ACL Fibers Near the Lateral Intercondylar Ridge Are the Most Load Bearing During Stability Examinations and Isometric Through Passive Flexion

Background: The femoral insertion of the anterior cruciate ligament (ACL) has direct and indirect fiber types located within the respective high (anterior) and low (posterior) regions of the femoral footprint. Hypothesis: The fibers in the high region of the ACL footprint carry more force and are more isometric than the fibers in the low region of the ACL footprint. Study Design: Controlled laboratory study. Methods: Ten fresh-frozen cadaveric knees were mounted to a robotic manipulator. A 134-N anterior force at 30° and 90° of flexion and combined valgus (8 N·m) and internal (4 N·m) rotation torques at 15° of flexion were applied simulating tests of anterior and rotatory stability. The ACL was sectioned at the femoral footprint by detaching either the higher band of fibers neighboring the lateral intercondylar ridge in the region of the direct insertion or the posterior, crescent-shaped fibers in the region of the indirect insertion, followed by the remainder of the ACL. The kinematics of the ACL-intact knee was replayed, and the reduction in force due to each sectioned portion of insertion fibers was measured. Isometry was assessed at anteromedial, center, and posterolateral locations within the high and low regions of the femoral footprint. Results: With an anterior tibial force at 30° of flexion, the high fibers carried 83.9% of the total anterior ACL load compared with 16.1% in the low fibers (P < .001). The high fibers also carried more anterior force than the low fibers at 90° of flexion (95.2% vs 4.8%; P < .001). Under combined torques at 15° of flexion, the high fibers carried 84.2% of the anterior ACL force compared with 15.8% in the low fibers (P < .001). Virtual ACL fibers placed at the anteromedial portion of the high region of the femoral footprint were the most isometric, with a maximum length change of 3.9 ± 1.5 mm. Conclusion: ACL fibers located high within the femoral footprint bear more force during stability testing and are more isometric during flexion than low fibers. Clinical Relevance: It may be advantageous to create a “higher” femoral tunnel during ACL reconstruction at the lateral intercondylar ridge.

[1]  H. Potter,et al.  Comparison of anterior cruciate ligament tunnel position and graft obliquity with transtibial and anteromedial portal femoral tunnel reaming techniques using high-resolution magnetic resonance imaging. , 2011, Arthroscopy : the journal of arthroscopic & related surgery : official publication of the Arthroscopy Association of North America and the International Arthroscopy Association.

[2]  G A Livesay,et al.  A combined robotic/universal force sensor approach to determine in situ forces of knee ligaments. , 1996, Journal of biomechanics.

[3]  S. Woo,et al.  Quantitative analysis of human cruciate ligament insertions. , 1999, Arthroscopy : the journal of arthroscopic & related surgery : official publication of the Arthroscopy Association of North America and the International Arthroscopy Association.

[4]  D. Cooperman,et al.  Morphology of the femoral intercondylar notch. , 2007, The Journal of bone and joint surgery. American volume.

[5]  Mary T. Gabriel,et al.  Distribution of in situ forces in the anterior cruciate ligament in response to rotatory loads , 2004, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[6]  Konsei Shino,et al.  Direct anterior cruciate ligament insertion to the femur assessed by histology and 3-dimensional volume-rendered computed tomography. , 2010, Arthroscopy : the journal of arthroscopic & related surgery : official publication of the Arthroscopy Association of North America and the International Arthroscopy Association.

[7]  F. Noyes,et al.  Anterior Cruciate Ligament Function in Providing Rotational Stability Assessed by Medial and Lateral Tibiofemoral Compartment Translations and Subluxations , 2015, The American journal of sports medicine.

[8]  S L Woo,et al.  The biomechanical and morphological changes in the medial collateral ligament of the rabbit after immobilization and remobilization. , 1987, The Journal of bone and joint surgery. American volume.

[9]  J. O'Connor,et al.  The components of passive knee movement are coupled to flexion angle. , 2000, Journal of biomechanics.

[10]  S. Metz,et al.  Femoral insertions of the anteromedial and posterolateral bundles of the anterior cruciate ligament: morphometry and arthroscopic orientation models for double-bundle bone tunnel placement--a cadaver study. , 2008, Arthroscopy : the journal of arthroscopic & related surgery : official publication of the Arthroscopy Association of North America and the International Arthroscopy Association.

[11]  V. Musahl,et al.  Lateral compartment translation predicts the grade of pivot shift: a cadaveric and clinical analysis , 2010, Knee Surgery, Sports Traumatology, Arthroscopy.

[12]  R. Śmigielski,et al.  Ribbon like appearance of the midsubstance fibres of the anterior cruciate ligament close to its femoral insertion site: a cadaveric study including 111 knees , 2014, Knee Surgery, Sports Traumatology, Arthroscopy.

[13]  T. Thillemann,et al.  Increased risk of revision after anteromedial compared with transtibial drilling of the femoral tunnel during primary anterior cruciate ligament reconstruction: results from the Danish Knee Ligament Reconstruction Register. , 2013, Arthroscopy : the journal of arthroscopic & related surgery : official publication of the Arthroscopy Association of North America and the International Arthroscopy Association.

