论文信息 - Dynamic model of a multiple disk and spindle assembly

Dynamic model of a multiple disk and spindle assembly

A simplified dynamic model of a multiple disk and spindle assembly is discussed in this paper. The model is particularly focused at describing the coupling between spindle and disk motion, therefore it is suitable for the design of a spindle motion control aimed at minimising the vibrations of the disks. The model has been validated by comparison of the resonance frequencies obtained by simulation with experimental results, available in the literature.

Paolo Rocco | Gianni Ferretti | Gianantonio Magnani | A. Furlan | G. Maiocchi

[1] J. McAllister. The effect of disk platter resonances on track misregistration in 3.5 inch disk drives , 1996 .

[2] I. Y. Shen,et al. Closed-Form Forced Response of a Damped, Rotating, Multiple Disks/Spindle System , 1997 .

[3] J. McAllister. Characterization of disk vibrations on aluminum and alternate substrates , 1996 .

[4] C. D. Mote,et al. Natural Frequencies Of A Thin Disk, Clamped By Thick Collars With Friction At The Contacting Surfaces, Spinning At High Rotation Speed , 1993 .

[5] I. Y. Shen,et al. A Nonclassical Vibration Analysis of a Multiple Rotating Disk and Spindle Assembly , 1997 .