Summary form only given. Spherical and cylindrical many-particle models are being used to simulate RF discharges in which the RF powered and the grounded electrodes have different areas. This asymmetry determines the magnitude of the self-bias voltage Va (the ion bombarding energy) at the powered electrode, which is a critical process parameter. One-dimensional (radial) spherical shell models have been developed, incorporating various assumptions for the sheath and the glow discharges, leading to a scaling which is in agreement with some measurements. The spherical model has been simulated with a nonuniform ionization, and the results agree with the theory. The cylindrical simulation shows that the floating potential plays an important role. The simulation results were obtained graphically as the sheath voltage ratio versus area ratio. The simulation codes are PDC1 (cylindrical) and PDS1 (spherical), which utilize particle-in-cell techniques plus Monte Carlo simulation of electron-neutral and ion-neutral collisions
[1]
William B. Pennebaker,et al.
Electrical properties of RF sputtering systems
,
1979
.
[2]
M. Lieberman,et al.
Bias voltage in finite length, cylindrical and coaxial radio‐frequency discharges
,
1990
.
[3]
W. Lawson.
Particle simulation of bounded 1D Plasma Systems
,
1989
.
[4]
A. Garscadden,et al.
NOTES ON THE EFFECT OF NOISE ON LANGMUIR PROBE CHARACTERISTICS
,
1962
.
[5]
J. Coburn,et al.
Plasma potentials of 13.56-MHz rf argon glow discharges in a planar system
,
1985
.
[6]
A. Pointu.
Model of rf discharges at frequencies greater than the ionic plasma frequency
,
1987
.
[7]
M. Lieberman.
Spherical shell model of an asymmetric rf discharge
,
1989
.
[8]
John P. Verboncoeur,et al.
Simultaneous potential and circuit solution for 1D bounded plasma particle simulation codes
,
1990
.
[9]
B. Chapman,et al.
Glow Discharge Processes: Sputtering and Plasma Etching
,
1980
.