[14]  A. Amis,et al.  The Role of Fibers in the Femoral Attachment of the Anterior Cruciate Ligament in Resisting Tibial Displacement , 2015, Arthroscopy : the journal of arthroscopic & related surgery : official publication of the Arthroscopy Association of North America and the International Arthroscopy Association.

[15]  Freddie H. Fu,et al.  Contribution of the passive properties of the rotator cuff to glenohumeral stability during anterior-posterior loading. , 1999, Journal of shoulder and elbow surgery.

[16]  Freddie H. Fu,et al.  In situ forces in the anterior cruciate ligament and its bundles in response to anterior tibial loads , 1997, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[17]  J. Lubowitz.  Anatomic ACL reconstruction produces greater graft length change during knee range-of-motion than transtibial technique , 2014, Knee Surgery, Sports Traumatology, Arthroscopy.

[18]  J. Gillquist,et al.  Functional anatomy of the anterior cruciate ligament and a rationale for reconstruction. , 1985, The Journal of bone and joint surgery. American volume.

[19]  Freddie H Fu,et al.  The lateral intercondylar ridge--a key to anatomic anterior cruciate ligament reconstruction. , 2007, The Journal of bone and joint surgery. American volume.

[20]  H Fujie,et al.  Determination of the in situ forces and force distribution within the human anterior cruciate ligament. , 1995, Annals of biomedical engineering.

[21]  K. Markolf,et al.  Anterior-posterior and rotatory stability of single and double-bundle anterior cruciate ligament reconstructions. , 2009, The Journal of bone and joint surgery. American volume.

[22]  Carl Imhauser,et al.  Abnormal Tibiofemoral Contact Stress and Its Association With Altered Kinematics After Center-Center Anterior Cruciate Ligament Reconstruction , 2013, The American journal of sports medicine.

[23]  L. Engebretsen,et al.  Evaluation of a simulated pivot shift test: a biomechanical study , 2011, Knee Surgery, Sports Traumatology, Arthroscopy.

[24]  Freddie H. Fu,et al.  ACL Graft Position Affects in Situ Graft Force Following ACL Reconstruction. , 2015, The Journal of bone and joint surgery. American volume.

[25]  G A Livesay,et al.  The use of a universal force-moment sensor to determine in-situ forces in ligaments: a new methodology. , 1995, Journal of biomechanical engineering.

[26]  Freddie H. Fu,et al.  Comparison of In Situ Forces and Knee Kinematics in Anteromedial and High Anteromedial Bundle Augmentation for Partially Ruptured Anterior Cruciate Ligament , 2011, The American journal of sports medicine.

[27]  E S Grood,et al.  Sensitivity of insertion locations on length patterns of anterior cruciate ligament fibers. , 1986, Journal of biomechanical engineering.

[28]  T. Muneta,et al.  Anatomic and histologic analysis of the mid-substance and fan-like extension fibres of the anterior cruciate ligament during knee motion, with special reference to the femoral attachment , 2014, Knee Surgery, Sports Traumatology, Arthroscopy.

[29]  M. Artmann,et al.  [Investigation of the appropriate functional replacement of the anterior cruciate ligament (author's transl)]. , 1974, Zeitschrift fur Orthopadie und ihre Grenzgebiete.

[30]  A. Pearle,et al.  The pivot shift. , 2008, The Journal of the American Academy of Orthopaedic Surgeons.

[31]  A. A. Amis,et al.  A comparative study of ’isometric’ points for anterior cruciate ligament graft attachment , 2001, Knee Surgery, Sports Traumatology, Arthroscopy.

[32]  R. Colbrunn,et al.  Kinematic analysis of the indirect femoral insertion of the anterior cruciate ligament: implications for anatomic femoral tunnel placement. , 2014, Arthroscopy : the journal of arthroscopic & related surgery : official publication of the Arthroscopy Association of North America and the International Arthroscopy Association.

[33]  Kenji Hara,et al.  Anatomy of Normal Human Anterior Cruciate Ligament Attachments Evaluated by Divided Small Bundles , 2009, The American journal of sports medicine.

[34]  Tomoyuki Mochizuki,et al.  Cadaveric knee observation study for describing anatomic femoral tunnel placement for two-bundle anterior cruciate ligament reconstruction. , 2006, Arthroscopy : the journal of arthroscopic & related surgery : official publication of the Arthroscopy Association of North America and the International Arthroscopy Association.

[35]  J A Sidles,et al.  Ligament length relationships in the moving knee , 1988, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[36]  S. Yagihashi,et al.  The femoral insertion of the anterior cruciate ligament: discrepancy between macroscopic and histological observations. , 2012, Arthroscopy : the journal of arthroscopic & related surgery : official publication of the Arthroscopy Association of North America and the International Arthroscopy Association.

[37]  Dragan Savic,et al.  Anatomic reconstruction of the anteromedial and posterolateral bundles of the anterior cruciate ligament using hamstring tendon grafts. , 2005, Arthroscopy : the journal of arthroscopic & related surgery : official publication of the Arthroscopy Association of North America and the International Arthroscopy Association.

[38]  S. Woo,et al.  The forces in the anterior cruciate ligament and knee kinematics during a simulated pivot shift test: A human cadaveric study using robotic technology. , 2000, Arthroscopy : the journal of arthroscopic & related surgery : official publication of the Arthroscopy Association of North America and the International Arthroscopy Association.