  Breeding blanket for DEMO , 1993 .

[12]  L. Giancarli,et al.  Status of the European R&D activities on SiCf /SiC composites for fusion reactors , 2000 .

[13]  H. Miura,et al.  Improved tokamak concept focusing on easy maintenance , 1998 .

[14]  Ulrich Fischer,et al.  Advanced helium cooled pebble bed blanket with SiCf/SiC as structural material , 2000 .

[15]  F. Najmabadi,et al.  ARIES-I fusion-power-core engineering , 1991 .

[16]  Ralph W. Moir,et al.  Molten salts in fusion nuclear technology , 1998 .

[17]  E. Proust,et al.  Overview of EU activities on DEMO liquid metal breeder blankets , 1995 .