Influence of mixing waste tobacco stalks and paper mulberry wood chips on the physico-mechanical properties, formaldehyde emission, and termite resistance of particleboard

[1]  D. Tian,et al.  High yield of fermentable sugar from paper mulberry woods using phosphoric acid plus hydrogen peroxide pretreatment: Multifactorial investigation and optimization , 2022, Industrial Crops and Products.

[2]  Chuanshuang Hu,et al.  Developing 3-layer tea oil camellia (Camellia oleifera Abel.) shells-based particleboard with systematic study on particle geometry and distribution , 2022, Industrial Crops and Products.

[3]  N. Leblanc,et al.  Performance of particleboards based on annual plant byproducts bound with bio-adhesives , 2021 .

[4]  Juanito P. Jimenez,et al.  Effect of glueline treatment using tobacco stalk and leaf midrib additives on the bond strength and termite resistance of urea-formaldehyde bonded plywood , 2020 .

[5]  A. Ellis,et al.  Grapevine waste in sustainable hybrid particleboard production. , 2020, Waste management.

[6]  H. Yazıcı.  Feasibility of using waste sweet bay wood (Laurus nobilis L.) in particleboard production , 2020 .

[7]  J. Wachira,et al.  Crop residues used as lignocellulose materials for particleboards formulation , 2020, Heliyon.

[8]  A. Elepaño,et al.  Effect of Tobacco Stalk Additive Particle Size on the Bond Strength and Formaldehyde Emission of Urea Formaldehyde Bonded Plywood , 2020, Philippine Journal of Science.

[9]  G. B. Vidaurre,et al.  Physical properties and formaldehyde emission in particleboards of Eucalyptus sp. and ligno-cellulosic agro-industrial waste , 2020 .

[10]  M. Haruthaithanasan,et al.  Fuel properties of some native tree species for biomass energy in Thailand. , 2020 .

[11]  P. Borysiuk,et al.  Sugar beet pulp as raw material for particleboard production , 2019 .

[12]  Sudarmanto,et al.  Characteristics of Particleboards Made from Agricultural Wastes , 2019, IOP Conference Series: Earth and Environmental Science.

[13]  N. Leblanc,et al.  Properties of particleboards made of agricultural by-products with a classical binder or self-bound , 2019, Industrial Crops and Products.

[14]  H. Savastano Junior,et al.  Bamboo particleboards: recent developments , 2019, Pesquisa Agropecuária Tropical.

[15]  Z. Ahmad,et al.  EFFECT OF ALKALINE TREATMENT ON PROPERTIES OF RATTAN WASTE AND FABRICATED BINDERLESS PARTICLEBOARD , 2018, IIUM Engineering Journal.

[16]  Souvic Sarker,et al.  Extract of Nicotiana tabacum as a potential control agent of Grapholita molesta (Lepidoptera: Tortricidae) , 2018, PloS one.

[17]  R. Lapuz.  Spent Tea Leaves as Extender and Scavenger for Urea Formaldehyde-Bonded Plywood , 2018 .

[18]  R. Wimmer,et al.  Utilizing Miscanthus stalks as raw material for particleboards , 2018 .

[19]  M. Mamiński,et al.  Properties of particleboard produced from post-industrial UF- and PF-bonded plywood , 2018, European Journal of Wood and Wood Products.

[20]  Anilesh Kumar,et al.  Physical and Mechanical Properties of Particle Board made from Lops and Tops of Populus deltoides and Broussonetia papyifera , 2017 .

[21]  Joatilde,et al.  Antitermitic activity of plant essential oils and their major constituentsagainst termite Heterotermes sulcatus (Isoptera: Rhinotermitidae) , 2015 .

[22]  R. J. Cabangon,et al.  Particleboard from waste tea leaves and wood particles , 2014 .

[23]  Francisco Antonio Rocco Lahr,et al.  Particleboard Produced with Sawmill Waste of Different Wood Species , 2014 .

[24]  R. J. Cabangon,et al.  Termite resistance and physico-mechanical properties of particleboard using waste tobacco stalk and wood particles , 2013 .

[25]  H. Pirayesh,et al.  Effect of using walnut/almond shells on the physical, mechanical properties and formaldehyde emission of particleboard , 2013 .

[26]  Seung-Won Oh,et al.  Manufacture and properties of Miscanthus–wood particle composite boards , 2012, Journal of Wood Science.

[27]  N. Ayrilmis,et al.  Evaluation of the physical, mechanical properties and formaldehyde emission of particleboard manufactured from waste stone pine (Pinus pinea L.) cones. , 2010, Bioresource technology.

[28]  Amir Nourbakhsh,et al.  Effect of press cycle time and resin content on physical and mechanical properties of particleboard panels made from the underutilized low-quality raw materials , 2008 .

[29]  Cengiz Guler,et al.  The manufacture of particleboards using mixture of peanut hull (Arachis hypoqaea L.) and European Black pine (Pinus nigra Arnold) wood chips. , 2008, Bioresource technology.

[30]  T. Volk,et al.  Cuticular wax composition of Salix varieties in relation to biomass productivity. , 2008, Phytochemistry.

[31]  Salim Hiziroglu,et al.  Evaluation of surface roughness of commercially manufactured particleboard and medium density fiberboard in Japan , 2007 .

[32]  Almudena Hospido,et al.  Life Cycle Inventory of Particleboard: A Case Study in the Wood Sector (8 pp) , 2006 .

[33]  Gábor Németh,et al.  General waste handling and recycling in particleboard production , 2004 .

[34]  T. A. Qureshi.  Manufacturing of particleboard from paper mulberry (Brosonatia papyrifera) wood , 2001 .

[35]  A. Reiterer,et al.  Experimental evidence for a mechanical function of the cellulose microfibril angle in wood cell walls , 1999 .

[36]  E. Maekawa,et al.  Industrial Utilization of Tobacco Stalks (1) Preliminary Evaluation for Biomass Resources , 1999 .

[37]  D. G. Hepworth,et al.  Modelling the Mechanical Properties of Xylem Tissue from Tobacco Plants (Nicotiana tabacum 'Samsun') by Considering the Importance of Molecular and Micromechanisms , 1998 .